Gopro Anti-fog Inserts

Gopro Anti-fog Inserts. Prevent your camera-s housing from fogging, even in cold temperatures/humid environments. Great value and performance: includes 3 sets of anti-fog inserts. Each set lasts 4-5 uses and can be dried in an oven (3 minutes) and used again. What-s Included:

* 3 Sets of Anti-Fog Inserts

Gopro Vented Helmet Strap Mount

Gopro Vented Helmet Strap Mount. Vented helmet strap for your quick-release HERO camera.

One size fits all adjustability.

Compatible with all GoPro quick-release cameras including the Helmet HERO Wide, Motorsports HERO Wide, Motorsports HERO, Surf HERO, and WIDE HERO cameras.

NOT compatible with the Digital HERO 5 Wrist Camera.


Whats Included:

-1 Adjustable Strap for Vented Helmets


Construction: polycarbonate

Strap: nylon

Gopro Lente Recambio 170º Gran Angular.

Gopro Lente Recambio 170º Gran Angular.. Kit comes with two replacements for the wide-angle glass lens covers which used on all wide-angle Hero housings.

Compatible with all Wide Angle GoPro cameras...including the Helmet HERO Wide, Motorsports HERO Wide, Surf HERO, and WIDE HERO cameras.

*NOT* compatible with Standard Angle cameras.

Whats Included:

-2 Wide-Angle, Glass Lens Covers

-2 Rubber O-Rings

-6 Screws

-1 Screwdriver


Construction: polycarbonate

Hardware: stainless steel

Gopro Suction Cup Mount

Gopro Suction Cup Mount. Industrial strength suction cup for your quick-release HERO camera. This is the suction cup mount that comes with the Motorsports HERO and Motorsports HERO Wide cameras. Strong enough to pull dents out of a car door (unfortunately tested and proven by GoPro) or stay attached to an airplane at 200mph+, proven though not endorsed by GoPro per FAA rules.

Perfect if you own a Helmet HERO, Surf HERO, or Wide HERO camera and want to add a suction cup mount to your arsenal. Attaches to cars, motorcycles, snowmobiles, cockpits, you name it.

NOT RECOMMENDED for surfboards, snowboards or other high-impact sports. Only recommended for non-impact activities.

What-s Included:

* 1 Suction Cup Camera Mount
* 1 Rotational Joiner Arm
* Warranty: 1 Year

Gopro Carcasa Wide Hero

Gopro Carcasa Wide Hero. Wrist housing for your Helmet, Motorsports, or Surf HERO Wide, 170º lens camera.

NOTE: This housing is NOT compatible with the new HD HERO Cameras. An HD HERO wrist housing is also available.

Dubbed the HERO Wide Wrist Housing, this wrist-worn water housing for your GoPro Wide 170º lens camera is the world-s most convenient solution for shooting on-the-go footage of your friends and family during your favorite activities, be it on the mountain or in the water.

Originally designed for surfing in big wave haven, Northern California, the housing is a engineered for maximum convenience as well as maximum durability. Perfect for surfing or snorkeling, hiking or climbing, the HERO Wide Wrist Housing makes it easy to have a camera on hand for video and photo opportunities that occur at times where traditional cameras are too inconvenient to use or carry. No pockets- No problem if you are wearing the HERO Wide Wrist Housing.

Thanks to its patented design, the HERO Wide Wrist Housing can be worn securely flat on the wrist during your sport but can quickly pivot upright for aiming the shot. Even in this upright position, the camera is still securely attached to your wrist. This makes it easy to grab your surfboard, paddle, or otherwise have both hands free without a risk of dropping your camera. The water housing is waterproof to 100′/30 meters.

The housing can also be strapped to gear such as kayak paddles and the leading edge of kitesurfing kites. This allows the kitesurfer to film their entire session looking down from above, as though they had a private helicopter camera crew following them while they surf.

The HERO Wide Wrist Housing has an adjustable neoprene strap that adjusts to fit a range of sizes from a child-s wrist to fitting over the ski jacket sleeve of an adult.

Compatible ONLY with HERO Wide cameras (170º wide angle of view lens).

NOT compatible with HD HERO cameras.

What-s Included:

* 1 Shockproof/Waterproof HERO Wide Pivoting Wrist Housing
* 1 Neoprene and Velcro® Wrist Strap (One Size Fits All)
* Warranty: One Year

Camera not included

Gopro Roll Bar Mount

Gopro Roll Bar Mount. Roll bar tube clamp for mounting your quick-release GoPro camera on to tubes & frames ranging from 1.4″ to 2.5″ (3.5cm - 6.35cm) in diameter.

Perfect for clamping your camera to the radiator cap (both metal and plastic caps) on karts.

You can also clamp to bike frames, bumper bars, ski/surfboard racks, or anything else that is in the size range above.

Comes with pivoting orientation arms allowing for 3-way adjustability, ensuring you can get the angle you want.

Compatible with all GoPro quick-release cameras including the Helmet HERO Wide, Motorsports HERO Wide, Motorsports HERO, Surf HERO, and WIDE HERO cameras. Not compatible with the Digital HERO 5 Wrist Camera.

What-s Included:

-1 Roll Bar/Tube Clamp

-1 Three-way Adjustable Pivot Arm (three piece assembly)

-Warranty: One Year

Gopro Hd Cameras Rechargeable Battery

Gopro Hd Cameras Rechargeable Battery. Use this lithium-ion rechargeable battery as a spare or a replacement in your HD HERO camera.

Provides approx. 2.5hrs of record.


NOTE: This battery is for use in HD HERO cameras only.

Whats Included:

-1 Rechargeable Lithium-Ion Battery

Output: 3.7V

Capacity: 1100mAh

Dimensions: 1.75" x 1.38" x .31"/4.45cm x 3.49cm x .79cm (H x W x D)

Gopro Vented Helmet Strap

Gopro Vented Helmet Strap. Vented helmet strap for your quick-release HERO camera.

One size fits all adjustability.


Compatible with all GoPro quick-release cameras including the Helmet HERO Wide, Motorsports HERO Wide, Motorsports HERO, Surf HERO, and WIDE HERO cameras.

NOT compatible with the Digital HERO 5 Wrist Camera.


Whats Included:

-1 Adjustable Strap for Vented Helmets


Construction: polycarbonate

Strap: nylon