Oceanic Sp5 Din

Oceanic Sp5 Din.

Oceanic Cdx5 Din Env

Oceanic Cdx5 Din Env. The GT3 CDX5 is a high performance but very affordable regulator with an over-balanced diaphragm, environmentally sealed first stage and balanced second stage that incorporates our dynamically adjusting inhalation resistance valve.The CDX5 is a compact first stage that uses an over-balanced diaphragm design to deliver increasing performance as depth and gas density increase, ensuring a continuous level of high performance and flow rate regardless of depth or cylinder pressure. The CDX5 is environmentally sealed for extra cold water performance and reliability as well as contamination protection that might otherwise damage the internal parts. Four low pressure and two high pressure ports are equally distributed on either side of the first stage at optimised angles for ideal hose routing.The GT3 is a pneumatically balanced second stage with diver adjustable inhalation control but rather than have to manually fine tune the inhalation resistance during the dive the GT3 will dynamically adjust the valve to maintain the performance level that has been set. The GT3 is fitted with a braided hose pressure hose to reduve the overall weight and also improve the safety of the regulator. Braided hoses have a higher burst pressure and are much more resistant to UV and contamination damage compared to standard rubber hoses.On top of all these great features all UK purchases of the Oceanic GT3 CDX5 Regulator are protected by a Lifetime warranty once registered. To maintain the warranty the regulator must be serviced annually within a month of the purchase anniversary at an authorised Oceanic Dealer. To make the deal even sweeter we will even provide the service kit free of charge to the dealer, making it even cheaper to own and maintain your Oceanic regulators. For more information regarding the warranty programme please visit the Lifetime Warranty page.Features: - Over-balanced diaphragm first stage - Environmental seal - Four low pressure ports - Two high pressure ports - Braided low pressure hose - Pneumatically balanced second stage - Dynamic Inhalation AdjustmentAdditional Information: - First Stage Valve Type Balanced Diaphragm - Environmentally Sealed Yes - High Pressure Ports 2 - Low Pressure Ports 4 - Integrated Swivel No - Second Stage Valve Type Balanced - Weight including hose (DIN) 1000 - Nitrox CompatibilityStandard to 40%

Oceanic Cdx5 Yoke Env

Oceanic Cdx5 Yoke Env.

Oceanic Fdx10 Yoke With Dvt

Oceanic Fdx10 Yoke With Dvt.

Scubapro Mk25 First Stage

Scubapro Mk25 First Stage. SCUBAPRO is synonymous with piston-controlled first stages. Our MK25 underscores this heritage with an array of patented features and ultra-stable intermediate pressure, for an extremely punctual and consistent high delivery of air, ensuring unfailing performance.• The MK25 balanced piston first stage is our absolute top performer, making this system our very best!• Air balanced flow-through piston provides constant and effortless air flow unaffected by changing tank pressure.• Newly polished chrome edition with 5 low pressure and 2 high pressure ports plus swiveling turret for convenient arrangement and personalisation of your gear.• Anti-freeze protection for all diving temperatures and externally adjustable intermediate pressure for easy maintenance.• Available in either 232bar INT or 300bar DIN configuration.Air balanced flow-through piston- First stages with air balanced pistons deliver significantly more air to the second stage than any other first stage, while their performance is totally unaffected by the changing tank pressure. A balanced piston allows the use of lighter and more sensitive components, resulting in ultra fast breathing response, instant delivery of air on demand, and extra high air flow, especially in low tank pressure ranges. The tired diver benefits from a smoother breathing regulator during the ascent or deco stop. Balanced piston first stages are the first choice of demanding sport divers and professionals. A balanced piston performs equally in warm and cold water environments. Two opposite high pressure ports- The arrangement of high and low pressure hoses is crucial to diving comfort. Two opposite high pressure ports allow for an individual positioning of the first stage (pointing up or down). This allows the diver to position the gauges either on the right or left side and increases the freedom of movement for head and neck. Multiple low pressure ports- For ultimate freedom in the arrangement of low pressure hoses, the MK25 accommodates five HF (high flow) ports on a swiveling turret, which allows for 360 degree swivel of hoses. High flow ports deliver about 15% more air than conventional ports. DIN/INT first stage configurations- To ensure worldwide compatibility, all SCUBAPRO regulator systems are available in a 232bar INT version as well as 300bar DIN versions. Externally adjustable intermediate pressure- Allows authorized SCUBAPRO service technicians to quickly fine tune or make adjustments after maintenance without the need to disassemble the first stage. Chrome plated brass body- machined marine grade, for excellent resistance to corrosion and long lasting robustness. Cold Water Diving With SCUBAPRO- Diving conditions can be drastically different, including extreme cold water and ambient air temperatures, posing the possibility of a regulator "freezing". Therefore, resistance to freezing is imperative for the diver. All SCUBAPRO regulator systems are CE approved for 300bar cold water diving. Some models go even beyond this super stringent qualification and have successfully been tested in extreme cold diving conditions at less than 2°C. As a specific anti-freezing measure, SCUBAPRO engineers have designed special anti-freeze components and features for the MK25 first stages for optimal cold water diving. The ribs act as a radiator to increase the surface area of heat transfer from the water to warm up the internal parts that have been drastically cooled down by the gas pressure drop. For cold water diving, SCUBAPRO’s second stages feature precision molded carbon fiber and technopolymer valve housing and components. They even exceed the CE cold water norm. In addition, these components contribute to their lightweight features and corrosion resistance. Air balanced flow-through piston: yes Classic downstream piston : n/a Balanced diaphragm: n/a Chrome plated brass body: yes Full titanium body: no Anti-freeze protection: yes Dry chamber: n/a Nitrox compatible up to 100% oxygen concentration: no Low pressure (LP) ports: 5 High pressure (HP) ports: 2 Swivelling turret with LP ports: yes INT 232bar: yes DIN 232bar: no DIN 300bar: yes Dedicated Nitrox EN144-3 DIN 232bar: no Externally adjustable intermediate pressure: yes

Seacsub First Stage X-5 P / P-synchro Yoke

Seacsub First Stage X-5 P / P-synchro Yoke. Features:- First stage materials: shiny chrome-plated brass - Second stage materials: ultralight technopolymers - HP outlets: 1 - LP outlets: 4- First stage features: unbalanced piston - Second stage features: exhaust port with increased air passage for better air flow. - It is also possible to regulate the Venturi effect (Dive/Pre-Dive).- Hiflex hose for greater flexibility and reduced weight.- Improved second-stage case to optimize performance.- OWS rubber covers to guarantee the top-notch performance.

Seacsub First Stage X-10 Pro / X-10 Ice Din 300

Seacsub First Stage X-10 Pro / X-10 Ice Din 300. Features:- First stage materials: forged brass with shiny chrome finish - Second stage materials: ultralight technopolymers - HP outlets: 2 - LP outlets: 4 - 2 of which are inclined at 30° - First stage features: balanced and with membrane, total insulation from the outside, preoriented hose outlet, supplied with the special anti-ice kit. - Second stage features: Exhaust port with increase air passage for better air flow. It is also possible to regulate the Venturi effect (Dive/Pre-Dive)- Kit antifreeze.- Deflector with larger passage for better air flow.- OWS rubber covers to guarantee the top-notch performance.

Seacsub First Stage X-10 Pro / X-10 Ice Yoke

Seacsub First Stage X-10 Pro / X-10 Ice Yoke. Features:- First stage materials: forged brass with shiny chrome finish - Second stage materials: ultralight technopolymers - HP outlets: 2 - LP outlets: 4 - 2 of which are inclined at 30° - First stage features: balanced and with membrane, total insulation from the outside, preoriented hose outlet, supplied with the special anti-ice kit. - Second stage features: Exhaust port with increase air passage for better air flow. It is also possible to regulate the Venturi effect (Dive/Pre-Dive)- Kit antifreeze.- Deflector with larger passage for better air flow.- OWS rubber covers to guarantee the top-notch performance.