Sea And Sea Sea Arm 8 Extra Grip (right Arm)

Sea And Sea Sea Arm 8 Extra Grip (right Arm). Ergonomically designed grip.The bracket shoe or the Ball Base for Accessory can be mounted on the grip.Equipped with a lanyard hole.Dimensions (WxHxD): 52x120x15mm/ 2.1x4.8x0.6inch Weight: 111g/ 3.9ozConstruction: corrosion-resistant aluminum alloy (anodized body)

Sea And Sea Sea Arm 8 Accessory Shoe Ball Base

Sea And Sea Sea Arm 8 Accessory Shoe Ball Base. Attaches to the Accessory Shoe on a Sea and Sea housing.A YS series strobe can be attached with the Ball Clamp and the Strobe Head S.Lenght: 63 mm/ 2.5 inchWeight: 70 g/ 2.5 ozConstruction: corrosion-resistant aluminum alloy (anodized body)

Sea And Sea Arm 8 Camera Tray + Grip

Sea And Sea Arm 8 Camera Tray + Grip. Grip with a universal camera housing tray that is compatible with most compact camera housings on the market.- Dimensions (WxHxD):217x130x77mm/ 8.7x5.2x3.1 inch- Weight: 275 g/ 9.6 oz- Construction:Camera Base/ Camera Base Adapter/ Extra Grip: Corrosion-resistant aluminum alloy (anodized body)Camera Base Rubber: Ethylene-propylene-diene rubber

Sea And Sea Sea Arm 8 Ball Clamp

Sea And Sea Sea Arm 8 Ball Clamp. Used to hold two ball joints together.Dimensions (WxHxD): 65x67.5x25 mm/ 2.6x2.7x1 inchWeight: 67 g/ 2.3 ozConstruction: corrosion-resistant aluminum alloy (anodized body)

Sea And Sea Sea Arm 8 Double Ball Arm L

Sea And Sea Sea Arm 8 Double Ball Arm L. Lenght: 323 mm/ 12.9 inchWeight: 110 g/ 3.9 ozConstruction: corrosion-resistant aluminum alloy (anodized body)

Sea And Sea Sea Arm 8 Double Ball Arm S

Sea And Sea Sea Arm 8 Double Ball Arm S. Lenght: 143 mm / 5.7 inchWeight: 60 g/ 2.1 ozConstruction: corrosion-resistant aluminum alloy (anodized body)

Sea And Sea Ys-02 Strobe

Sea And Sea Ys-02 Strobe. From compact digital cameras to digital SLR cameras. A small manual slave strobe.- FeaturesA manual strobe with exceptional cost performance.Circular beam angle of 100° × 100° and guide number of up to 20. The YS-02 is a new compact-type slave strobe that can be used for all applications from wide-angle to macro photography.You can use the YS-02 as a manual slave strobe with the guide number control function, which can set the light level to any of ten levels. Accurate pictures that follow the photographers intentions can be taken while the light level is adjusted with the guide number controller. The YS-02 is equipped with a pre-flash cancel mode (*1) that is compatible with a wide range of digital cameras with a pre-flash. Power comes from four AA batteries for a powerful and long-lasting strobe, so you can enjoy taking pictures all day long without having to recharge the batteries. The recycle time takes about two seconds with nickel-metal hydride batteries (2700 mAh) for stress-free continuous shooting.You can fully exercise your creativity with the YS-02, which can be used as a primary strobe or secondary strobe in a wide range of applications, from compact digital cameras to digital SLR cameras.*1 Some digital cameras adjust flash levels after a first flash and then capture an image with a second (main) flash. This first flash is called the pre-flash. The strobe’s pre-flash cancel function ignores the pre-flash and synchronizes the strobe with the main flash.- Specifications[ YS-02 ] [Guide Number (ISO 100/m) (land)] 20[Beam Angle] 100°x 100° (with diffuser 110°x110°)[Batteries] 4xAA A: 6V Ni-MH: 4.8V[Number of Flashes*1] A: 230 Ni-MH: 330[Recycle time (full)*2] A: 2.5 sec. Ni-MH: 1.9 sec.[Color temperature] 5600K[Color temperature w/diffuser] 5250K[Depth rating] 75m / 250ft[Dimensions (WxHxD)] 68x108x129mm / 2.7x4.3x5.2inch[Weight] 500g / 17.5oz[Underwater weight] -5g / -0.2oz[Others]- Exposure control: Light level control dial (GN): 1 / 1.4 / 2 / 2.8 / 4 / 5.6 / 8 / 11 / 16 / 20 (10 steps)- Pre-flash control: Equipped with pre-flash cancel mode- Slave function- Auto power OFF function- Sync cord: Fiber-Optic Cable (L-type)- NOT INCLUDED- Over-pressure relief valve