Garmin Slide Transducer For Echo & Echomap Fishfinders

Garmin Slide Transducer For Echo & Echomap Fishfinders. Easily collect speed data and send it to your echo fishfinder with our water sensor.Simply mount our speed sensor on the transom of your vessel and connect it to your device. The paddle wheel on the speed sensor turns as the vessel moves through the water, and speed data is collected and displayed on your device.This sensor sends data to boat speed sensor to a compatible echo series. Design features a transom mount with accessory 4-pin plug.Compatible Devices:echo 200echo 201echo 201dvecho 300cecho 301cecho 301dvecho 500cecho 501cecho 550cecho 551cecho 551dv

Garmin Transom Mount Transducer 1 Kw For Gsd24

Garmin Transom Mount Transducer 1 Kw For Gsd24. The only 1 kW 8-pin transom mount transducer, it has a depth of 1,800 to 2,500 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 19 to 6 degrees; and mounts on a 2 to 20 degree transom.Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.When using with a 6-pin Garmin sounder, transducer adapter cable part number 010-11612-00 is required.Compatible Devices:GPSMAP 720/720sGPSMAP 1020xsGPSMAP 421/421sGPSMAP 521/521sGPSMAP 527xsGPSMAP 721xsGPSMAP 820xsGSD 22GSD 24

Garmin Bronze Thru-hull Mount Transducer 1 Kw With Fairing Block High Performance For Gsd24

Garmin Bronze Thru-hull Mount Transducer 1 Kw With Fairing Block High Performance For Gsd24. Our bronze thru-hull mount transducer works well in deep water.A popular narrow beam, this 8-pin 1 kW transducer has a depth of 1,800 to 2,500 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 19 to 6 degrees; and a 0 to 20 degree deadrise.Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.When using with a 6-pin Garmin sounder, transducer adapter cable part number 010-11612-00 is required.

Garmin Chrimp Thru-hull Mount Transducer 500 W 0 Tilt 80/130 Khz

Garmin Chrimp Thru-hull Mount Transducer 500 W 0 Tilt 80/130 Khz. Our bronze thru-hull mount transducer is designed to allow both traditional and spread spectrum scanning when used with a compatible sonar like the GSD 26.A 600 W transducer with 8 pins, it has a depth of 800 ft; an operating frequency of 80-130 kHz; a beamwidth of 24/16 degrees; and a 0 to 7 degree deadrise.Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.Compatible Devices:GPSMAP 1020xsGPSMAP 1040xsGPSMAP 527xsGPSMAP 547xsGPSMAP 721xsGPSMAP 741xsGPSMAP 820xsGPSMAP 840xsGSD 26 CHIRP Professional Sonar Module

Garmin Chrimp Thru-hull Mount Transducer 1 Kw 0 Tilt 130/210 Khz

Garmin Chrimp Thru-hull Mount Transducer 1 Kw 0 Tilt 130/210 Khz. Step up to 1 kW without a fairing with this flush-mounted bronze housing that protrudes less than 1/4" outside the hull and can sit on the trailer rollers/bunks without damage.The tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. And, low, medium and high frequency versions provide maximum flexibility for the choice of frequencies.An excellent choice for fiberglass and wood hulls, this 8-pin transducer has a depth of 3,000 ft; an operating frequency of 130-210 kHz; a beamwidth of 6-10 degrees; and a 0 to 7 degree deadrise.Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.

Garmin Chrimp Thru-hull Mount Transducer 1 Kw 0 Tilt 40/75 Khz

Garmin Chrimp Thru-hull Mount Transducer 1 Kw 0 Tilt 40/75 Khz. Step up to 1 kW without a fairing with this flush-mounted bronze housing that protrudes less than 1/4" outside the hull and can sit on the trailer rollers/bunks without damage.The tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. And, low, medium and high frequency versions provide maximum flexibility for the choice of frequencies.An excellent choice for fiberglass and wood hulls, this 8-pin transducer has a depth of 3,000 ft; an operating frequency of 40-60 kHz; a beamwidth of 16-25 degrees; and a 0 to 7 degree deadrise.Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.Compatible Devices:GPSMAP 1020xsGPSMAP 1040xsGPSMAP 527xsGPSMAP 547xsGPSMAP 721xsGPSMAP 741xsGPSMAP 820xsGPSMAP 840xsGSD 26 CHIRP Professional Sonar Module

Garmin Chrimp Thru-hull Mount Transducer 1 Kw With Fairing Block

Garmin Chrimp Thru-hull Mount Transducer 1 Kw With Fairing Block. Our best performing 1 kW thru-hull transducer, this bare wire mount performs well in deep water and has exceptional bottom and water column detail.This transducer has a depth of 3,000 ft; an operating frequency of 42 to 65 kHz and 130 to 210 kHz; a beamwidth of 16 to 25 degrees and 6 to 10 degrees; and a 0 to 20 degree deadrise.Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.

Garmin Vhf 100i Black

Garmin Vhf 100i Black. The VHF 100 has an intuitive design and provides radio communication for convenience and safety.Communicate with ConfidenceWith up to 25 watts of transmit power at your fingertips, you’ll be able to stay in touch anywhere on the water. So no matter where you are or where you’re heading, you’ll always have a line of communication open to make sure every voyage is a safer voyage.Safety FirstThe VHF 100 provides full Class D Digital Selective Calling (DSC) capability via NMEA 0183 interface. Should trouble arise, DSC provides distress calls with the push of a button. And if your boat is already interfaced with a compatible GPS chartplotter, you’ll get mayday signaling and a digital broadcast of your boat’s position. The VHF 100 also features NOAA weather alerts and Position Tracking, which allows you to locate and keep tabs on up to 3 other boats in the area.At-a-glance InformationThe VHF 100 has a simple interface that’s easy to read while on the go, so you’ll always have the right information at the right time. In addition to dedicated buttons and knobs for ease of use, the VHF 100 features 3 soft keys linked to onscreen menus that allows you to see and select the information you want. The VHF 100 also offers premium sound quality so every message is loud and clear. And to make sure the data stands out, the information is available on a 3.2" (8.13 cm) display — the largest screen available in its class.Detailed DesignThe VHF 100 can be mounted in a variety of configurations. With removable front caps, the VHF 100 can be easily added in cockpit consoles or cabin bulkheads. It’s the only front flush-mounting capable marine radio available on the market today, which makes the VHF 100 as flexible as it is functional. It’s made to last with rugged design that’s also submersible (IPX7 standards), so you’ll get a full-featured marine receiver that’s ready to go in a compact fixed-mount design.Specifications: - Waterproof: yes (IPX7)- Temperature Range: from 14ºF to 122ºF (from -10ºC to 50ºC)- Compass-safe Distance: 20 in. (500 mm)- Speaker Microphone Audio Power: 94 dBA- Digital Selective Calling: Class D- Frequency Bands: All USA, Canadian, and International marine channels; 10 NOAA weather channels- Operating Voltage: 12.0 Vdc- Current Drain: Standby: 350 mA; Receive: 600 mA; Transmit: 6.0 A at HI power (25 W); 2.0 A at LO power (1 W)- Transmitter Output (at 13.6 Vdc): 25 W (HI); 1 W (LO)- Frequency Range: 156.050 MHz to 163.275 MHz (including WX channels)Whats in the Box:- VHF 100- Power cable- Bail mount and knobs- Flush mount gasket- Marine mounting screws- Mic hanger- Protective cover- DocumentationCompatible Devices:GPSMAP 4008GPSMAP 4010GPSMAP 4012GPSMAP 451GPSMAP 451sGPSMAP 5008GPSMAP 5012GPSMAP 5015GPSMAP 521GPSMAP 521sGPSMAP 551GPSMAP 551sGPSMAP 556GPSMAP 556sGPSMAP 6008GPSMAP 6012GPSMAP 7012GPSMAP 7015GPSMAP 720GPSMAP 750GPSMAP 8008 MFDGPSMAP 8012 MFDGPSMAP 8015 MFDGPSMAP 8500 Black BoxGPSMAP 8530 Black Box