Mangrove Mvhs-nx70 Sony

Mangrove Mvhs-nx70 Sony. HOUSING OVERVIEW:Mangrove video housing’s front case is constructed from marine grade aluminium, machined, anodized and the rear case is machined from solid Delrin. The housing’s sleek, ergonomic design feels like a natural extension of your hands and makes capturing that perfect video sequence fluid and easy. Redundant double O-ring seal system on the rear case provides maximum protection and does not depend on clamping pressure for security.The Mangrove MVH is a universal housing that accepts nearly the entire line of Sony HD video cameras and the design benefits of terchangeable optics like the wide angle port WP-80, the camcorder mounts on a specially engineered universal camera tray that can be adjusted by thestomer in any position in just a few minutes. The available length for the camera and its battery is 215 mm/8.5 inches. Its solid build quality and elegant ergonomics make shooting underwater video a pleasure. Whether your serious about getting into video or a pro already, this housing is designed to make the experience rewarding! It is depth-rated to 200m/660 feet, making it the deepest-operating video housing on the market.SUPPORTED CAMERA MODELS:- Sony HXR: NX70 Features:CONTROL SYSTEM:The Mangrove MVH is a full electronically controlled housing that uses the AV/R-10pin connector The external controls on the housing are linked by 12 electromagnetic pushbuttons to corresponding controls on the camera inside the case, eliminating the need for the physical shafts that pierce the walls of mechanical housings. The electromagnetic controls do not penetrate the housing wall and can be easily removed for cleaning and maintenance. With non-penetrating electronic controls there is virtually no risk of the housing leaks typical with mechanical through-hole designs.Another convenient feature of this type of system is that the controls for the housing are grouped together in three locations, to the left, right and under the in-built monitor So that each function can be operated by your thumbs while maintaining a steady grip on the handles. In this position you can instantly see the labels for the names of each control, as compare to a mechanical housing where you must either memorize the location of the controls or rotate the housing to read the name of the control you want to operate. Grouped electronic controls are very convenient on deep dives where nitrogen narcosis may be a factor.MONITOR:Rather than viewing the underwater world through a small viewfinder, the housing incorporates a High–Resolution TFT LCD monitor built into the back of the case that gives you a large 3.5” image; you see what the camera is recording, in full colour, while holding the housing at arm’s length. Not only will the larger image be of great assistance in composing your shots, you can instantly see the results when you change manual focus, turn on lights, or use your filter, you will also see all the status information normally displayed in your camera’s een/viewfinder. An optional AUO 3.5" 16:9 ultra-high resolution monitor can be installed instead of the standard TFT-LCD monitor, the resolution of this new AUO LCD is 2400(W) x 480(H), which is 5.5 times higher than the standard TFT-LCD, and the brightness is 500 cd/m2, twice the TFT monitor.The in-built monitor has a hood that eliminates glare and reflections from your surroundings, which also allows viewing even in strong ambient light; furthermore the LCD screen is 25 degrees angled for enhanced viewing at arm’s length. The monitor is powered by their own Lithium batteries so they do not rob any power from the camera’s battery.The rearward placement of the handles is also a boon for those who suffer from Hyperopia and Presbyopia. Rear monitor housings can be difficult for bad eyesight sufferers and often you can see many people shooting with arms straight out to be able to focus. A few inches do make a difference for many and the handle position allows all but the most farsighted divers to comfortably maintain relaxed arms for steady shooting.A live video feed to the surface is also available, you can use your Mangrove external monitor or any standard monitor with a 100 m (333 feet) extension cable and have a perfect view of the diver assisted or tripod mounted Mangrove housing from the boat.AUDIBLE & VISUAL LEAK DETECTOR:As with all our housings, the MVH is offered as standard equipment with a leak detector that will immediately activate a loud buzzer and a LED located at the rear of the housing in the event water should find its way past the o-ring seals, the water detector is located next to O-ring sealing and at the lowest point (in usual operating position) of the caseINTERCHANGEABLE PORT SYSTEM:Full HD cameras demand the finest optics - the flaws of poor quality lenses will show up when watched on big HD TV screens or projected. Changes to the way land lenses see when taken under the water can compromise your underwater videography. To ensure users of Mangrove video housings obtain the best quality footage, Aditech have teamed up with Fathom Imaging. Fathom Imaging are a specialist manufacturer of lenses that have been specifically developed for use under the water. Fathom Imagings specialised water contact optics are routinely used on top of the line broadcast systems costing tens of thousands of pounds.Aditech offer a range of Fathom Imaging underwater video camera lenses to meet your exact requirements. You can shoot the smallest critters to hulking shipwrecks. Some of the Fathom Imaging lenses allow some or full zoom through, letting you switch from super wide- angle to a narrower angle. This lity is ideal for working with sharks as you can video the entire shark and its backdrop, then zoom in for a head shot without losing focus. As always, its vital to think carefully about the subjects you will want to portray in your underwater videos and the likely filming conditions before selecting the right lens to match your needs.The Mangrove housing MVHS-L comes with a 56mm threaded port ring that accepts the following flat and wide angle ports:FP-M56-WA: flat port with M56 threaded port ring, included W-FPM56 wrench that allows easily mounting the lens. This port is compatible with the ring adapter AR-M67 as well as the wide angle conversion dome WP-65-M79. Due to refraction flat ports reduce the angle-of-coverage of a lens and at the same time enlarge the image. Minimum focusing distance and zoom range depend upon your camcorder. This port accepts M67 wet macro lens only in combination with the adapter AR-M67.WP-65-M79: the new WP-65-M79 Wide Angle Conversion Dome compatible with the flat port FP-M56-WA provides all of the benefits of a dome port underwater without the limitations. The conversion dome corrects for the refractive magnification of the flat port underwater to restore the cameras original angle of coverage. It increases the underwater field of view of your camcorders lens allowing to recover 105% of the FOV (field or view) of your camcorder on land. This is a semi - wide angle. You can use around half your zoom range.WP-90: it’s a wide angle port designed by Fathom Imaging is constructed of an aluminium shell and coated BK-7 glass elements to provide the sharpest, clearest underwater images possible. The WP-90 covers a range of 87º underwater and 90º on land. It is nitrogen-purged / vacuum-sealed. The front dome element has a hard coating and is protected by a shade. This remarkable 90 degree optic is designed to work with the latest wide angle Sony and Panasonic camcorders and supports full zoom through (only underwater).COLOUR CORRECTION FILTERS:Several removable external filters are available; CF-80, CF-150, CF-M67. These optional colour filters reduces the blue hues and revives the vivid colours instantly when used with available sunlight to 24 m (80´) depths. The CF-80 filter attaches directly to the flat port FP-M56-WA, and the CF-150 attaches to the wide angle port WP-90.VIDEO LIGHTING SYSTEMS:Once you descend beyond the effective range of your correction filter, or if you are diving at night, in a cavern, or on a particularly ast day, you are going to need some type of supplementary lighting system to provide colour, contrast, and excitement to your videos. Fortunately Mangrove’s Video Lighting Systems combine remarkably even lighting coverage with a compact design that attaches easily and maintains exceptionally balance of the housing. The VC-2L6 and VC-4L6 are lightweight compact halogen lights that can be used for video as well as a modelling light to aid with auto focus on your underwater still camera. The VS and MVS series are video lights engineered to equalized weight and maximize balance, the light heads and batteries are separate units, because the battery module is mounted beneath the housing, the light head is small, lightweight, and easy to position. All lighting systems are powered by Lithium Ion battery packs, also included is the smart charger for worldwide use. HOUSING CONTROL SET:- Power ON/OFF- Record/Standby- Photo record- Photo prepare- Zoom Tele- Zoom Wide- Photo (direct to Hard Drive or Memory Stick)- Image Mode Change (Camera/Photo) - Joystick Up- Joystick Down- Joystick Right- Joystick Left- Menu Enter- Electronic-One-Touch White Balance - Guide Frame Technical Specifications:- Dimensions (D x L): 160 x 320 mm- Weight: 4150g- Buoyancy: Engineered to be +/- neutrally buoyant with camera, WP-80 and lighting system VC-4 mounted- Housing materials: Anodized marine grade aluminium and machined Delrin- Hardware: 316 Stainless Steel throughout- Locking system: (2) tension latch with secondary lockSeals: Housing Back: double O-ring Seals; one 4mm radial bore seal, one 3mm face seal Front Port: double 2.5 mm O-ring Seals; one radial bore seal, one face seal- Grip handles: 2 detachable ergonomic handles with bracket shoe for lighting system- Finish: Clear anodize aluminium and black Delrin- Control System: through the 3.5mm LANC remote jack or 10-pin AV/Remote- Type of controls: 12 non-penetrating electro-magnetic pushbuttons- Leak detector: Audible & Visual water alarm- Status information: Two LEDs, green when camcorder is connected, red when camcorder is recording.- White balance status: Two LEDs, yellow and green show the white balance selection (only for type I control system)- Rear monitor: 3,5” colour TFT LCD or 3.5” AUO, 25º angled, monitor hood included- Screen resolution: 900 (W) x 234 (H)- Video system: PAL or NTSC (auto-detect)- Monitor life time: 10.000 hours- Monitor brightness: 250 Cd/m2- Monitor power source: Lithium-Ion battery pack 1280 mAh (supplied with the housing)- Monitor run time: Approx. 9 hours- Depth rating: Each unit is pressure tested to 200 meters / 660 feet

Mangrove Mvus-l Sony

Mangrove Mvus-l Sony. Mangrove video housing’s front case is constructed from marine grade aluminium, machined, anodized and the rear case is machined from solid Delrin. The housing’s sleek, ergonomic design feels like a natural extension of your hands and makes capturing that perfect video sequence fluid and easy. Redundant double O-ring seal system on the rear case provides maximum protection and does not depend on clamping pressure for security. The Mangrove MVU is a universal housing that accepts nearly the entire line of Sony HD video cameras, the MVU comes with a 117mm optical flat port prepared for the attachment of colour correction filters as well as wet wide angle converters, the camcorder mounts on a specially engineered universal camera tray that can be adjusted by the customer in any position in just a few minutes.The available length for the camera and its battery is 164mm/6.46 inches. Its solid build quality and elegant ergonomics make shooting underwater video a pleasure. Whether your serious about getting into video or a pro already, this housing is designed to make the experience rewarding! It is depth-rated to 200m/660 feet, making it the deepest-operating video housing on the market.SUPPORTED CAMERA MODELS: Housing with control system type I (LANC):- Sony HDR: CX6, CX7, CX11, CX105, CX106, CX115, CX116, CX155- Sony HDR: XR105, XR155- Sony HDR: HC3, HC5, HC7, HC9- Sony HDR: SR5, SR7, SR8, SR10, SR11, SR12- Sony HDR: UX3, UX7Housing with control system type II (LANC):- Sony HDR: XR200, XR350, XR500, XR520, XR550- Sony HDR: CX300, CX305, CX350, CX370, CX505, CX520, CX550- Sony HXR: MC50Housing with control system type III (Infrared):- Sony HDR: CX360, CX560, CX690, CX700- Sony HDR: PJ10, PJ30, PJ50Housing with control system type IV (LANC):- Sony HDR: CX570E, CX580V, CX730E, CX740VE, CX760V- Sony HDR: CX400, CX410, CX430, CX260VE, PJ260VE, XR260VE- Sony HDR: PJ580, PJ710V, PJ740, PJ760V- Sony HDR: PJ780VE, PJ790V, PJ650VE/V, PJ430, PJ420VE, PJ410VE- Sony HDR: PJ810E, PJ810/B- Sony HXR: NX30Features:CONTROL SYSTEM:The Mangrove MVH is a full electronically controlled housing that uses the AV/R-10pin connector, the external controls on the housing are linked by 12 electromagnetic pushbuttons to corresponding controls on the camera inside the case, eliminating the need for the physical shafts that pierce the walls of mechanical housings. The electromagnetic controls do not penetrate the housing wall and can be easily removed for cleaning and maintenance. With non-penetrating electronic controls there is virtually no risk of the housing leaks typical with mechanical through-hole designs. Another convenient feature of this type of system is that the controls for the housing are grouped together in three locations, to the left, right and under the in-built monitor, so that each function can be operated by your thumbs while maintaining a steady grip on the handles. In this position you can instantly see the labels for the names of each control, as compare to a mechanical housing where you must either memorize the location of the controls or rotate the housing to read the name of the control you want to operate. Grouped electronic controls are very convenient on deep dives where nitrogen narcosis may be a factor. MONITOR:Rather than viewing the underwater world through a small viewfinder, the housing incorporates a High–Resolution TFT LCD monitor built into the back of the case that gives you a large 3.5” image; you see what the camera is recording, in full colour, while holding the housing at arm’s length. Not only will the larger image be of great assistance in composing your shots, you can instantly see the results when you change manual focus, turn on lights, or use your filter, you will also see all the status information normally displayed in your camera’sreen/viewfinder. An optional AUO 3.5" 16:9 ultra high resolution monitor can be installed instead of the standard TFT-LCD monitor, the resolution of this new AUO LCD is 2400(W) x 480(H), which is 5.5 times higher than the standard TFT-LCD, and the brightness is 500 cd/m2, twice the TFTmonitor.The in-built monitor has a hood that eliminates glare and reflections from your surrounding, which also allows viewing even in strong ambient light; furthermore the LCD screen is 25 degrees angled for enhanced viewing at arm’s length. The monitor is powered by their own Lithium batteries so they do not rob any power from the camera’s battery.The rearward placement of the handles is also a boon for those who suffer from Hyperopia and Presbyopia. Rear monitor housings can be difficult for bad eyesight sufferers and often you can see many people shooting with arms straight out to be able to focus. A few inches does make a difference for many and the handle position allows all but the most farsighted divers to comfortably maintain relaxed arms for steady shooting.A live video feed to the surface is also available, you can use your Mangrove external monitor or any standard monitor with a 100 m (333 feet) extension cable and have a perfect view of the diver assisted or tripod mounted Mangrove housing from the boat. AUDIBLE & VISUAL LEAK DETECTOR:As with all our housings, it´s equipped with a leak detector that will immediately activate a loud buzzer and a LED located at the rear of the housing in the event water should find its way past the o-ring seals, the water detector is located next to O-ring sealing and at the lowest point (in usual operating position) of the case.WIDE ANGLE CONVERTERThe new WP-65-U2 Wide Angle Conversion Dome provides all of the benefits of a dome port underwater without the limitations. The conversion dome corrects for the refractive magnification of the flat port underwater to restore the cameras original angle of coverage. It increases the underwater field of view of your camcorders lens allowing to recover 105% of the FOV (field or view) of your camcorder on land. This is a semi - wide angle. You can use around half your zoom range. This lens is suited to filming subjects as large as medium sized sharks in good visibility.The front dome element has a hard coating and is protected by a shade, it is compatible with all Mangrove MVU universal housings. The WP-65-U2 port is an economical wonder for large subjects and great compositional expansion The wide angle conversion lens will definitely enhance your videos, whether the subject matter is a broad view of a general area or your aim is to get up close and personal with larger subjects. Our lens system allows for partial zoom through capability of your camera. Distortion is virtually minimal with spectacular image quality attained.COLOUR CORRECTION FILTERS:The correction filters CF-150 and CF-150-M fit over the housings port and can be installed and removed during the course of the dive, these filters can serve as an attractive alternative to artificial light sources in shallow depths.The red filter CF-150 is used to restore the red color absorbed by the water, it has been created specifically to correct colors in Caribean or tropical blue-green (cyan) water. This filter "neutralizes" the underwater blue colors so that the true colors which already exist can be recorded on film or video. The Magenta Filter CF-150-M is used to restore the red color absorbed by the greenVIDEO LIGHTING SYSTEMS:Once you descend beyond the effective range of your correction filter, or if you are diving at night, in a cavern, or on a particularly overcast day, you are going to need some type of supplementary lighting system to provide colour, contrast, and excitement to your videos.Fortunately Mangrove’s Video Lighting Systems combine remarkably even lighting coverage with a compact design that attaches easily and maintains exceptionally balance of the housing.The VC-2L6 and VC-4L6 are lightweight compact halogen lights that can be used for video as well as a modelling light to aid with auto focus on your underwater still camera. The VS and MVS series are video lights engineered to equalized weight and maximize balance, the light heads and batteries are separate units, because the battery module is mounted beneath the housing, the light head is small, lightweight, and easy to position. All lighting systems are powered by Lithium Ion battery packs, also included is the smart charger for worldwide use. HOUSING CONTROL SET (Type I):- Power ON/OFF- Record/Standby- Zoom Tele- Zoom Wide- Photo (direct to Hard Drive/Tape or Memory Stick)- Image Mode Change (Camera/Photo) - Backlight- Toggle between Manual to Auto Focus - Manual Focus Far- Manual Focu Near- Momentary Auto-focus (Focus Lock/Auto)- Variable Zoom Speed +/-- Electronic-One-Touch White Balance - Automatic/Indoor/Outdoor White Balance mode HOUSING CONTROL SET (Type II):- Power ON/OFF- Record/Standby- Photo record- Photo prepare- Zoom Tele- Zoom Wide- Photo (direct to Hard Drive or Memory Stick)- Image Mode Change (Camera/Photo) - Joystick Up- Joystick Down- Joystick Right- Joystick Left- Menu Enter- Momentary Auto-focus (Focus Lock/Auto)- Electronic-One-Touch White Balance - Guide FrameHOUSING CONTROL SET (Type III):- Power ON/OFF- Record/Standby- Photo record- Zoom Tele- Zoom Wide- Joystick Up- Joystick Down- Joystick Right- Joystick Left- Menu Enter- Electronic-One-Touch White BalanceHOUSING CONTROL SET (Type IV):- Power ON/OFF- Record/Standby- Photo record- Photo prepare- Zoom Tele- Zoom Wide- Navigation Joystick Up- Navigation Joystick Down- Navigation Joystick Right- Navigation Joystick Left- Menu Enter- Electronic-One-Touch White Balance- Toggle between Photo & Video mode- Toggle between Manual & Auto Focus - Manual Focus Far- Manual Focus Near- Guide FrameTechnical Specifications:- Dimensions (D x L): 160 x 275 mm- Weight: 3787g- Buoyancy: Engineered to be +/- neutrally buoyant with camera, WP-80 and lighting system VC-4 mounted- Housing materials: Anodized marine grade aluminium and machined Delrin- Hardware: 316 Stainless Steel throughout- Locking system: (2) tension latch with secondary lockSeals: Housing Back: double O-ring Seals; one 4mm radial bore seal, one 3mm face seal Front Port: double 2.5 mm O-ring Seals; one radial bore seal, one face seal- Grip handles: 2 detachable ergonomic handles with bracket shoe for lighting system- Finish: Clear anodize aluminium and black Delrin- Control System: through the 3.5mm LANC remote jack or 10-pin AV/Remote- Type of controls: 12 non-penetrating electro-magnetic pushbuttons- Leak detector: Audible & Visual water alarm- Status information: Two LEDs, green when camcorder is connected - Red when camcorder is recording.- White balance status: Two LEDs, yellow and green show the white balance selection (only for type I control system)- Rear monitor: 3,5” colour TFT LCD or 3.5” AUO, 25º angled, monitor hood included- Screen resolution: 960 (W) x 240 (H)- Video system: PAL or NTSC (auto-detect)- Monitor life time: 10.000 hours- Monitor brightness: 300 Cd/m2- Monitor power source: Lithium-Ion battery pack 1280 mAh (supplied with the housing)- Monitor run time: Approx. 9 hours- Depth rating: Each unit is pressure tested to 200 meters / 660 feet

Mangrove Mvhs-l Sony

Mangrove Mvhs-l Sony. The universal housing adapts to nearly the entire line of Sony HDR camcorders no longer than 154mm, the camera mounts on a specially engineered universal camera tray that can be adjusted in a few minutes by the customer. It´s built of a corrosion-resistant aluminium front case and the rear case machined from solid Delrin. It uses 10pin connector and 12 non-penetrating electromagnetic controls. The housing features a 3.5" LCD monitor back and comes with a 56mm threaded open port ring that accepts several ports; the wide angle port WP-90 and the flat port FP-M56 that allows the mounting of any 67mm threaded lens. Max depth 200m/660 feet.

Sea And Sea Rdx-100d Housing For Canon

Sea And Sea Rdx-100d Housing For Canon. Features:Two Fiber-optic cable sockets. By inserting the Fiber-optic Cable into the housing connector, an external strobe will be optically connected to the camera’s built-in flash enabling full-featured strobe photography and creative lighting expression.Features a Optical Viewfinder 0.5x that makes it easy to see the whole field of view. An optional exchangeable viewfinder can be selected as well.Various ports including NX ports can be mounted with the RDX Port Base L or the RDX Port Base S in order to accommodate many kinds of lenses.Easily operated shutter lever, excellent for quick snapshots. The shutter lever can be operated in two ways – pushing from the top or pulling from the front – and offers a smooth halfway press for adjusting the autofocus so you need not worry about any missed chances.Large buckle structure (with lock function). Makes it easier to open and close the back cover than existing (metal) locking latches.By attaching an SA8, a SEA ARM 7 Compact or a similar arm set to the tripod socket at the bottom of the housing, up to two external strobes can be mounted.When using the optional Grip-Stay L II, you can hold the camera firmly with both hands just as you can with conventional housings.Strong and durable build, with a depth rating of up to 60m / 200ft.Specifications[ RDX-100D Housing ][Construction] Polycarbonate[Depth rating] 60m / 200ft[Dimensions (WxHxD)] 200x190x140mm / 7.9x7.5x5.5 inches[Weight] Approx. 1,770g / 62oz (Housing only)