Hollis Sms Bungee (2 Pcs)

Hollis Sms Bungee (2 Pcs). Rubber Tank Wrap Kit (Pair)

Hollis S25 Lx Wing With Slots 11l

Hollis S25 Lx Wing With Slots 11l. We are proud to release the new LX wing range, developed and tested by technical divers and 3 years in the making.Quality and performance are the two most integral features of our products, which is why we have reintroduced the proven S series and C series wings with key improvements. New materials include a 1680D Cordura for the exterior bladder and 420 nylon for the internal bladder. The LX design also includes a 360 degree internal retraction system. This has been added to match the design of the wing, allowing for a streamlined rig at all times. We have also added a new oval corrugated hose, redesigned OPV and stainless grommets to replace the mesh on the bottom of the wing.Every new LX wing includes a lifetime warranty.FEATURES:-Models include the S25 LX, S38 LX, C45 LX and C60 LX.-Welded flange and one piece retainer for servicing without the need for tools.-Outer shell constructed of HD Laminated 1680D Cordura.-420 nylon internal bladder.-Centrally located elbow to avoid tank valve/regulator interference.-Lower left pull relief valve.-Cam band slots.-Lifetime Warranty.

Hollis Sms 50 Travel

Hollis Sms 50 Travel. Hollis "SMS" sidemount systems have been designed not just with cave divers in mind, but any sidemount diver. The new SMS50 is no exception. Built for sidemount only, this kit can be used in any environment from open water to overhead. Includes an adjustable, one size fits most harness based on a minimalist design; ideal for traveling sidemounters. First of its kind harness, wing and plate in one and ready to dive out of the box. Features:- Inner located elbow to avoid overhead interference- Built-in trim pockets - 3lbs upper shoulders & 3lbs (Pair) located on inner panel- Neoprene covered shoulder straps- Ready out of the box! (2) Tank bungees, (2) SS Cam bands, (4) SS Bolt snaps & line included with kit- Also includes a Sternum strap & Crotch strap- Low lift design for warm water with AL80s- Full visibility over your system - tanks, valves, regulators all within eyesight and adjustable at depth- Reduces additional gear: Doubles bands / Hardware / Manifold - Benefit when traveling- Aids in transporting gear to and from the beach or boat - one tank at a time- Streamlines profile which in turn reduces drag increasing your bottom timeSpecifications:- Air Cell - 23 lbs Lift- Rugged 1000 Denier Cordura- Sidemount Only harness- System weight 5 pounds

Hollis Stainless Steel

Hollis Stainless Steel. - Stainless Steel Backplate.- Lower Corners Bent for a More Comfortable Fit. - Deburred to Prevent any Strap or Bladder Wear. - 1" & 2" Crotch Strap Slots.- Cam Band Slots.- Weight Stainless Steel: 5.5 lbs / 2,2 kg

Hollis Solo Harness System

Hollis Solo Harness System. Designed to meet all the needs of demanding technical divers, the Solo Harness System is clean, simple, and foolproof!Features:- Streamlined design enhances comfort with less drag.- Continuous one piece harness system limits failure potential.- Stainless steel D-rings and cam buckle included.- Removable shoulder pads accept stainless steel D-rings.- Backplate sold separately. - System weight (harness only): 1lb (0.45kg). - Solo Harness: One Size, Trim To Fit(Backplate not included).

Hollis Sms100 Sidemount System

Hollis Sms100 Sidemount System. Our SMS100 Sidemount system was designed not just with the sidemount cave divers in mind, but any diver. Whether you are a beginner, advanced or technical diver, this kit was designed for you. Suitable for sidemounting twin or single cylinders, but also for use with rebreathers or rear mounted singles. This "go anywhere" system can be used in any environment from open water to the overhead environment.The Advantages:-Full visibility over your system.-Reduces additional gear: Doubles bands / Hardware / Manifold - Benefit when traveling.-Aids in transporting gear to and from the beach or boat - one tank at a time.-Streamlines profile which in turn reduces drag increasing your bottom time.Details:- 360 Degree wing - 52 lbs Lift.- Bulletproof Construction.- Single or Dual wing options available.- Centrally and uppermost located elbow to avoid overhead interference.- Upper/Lower cam band slots for rear mounted single t.Specifications:- 1000 denier CorduraTM w/ PU lamination outer shell & 15mil urethane internal bladder. - Streamlined design for reduced drag and passing through confined spaces.- Lower left pull relief valve on SMS100 wing + Lower right on SMS100D wing.- Includes elastic bungee system (removable).

Oms Wing Bc116 45 Lb

Oms Wing Bc116 45 Lb. BCs without retraction bands.The OMS® 32 lb., 45 lb., 60 lb. lift non-retraction BCs are made from the same superior materials as the banded BC’s. They incorporate a pull dump located at the diver’s side lower left and an inflator hose exiting the center or slightly off center of the BC tank side.Slots are provided in the non inflated area for Cam Band usage.BC116-32B Non retraction single tank BC 32 lb. lift / Black 32 lb (14.5 kg) lift BC116-32R Non retraction single tank BC 32 lb. lift / Red 32 lb (14.5 kg) lift BC116-45B Non-retraction Single Bladder BC 45 lb. lift/ Black 45 lb (20.4 kg) lift BC116-60B Non-retraction Single Bladder BC 60 lb. lift/ Black 60 lb (27.2 kg) lift BC116-60R Non-retraction Single Bladder BC 60 lb. lift/ RED 60 lb (27.2 kg) lift Note: All stated BC lift capacities are +/- 2 lb. (1 kg)OMS ® BC’SNASA, NOAA, NPS, World Class Record holders, deep explorers and those who simply demand the best specify OMS® BC’s.Pull down the zipper of the outer cover of the OMS® BC and you will see 1000 denier Nylon fabric backed with 5 to 6 oz. of Thermoplastic Polyurethane (TPU) and on the Chemically Resistant BC’s 5-6 oz. TPU front and back . This thicker TPU coating helps prevent abrasion and increases puncture resistance. Most competitors use only 1/2 oz. or no urethane backing on their BC covers making them susceptible to punctures, abrasion and subsequent leaks.Housed inside the outer cover we use a puncture resistant bladder constructed from 200 denier Nylon fabric backed with .12 mm of TPU. Most of our competitors use only a thin plastic film bladder that is more susceptible to damage.There are other differences such as 100% quality assurance inspection for leaks, imperfections and defects before your OMS® BC is delivered. Elastomeric Retraction Band BC Features :1. DUAL BLADDER: Inflator hoses and Dump valves are interchangeable for a variety of unique hose configurations. The dual bladder model features a total of four (4) pull dump valves located:Divers Side bladder: lower left and top rightTank Side bladder: lower right and top left Colors: Black or Red2. SINGLE BLADDER: The single bladder model has two (2) relief valves located: divers right shoulder and divers lower left. Inflator hoses and Dump valves are interchangeable Colors: Black or Red (45 lb. & 60 lb. Black only)3. POWER DEFLATION / ORAL INFLATION: The unique elastomeric bands (use is optional) assist in deflation, but still allow the diver to orally inflate the BC.4. ELIMINATION OF AIR SHIFT: The OMS® elastomeric bands evenly compress the BC, eliminating the massive airshift associated with non-banded BCs that typically occurs when changing body plane.5. LOW DRAG / LOW SNAG: The OMS® bands typically retract the BC to a width less than the divers shoulders greatly reducing Drag and Snag potential.6. TRIM ADJUSTABILITY: By adding or eliminating bands in different parts of the BC, the diver can adjust: a) lateral trim to compensate for stage bottles, cameras, etc. b) Horizontal trim e.g. head up, down or level.7. Cam Band accommodation: (2) Top and (2) Bottom Slots are positioned in the non inflated area for Cam Band usage.Weight: 1,5kg aprox

Oms Backplate Stainless Steel

Oms Backplate Stainless Steel. Stainless Back Plate (5.75 lb) 2.60 Kg