Apeks Dst Status First Stage

Apeks Dst Status First Stage. All medium pressure ports are 3/8" so that the reversible XTX second stage can mount to any of the ports Balanced for superior performance An environmental dry kit comes as standard 4 medium pressure ports 3/8" UNF mounted on a swivel turret 2 high pressure ports 7/16" UNF Polished chrome finish Metal 300 bar DIN handwheel or 2 shot moulded yoke handwheel Compatible to EAN 40, new, out of the box

Apeks Atx 40 Ds4 + Atx 40 Octopus

Apeks Atx 40 Ds4 + Atx 40 Octopus. The DS4 First stage.The performance of the DS4 first stage is the same as the TX-40 and 50 first stage (DST first stage )but has no swivel turret for the LP portsThe ATX40 2nd stage and octopus is smaller and 25% lighter than its TX predecessor. This results in less jaw fatigue and less drag. This pneumatically balanced is ideally suited for an over-balanced Apeks first stage. The diver has full control of the venturi by means of a lever so as to prevent accidental freeflow when the octopus is not being used. The excellent coldwater performance of this octopus is due to the highly efficient heat exchanger on the second stage.No swivel turret4 medium pressure ports, 4 x 3/8" UNF1 high pressure ports, 1 x 7/16" UNF

Apeks Xtx 200 + Xtx 50 Octopus

Apeks Xtx 200 + Xtx 50 Octopus. XTX 200


The XTX200 regulator can be converted from a right handed hose configuration (as supplied from the APEKS factory in the standard) to a left handed one. This regulator also features a Reversible Venturi System (RVS). Changing the regulator to a left handed configuration is both quick and simple and can be performed by any APEKS Authorised Service Technician.
The XTX200 regulator incorporates the new feature of the Diver Changeable Exhaust System (DCE). This system gives the diver the ability to change from a small exhaust to a large exhaust tee. This gives the user a choice of the wider exhaust tee for minimal bubble interference (essential for underwater photography) and the narrow exhaust tee for a smaller compact comfortable regulator (ideal for travel or for use as an octopus regulator). The exhausts are made from strong, yet light-weight material, essential for the diving environment. We also supply different coloured mouthpieces and exhausts for regulator individualisation which is very useful when using multiple regulators with different mixes.

The XTX200 regulator incorporates a new front cover manufactured using high strength plastic which greatly improves the durability of the most vulnerable part of the demand valve and an aesthetically pleasing chrome plated metal insert immediately identifying this regulator as a top of the range model.

The new purge button has improved the purge itself. Due to the new open design the purge is self clearing and prevents debris build-up.

The new ergonomic Venturi lever of the XTX200 has been designed to reduce the amount of grit ingress and also incorporate an index-able, tactile / audible ratchet Venturi lever mechanism.

A new silicone exhaust valve has been used on the XTX200 regulator improving breathing performance.

Weight: Yoke 1280g ... DIN 1150g

Specifications:
First Stage

- Compact one piece body

- 4 angled medium pressure ports, 4 x 3/8" UNF

- 2 angled high pressure ports, 2 x 7/16" UNF

- Environmentally dry sealed system

- Attractive black and luxurious satin silver chrome finish

- Balanced for superior performance

- Removable ARCAP valve seat

Second Stage

- Adjustable cracking control

- Integrated venturi control

- Pneumatically balanced valve design

- Micro Adjuster

- Suitable for cold water use

- Bright Chrome Finish

- Right or Left hand hose configuration

- Metal Inserted front cover

- New Optional Extra Hose Swivel connection

- Changeable Exhaust Tees (DCE, Diver Changeable Exhaust) (Both sets supplied)

- Nitrox versions available


XTX 50 Octopus

he XTX50 regulator can be converted from a right handed hose configuration (as supplied from the APEKS factory in the standard) to a left handed one. This feature is known as the Reversible Venturi System (RVS). Changing the regulator to a left handed configuration is both quick and simple and can be performed by any APEKS Authorised Service Technician.
The XTX50 regulator incorporates the new feature of Diver Changeable Exhausts system (DCE). This system gives the diver the ability to change from a small exhaust tee to a large exhaust tee. This gives the user a choice of the wider exhaust tee for minimal bubble interference (essential for underwater photography) and the narrow exhaust tee for a smaller compact comfortable regulator (ideal for use as an octopus regulator).

The XTX50 regulator incorporates a new two-shot high strength composite front cover, improving the durability of the most vulnerable part of the demand valve.

The new ergonomic Venturi lever of the XTX50 has been designed to reduce the amount of grit ingress.

A new silicone exhaust valve has been used on the XTX50 regulator improving breathing performance.

Weight: Yoke 1280g ... DIN 1140g

Specifications:

Adjustable cracking control

Integrated venturi control

Pneumatically balanced valve design

Micro Adjuster

Suitable for cold water use

Bright Chrome Finish

Right or Left hand hose configuration

Two shot plastic front cover

Changeable Exhaust Tees (DCE, Diver Changeable Exhaust) (Both sets supplied)

Nitrox and Octopus versions available

Apeks Xtx 50 + Xtx 20 Octopus

Apeks Xtx 50 + Xtx 20 Octopus. XTX50The XTX50 regulator can be converted from a right handed hose configuration (as supplied from the APEKS factory in the standard) to a left handed one. This feature is known as the Reversible Venturi System (RVS). Changing the regulator to a left handed configuration is both quick and simple and can be performed by any APEKS Authorised Service Technician. The XTX50 regulator incorporates the new feature of Diver Changeable Exhausts system (DCE). This system gives the diver the ability to change from a small exhaust tee to a large exhaust tee. This gives the user a choice of the wider exhaust tee for minimal bubble interference (essential for underwater photography) and the narrow exhaust tee for a smaller compact comfortable regulator (ideal for use as an octopus regulator). The XTX50 regulator incorporates a new two-shot high strength composite front cover, improving the durability of the most vulnerable part of the demand valve.The new ergonomic Venturi lever of the XTX50 has been designed to reduce the amount of grit ingress.A new silicone exhaust valve has been used on the XTX50 regulator improving breathing performance.Weight: Yoke 1280g ... DIN 1140g Specifications:First StageSwivel turret body 4 medium pressure ports, 4 x 3/8" UNF 2 high pressure ports, 2 x 7/16" UNF Environmentally dry sealed system Polished chrome finish Balanced for superior performance Second StageAdjustable cracking control Integrated venturi control Pneumatically balanced valve design Micro Adjuster Suitable for cold water use Bright Chrome Finish Right or Left hand hose configuration Two shot plastic front cover Changeable Exhaust Tees (DCE, Diver Changeable Exhaust) (Both sets supplied) Nitrox and Octopus versions available XTX20 OCTOPUSThe XTX20 warm water regulator can be converted from a right handed hose configuration (as supplied from the APEKS factory in the standard) to a left handed one. This feature is known as the Reversible Venturi System (RVS). Changing the regulator to a left handed configuration is both quick and simple and can be performed by any APEKS Authorised Service Technician. The XTX20 regulator incorporates the new feature of Diver Changeable Exhausts system (DCE). This system gives the diver the ability to change from a small exhaust tee to a large exhaust tee. This gives the user a choice of the wider exhaust tee for minimal bubble interference (essential for underwater photography) and the narrow exhaust tee for a smaller compact comfortable regulator (ideal for use as an octopus regulator). The XTX20 regulator incorporates a new two-shot high strength composite front cover, improving the durability of the most vulnerable part of the demand valve.The new ergonomic Venturi lever of the XTX20 has been designed to reduce the amount of grit ingress.A new silicone exhaust valve has been used on the XTX20 regulator improving breathing performance. Specifications Second StageIntegrated venturi control Pneumatically balanced valve design Bright Chrome Finish Suitable for warm water use only Two-shot plastic front cover Changeable Exhaust Tees (DCE, Diver Changeable Exhaust) (only one set supplied)New Optional Extra Hose Swivel connection Octopus version available

Apeks Xtx 50 + Octopus Egress

Apeks Xtx 50 + Octopus Egress. XTX50

The XTX50 regulator can be converted from a right handed hose configuration (as supplied from the APEKS factory in the standard) to a left handed one. This feature is known as the Reversible Venturi System (RVS). Changing the regulator to a left handed configuration is both quick and simple and can be performed by any APEKS Authorised Service Technician.
The XTX50 regulator incorporates the new feature of Diver Changeable Exhausts system (DCE). This system gives the diver the ability to change from a small exhaust tee to a large exhaust tee. This gives the user a choice of the wider exhaust tee for minimal bubble interference (essential for underwater photography) and the narrow exhaust tee for a smaller compact comfortable regulator (ideal for use as an octopus regulator).

The XTX50 regulator incorporates a new two-shot high strength composite front cover, improving the durability of the most vulnerable part of the demand valve.

The new ergonomic Venturi lever of the XTX50 has been designed to reduce the amount of grit ingress.

A new silicone exhaust valve has been used on the XTX50 regulator improving breathing performance.

Weight: Yoke 1280g ... DIN 1140g

Specifications:

First Stage

Swivel turret body

4 medium pressure ports, 4 x 3/8" UNF

2 high pressure ports, 2 x 7/16" UNF

Environmentally dry sealed system

Polished chrome finish

Balanced for superior performance


Second Stage

Adjustable cracking control

Integrated venturi control

Pneumatically balanced valve design

Micro Adjuster

Suitable for cold water use

Bright Chrome Finish

Right or Left hand hose configuration

Two shot plastic front cover

Changeable Exhaust Tees (DCE, Diver Changeable Exhaust) (Both sets supplied)

Nitrox and Octopus versions available


EGRESS OCTOPUS

Egress means way out, exit, escape - the perfect description for an ideal octopus. The Apeks Egress has been designed as a left and right hand second stage regulator perfect for octopus use and emergency buddy breathing situations. It is, however, also entirely suitable as a left and right handed primary second stage compatible with any Apeks first stage. If used with an unsealed first stage then it is only recommended for warm waters, but is suitable for cold water diving when used with any Apeks environmentally sealed first stage.

Egress Features

Can be used either way up

Can be routed over either shoulder

Low profile ensures less drag in water and keeps it close to the body out of the way

Bright colours ensure visibility in panic situations

Rubber feel helps you get hold of it easily in panic situations

Large purge - easy to use either way up

Balanced valve mechanism

Simple to use, reliable and easily maintained

Effortless breathe due to the balanced mechanism

Hose/mouthpiece layout is ideal for emergency buddy breathing

Cold water compatible - CE approved

The Egress second stage is a quality, high performance piece of equipment you would expect from Apeks but at a remarkable price.

Apeks Tek 3 Set

Apeks Tek 3 Set. Apeks introduce the new Tek3 1st stages designed specifically for use on a twinset. The new TEK3 1st stage regulators are designed for use with twin cylinder configuration.The system benefits from streamlined hoses with little chance of accidental snagging and also improved ease of access to cylinder valves. Each 1st stage has 3 medium pressure ports and one high pressure port. They are balanced, cold water compatible and extremely robust. The TEK3 looks great too.This set contains :- 2 x First stages- 2 x 2nd stages (xtx50)- 1 x Backup reg hose- 1 x Long reg hose (2m)- 1 x Primary reg necklaceThe TEK3 1st stage can also be purchased individually as a left or right hand version or together as a pair.First Stage Specifications- Compact solid one piece body- 3 medium pressure ports, 3 x 3/8" UNF- 1 high pressure port, 1 x 7/16" UNF- Environmentally dry sealed system- Stylish bright chrome finish- Balanced for superior performance- Metal hand wheels- Proven technology used by technical divers worldwide- Maximum working pressure 300 BAR

Apeks Xtx 200 Nitrox

Apeks Xtx 200 Nitrox. As they leave the factory standard Apeks regulators are suitable for use with oxygen enriched gases providing the oxygen content does NOT EXCEED 40%*. For mixtures containing more than 40% we offer a range of regulators suitable for use with Nitrox and Oxygen (also known as oxygen enriched air or EAN - Enriched Air Nitrox). Our comprehensive range, for all you dive requirements comprises the DS4 first stage and the XTX200, XTX100, XTX50, XTX40 regulators. This equipment has been specially cleaned and assembled in our purpose built class J (10,000) Clean Room using oxygen safe components and lubricants and are suitable for 100% oxygen use. All first stages are available in yoke (A) clamp or DIN fitting. * Nitrox equipment will be supplied in Europe in accordance with the EN 144-3 and the EN13949 which states that equipment sold in CEE (European Community) countries over 21% and up to 100% will be manufactured with the special M26 fitting.Standard Apeks regulators can be professionally converted to oxygen service and oxygen compatibility kits are available to Apeks dealers together with instructions for O2 use. XTX 200The XTX200 regulator can be converted from a right handed hose configuration (as supplied from the APEKS factory in the standard) to a left handed one. This regulator also features a Reversible Venturi System (RVS). Changing the regulator to a left handed configuration is both quick and simple and can be performed by any APEKS Authorised Service Technician. The XTX200 regulator incorporates the new feature of the Diver Changeable Exhaust System (DCE). This system gives the diver the ability to change from a small exhaust to a large exhaust tee. This gives the user a choice of the wider exhaust tee for minimal bubble interference (essential for underwater photography) and the narrow exhaust tee for a smaller compact comfortable regulator (ideal for travel or for use as an octopus regulator). The exhausts are made from strong, yet light-weight material, essential for the diving environment. We also supply different coloured mouthpieces and exhausts for regulator individualisation which is very useful when using multiple regulators with different mixes. The XTX200 regulator incorporates a new front cover manufactured using high strength plastic which greatly improves the durability of the most vulnerable part of the demand valve and an aesthetically pleasing chrome plated metal insert immediately identifying this regulator as a top of the range model.The new purge button has improved the purge itself. Due to the new open design the purge is self clearing and prevents debris build-up.The new ergonomic Venturi lever of the XTX200 has been designed to reduce the amount of grit ingress and also incorporate an index-able, tactile / audible ratchet Venturi lever mechanism.A new silicone exhaust valve has been used on the XTX200 regulator improving breathing performance.Weight: Yoke 1280g ... DIN 1150g Specifications: First Stage- Compact one piece body - 4 angled medium pressure ports, 4 x 3/8" UNF - 2 angled high pressure ports, 2 x 7/16" UNF - Environmentally dry sealed system - Attractive black and luxurious satin silver chrome finish - Balanced for superior performance - Removable ARCAP valve seat Second Stage- Adjustable cracking control - Integrated venturi control - Pneumatically balanced valve design - Micro Adjuster - Suitable for cold water use - Bright Chrome Finish - Right or Left hand hose configuration - Metal Inserted front cover - New Optional Extra Hose Swivel connection - Changeable Exhaust Tees (DCE, Diver Changeable Exhaust) (Both sets supplied)