Boutique slm
Bons plans
Accueil >> SEA AND SEA
21.50 EUR
Sea And Sea Sea Arm Vii Camera Base
Sea And Sea Sea Arm Vii Camera Base. Camera base: 40x70x135mm / 126g
13.75 EUR
7.27 EUR
7.27 EUR
9.73 EUR
7.49 EUR
7.49 EUR
324.15 EUR
Sea And Sea Ys-converter N
Sea And Sea Ys-converter N. This converter can be used to attach an external strobe to Nikon digital SLR camera housings and allows for TTL adjustment.This new type of converter lets you use simultaneously two different types of strobes with different discharge characteristics and flash tubes, simply by turning the strobe selector dial. You can also switch between TTL mode and manual mode* depending on the shooting situation. Moreover, you can check the images taken with TTL mode on the LCD monitor of the camera and use the TTL adjustment dial to easily make fine adjustments to the level of light emitted.*Switching to manual on the converter means activating the manual function on the connected YS Series strobe (depending on the strobe model).SPECIFICATIONS:[Construction] Main body: polycarbonate, Fixing knob: ABS resin, Mounting plate: corrosion-resistant aluminum alloy (alumite coating)[Controls] OFF / Manual / TTL adjustment dial (from +2 to -2 in 1/3 increments), Strobe selector dial (x 2)[Battery] CR2 lithium battery (included)[Strobe-side connector] x 2 (for Sync cord/N)[Depth rating] 60m / 200ft[Dimensions (WxHxD)] 68x90x103mm / 2.7x3.6x4.1inch[Weight] Approx. 400g / 12.3oz (including CR2 battery)[Compatible strobe] YS-110a, YS-250PRO
165.98 EUR
73.94 EUR
348.88 EUR
Sea And Sea Optical Ys Converter Ys/n1
Sea And Sea Optical Ys Converter Ys/n1. Optical YS Converter/N1 for MDX housingA compact unit that converts the cameras TTL signal to a light signal. The converter can be mounted on the cameras accessory shoe and can be connected to (a) SEA&SEA strobe(s) with Fiber-Optic Cable(s) (*). TTL and manual modes can be switched by pushing the mode switch on the housing.* SEA&SEAs Fiber-Optic Cable II must be used with an Optical YS Converter.
2323.75 EUR
Sea And Sea Mdx-d7100 Housing For Nikon
Sea And Sea Mdx-d7100 Housing For Nikon. Features:Equipped with two fiber-optic cable sockets. With the cameras built-in flash raised and fiber-optic cables fitted, external strobes can be triggered as ‘slave units’ by the built-in flash.Every detail of the housing is precision machined. The housing is protected by a highly corrosion resistant anodized coating. All edges have been polished carefully for perfection.Controls all the Nikon D7100 essential functions underwater.(Bracketing button, preview button and function button are not operable from the housing) .The multi selector (which is often used underwater) is the same design as the camera control and can be operated in the same way. AF areas and Focus points can be changed by depressing the selector. The multi selector control is located so that it is accessible with your hand on the grip.The cameras built-in flash can be activated and deactivated from the housing. (When the accessory light-shielding plate is fixed, this function cannot be used).Equipped with Accessory Port which can be used for HDMI output.The grip design has been significantly improved with the travelling diver in mind. The grips are mounted with threadless fixings to facilitate easy transportation, mounting and removal of the grips. The new design also alleviates corrosion build up around the fittings. All fixings are available as spare parts.Fitted with a tripod socket on the centre underside of the housing.Equipped with the Optical Viewfinder 0.5x as standard. Other (optional) interchangeable viewfinders can be used.The quick shoe makes the camera easy to install and remove from the housing.Built-in leak sensor immediately alerts you to water ingress.Depth rating of 100m / 330ft makes the housing ideal for tech diving.Specifications:[ MDX-D7100 Housing ][Construction] Body: corrosion-resistant aluminum alloy (machined) Grip: corrosion-resistant die-cast aluminum alloy[Depth rating] 100m / 330ft[Dimensions (WxHxD)] 341 x 192 x 136mm / 13.4 x 7.6 x 5.4 inches[Weight] Approx. 2,700g / 94.5oz.(Housing only)RELEVANT INFORMATION:* 1 The housing is not equipped with any strobe connector when shipped from the factory. Use Fiber-Optic Cable(s) when connecting external strobe(s). Optional Sync Cord 2-pin Connector is required if you wish to use a conventional sync cable.
979.49 EUR
Sea And Sea Rdx-100d Housing For Canon
Sea And Sea Rdx-100d Housing For Canon. Features:Two Fiber-optic cable sockets. By inserting the Fiber-optic Cable into the housing connector, an external strobe will be optically connected to the camera’s built-in flash enabling full-featured strobe photography and creative lighting expression.Features a Optical Viewfinder 0.5x that makes it easy to see the whole field of view. An optional exchangeable viewfinder can be selected as well.Various ports including NX ports can be mounted with the RDX Port Base L or the RDX Port Base S in order to accommodate many kinds of lenses.Easily operated shutter lever, excellent for quick snapshots. The shutter lever can be operated in two ways – pushing from the top or pulling from the front – and offers a smooth halfway press for adjusting the autofocus so you need not worry about any missed chances.Large buckle structure (with lock function). Makes it easier to open and close the back cover than existing (metal) locking latches.By attaching an SA8, a SEA ARM 7 Compact or a similar arm set to the tripod socket at the bottom of the housing, up to two external strobes can be mounted.When using the optional Grip-Stay L II, you can hold the camera firmly with both hands just as you can with conventional housings.Strong and durable build, with a depth rating of up to 60m / 200ft.Specifications[ RDX-100D Housing ][Construction] Polycarbonate[Depth rating] 60m / 200ft[Dimensions (WxHxD)] 200x190x140mm / 7.9x7.5x5.5 inches[Weight] Approx. 1,770g / 62oz (Housing only)
288.77 EUR
Sea And Sea Dx Macro Port 50
Sea And Sea Dx Macro Port 50. Specifications:[Dimensions (DIAxD)] 117x81mm / 4.7x3.2inch[Weight] Approx. 370g / 13oz[Depth rating] 100m / 330ft[Construction] Corrosion-resistant alminum alloy (anodized) + Tempered glass (multi-coated)
136.13 EUR