Beuchat Pack Vrt 80 Evolution Yoke + Vrt Octopus

Beuchat Pack Vrt 80 Evolution Yoke + Vrt Octopus.

Beuchat Pack Vrt 80 Evolution Yoke + Vrt Octopus Iceberg

Beuchat Pack Vrt 80 Evolution Yoke + Vrt Octopus Iceberg.

Beuchat Vx200 Iceberg

Beuchat Vx200 Iceberg. New top-end of the market Beuchat regulator integrating the latest innovations of first as well as second stages. The VX 200 has been optimized to give an incomparable breathing comfort.Its streamlined and compact design gives the VX200 a modern and state of the art look.On the technical side, many field tests were conducted for 300 bars application. The valve and the seat of the first stage were re-designed to get maximum efficiency. Beuchat selected specific materials and the valve and the geometry of the seat was modified. These specific changes were made to obtain optimal sealing under all conditions. These changes resulted in a superb functioning under high pressure as well as under low pressure conditions.The second stage VX 200 is equipped with a new expansion chamber. Re-designing resulted in an optimized stability of the Venturi effect under all circumstances and conditions.The VX 200 was field tested in extreme conditions (cold, strong current, fresh water lakes…).Features First stage VX 200• Balanced diaphragm 1st stage.• Integrated anti-freeze system (BEUCHAT patent).• 4 x 3/8 UNF’’ intermediate pressure ports.• 2 x 7/16 BSP" high pressure ports.• Optimal compact 1st stage.• Large bore "Super Flow" regulator hose to improve flow rate.• Yoke 230 bars or DIN 200/300 bars connexion.Second stage• Integrated anti-freeze system (patent).• New geometry of the expansion chamber for improved stability of the Venturi effect.• Diver adjustable VENTURI control by means of a lever.• Diver breathing resistance adjustment by means of lateral notched knob.• Larger exhaust valve for less exhalation effort.• Anatomic bubble deflector with interior channel to control the air flow and deflect bubbles away from the face.• Mouthpiece in hypo-allergenic silicone.

Cressi Ellipse Black Balanced Nr - Mc9 Sc Yoke

Cressi Ellipse Black Balanced Nr - Mc9 Sc Yoke. Pairing of balanced and adjustable 2nd stage Ellipse Balanced with the hyper-balanced 1st stage MC9- SC.Thanks to the performance and the highly technological content of both stages this regulator is placed at the very top of the Cressi range.The user can adjust both the inhalation effort and the Venturi effect (dive / pre-dive) at any time during the dive.The 1st stage MC9 - SC is identical to model MC9, but with a special Seal Chamber which completely isolates the diaphragm and spring from contact with water. Ideal for diving in waters that are rich in suspension and mineral salts, for archaeological work, for potholing and diving in cold waters.Technical Features:2nd stage Ellipse Balanced:- Many of the exclusive technical characteristics of Ellipse, covered by 4 international patents, have been transferred to this new second stage.- Ellipse Balanced has a slightly larger casing which is made from a sound absorbing material, and a new diaphragm that further improves the already very low inhalation effort of Ellipse.- The weight is very low (the lightest in the category).- The pneumatic balancing system of the piston allows for constant performance at any depth and with any air pressure in the tanks.- An easy grip knob allows for the instant adjustment of the inhalation effort, even when wearing gloves, thus regulating it as first regulator or as spare regulator depending on the preferences of the user and the required use.- The regulation system is protected by a double seal and is fully protected from contact with water, thus maintaining smooth rotation even over time.- A small lever, located in the upper part of the casing, acts as a flow deviator and allows the Venturi effect to be adjusted. - When placed in position (-) it functions as pre-dive, for getting into the water and the first stages of the dive, whilst when moved to (+) it allows the regulator to develop its maximum performance.- An internal heat exchanger optimises the performance of the regulator even in cold waters. - The special study of air flows inside the casing has meant that absolutely natural, smooth and very silent breathing has been obtained.- The standard release baffle can be directly replaced by the user for a larger model, which pushes the bubbles further way from the diver’s face.- The possibility of quickly removing the entire mechanical part from the casing significantly aids maintenance operations. Technical Characteristics of the 2nd stage Ellipse Balanced with 1st stage MC9-SC:- Average inhalation effort: 3 mbar.- Average exhalation effort: 8 mbar.- Average breathing labour: 0.75 J/l.- Quantity of air supplied: 2500 l/m (*).- Weight without hose 170 g.(*) Values measured in compliance with standard UNI EN 250. 1st stage MC9-SC:- Hyper-balanced Diaphragm 1st stage with highly technological content that places it at the top of the Cressi range. - Very light body covered by a protective elastomer shell.- Cylinder sheathed in an antifriction and anticorrosion material that guarantees perfect sliding of the piston and long maintenance intervals.- The nozzle, made from 316 stainless steel, can be easily replaced, thus ensuring perfect air-tightness, even after many years of use.- Advanced research on the passage of internal air and a special assistance chamber have enabled the drop of pressure upon inhalation to be kept to a minimum, thus guaranteeing high performance in any situation. - Hyper-balancing allows for an increase of the intermediate pressure at maximum depths and lowering of the pressure in the tank, offering higher performance during the delicate ascent phase and at maximum depths. MC9 SC diaphragm 1st stage - Technical Features:- Working pressure (INT connection): 0-232 bar.- Calibration pressure: 10 bar.- Calibration adjustment range: +/- 0.5 bar.- Air supply: 4500 l/min (*).- High pressure seats (HP): 2.- Low pressure seats (LP): 4.- Weight with INT connection: 650 g.(*)values measured at LP seat outlet with second stage connected and 150 bar pressure in the cylinders.

Dive Rite 5400 Regulator

Dive Rite 5400 Regulator. The Dive Rite Oxygen Decompression Regulator is a compact, lightweight option for a deco regulator. Assembled in a clean room using all oxygen compatible materials and lubricants, this shallow water deco regulator can be used with higher concentrations of oxygen without the need for additional preparation.An unbalanced piston DIN first stage gives ideal performance for a shallow water regulator. An OPV on the first stage provides an additional margin of safety in the event of a first stage failure. A single HP port is used for a 1" diameter button guage.The XT2 second stage is a pneumatically balanced second stage with Venturi assist to provide a consistent gas pressure delivery for smooth inhalation. User adjustability on the second stage lets the divers tune the inhalation setting to match personal preference. An orthodontic mouthpiece reduces jaw fatigue on longer deco obligations. A 40" green low pressure hose and green faceplate on the second stage come standard to indicate oxygen use.Note: The Oxygen Deco Regulator is ONLY intended for use as a deco regulator. Do not attempt to use for a stage bottle/travel regulator.Note: The Oxygen Deco Regulator is not intended for use deeper than 50 ft (15m) on appropriate gas mix.SPECIFICATIONS:First Stage:Unbalanced piston1" button guage SPG2 LP ports1 HP port140 psi IP3.5" x 1.25" (8.9cm x 3.2cm)12.4 oz (351.5 g)Standard DIN FittingSecond Stage:Pneumatically BalancedVenturi assist40" green LP hoseGreen faceplate8.8 ozTotal Weight: 1.64 lb (.75 kg)TIPS:Note: The Oxygen Deco Regulator is ONLY intended for use as a deco regulator. Do not attempt to use for a stage bottle/travel regulator.Note: The Oxygen Deco Regulator is not intended for use deeper than 50 ft (15m) on appropriate gas mix.

Dive Rite Xt Regulator Din

Dive Rite Xt Regulator Din. The XT Regulator welcomes a new generation of regulator performance at Dive Rite. An elite performer, the XTs advanced, patented design earns top marks from Mike Ward of Dive Lab. With work of breathing at less than 1.0 J/l, the XT performs right alongside premier regulators on the market today.Features:XT1 First Stage Regulator:- Balanced first stage provides consistent gas flow regardless of depth and tank pressure- Five low pressure ports and a swivel turret achieves optimal hose routing- HP ports are angled 90-degrees from the DIN/Yoke fitting which gives the perfect angle for hose routing- Environmentally sealed to protect against internal corrosion, contaminants and freeze- Available as DIN or YokeXT2 First Stage Regulator:- Pneumatically balanced design gives consistent gas pressure for easy inhalation- Venturi assist directs [continued]Specifications:- XT1 First Stage- XT2 Second Stage- 28-inch LP hose (Airflex hose is available as an optional upgrade)- Available as DIN (RG5300-DIN) or Yoke (RG5300-Yoke)

Hollis 210 H02 Oxygen Din 25 Maxflex

Hollis 210 H02 Oxygen Din 25 Maxflex. 210 Second Stage - H-02 First Stage: - Cleaned and assembled in a clean room environment with specially designed materials, halocarbon based lubricants and color-coded for easy identification - Comes standard with 300 BAR/4500 PSI DIN connection and 40” in. /101 cm regulator hose - The perfect option for this regulator is the Hollis Brass PSI or BAR pressure gauge with 6”in./15 cm HP Hose - This coupled with its outstanding reliability make it’s the only choice for technical divers - Do not attempt to use this product with enriched air until you have obtained training in Nitrox use with mixtures containing over 40% O2 by volume, from a nationally recognized training agency - Aluminum Ring optional

Hollis 500se / Dc7 Yoke Maxflex

Hollis 500se / Dc7 Yoke Maxflex.