Bare Velocity Full 7/6 Mm 2009

Bare Velocity Full 7/6 Mm 2009. - Progressive stretch 7 mm torso and 6mm arms/legs

- Lumbare-x-tender panel in low-back

- 3D anatomically correct shaping

- Contoured comfort collar and adjustable Glideseal neck

- Heavy-duty PK back zipper with internal gasket

- Mid-forearm and mid-calf internal flip seals

- Armor-Flex kneepads and ankle zippers

- Glued and blind stitched

Bare Elastek Full 7 Mm Mono

Bare Elastek Full 7 Mm Mono. A full-stretch suit with high-end features and design.

For those of you who are uncompromising in the quality desired in your dive gear.


- Skin-to-skin 3mm GLIDESEAL wrist and ankle seals


Material:

- 7mm ELASTEK neoprene


Innovation:

- Full-stretch


Other Features:

- Comfortable contoured 5mm GLIDESEAL collar with Velcro adjustment

- Heavy-duty, color coordinated, G-lock back zipper with stainless steel slider

- Skin-to-skin internal sealing zipper flap

- Anatomically correct pattern for three dimensional fit throughout

- Set-in sleeve design for superior comfort and mobility

- Embossed inner elbow flex panels

- FORMTEK kneepads provide total flexibility, durability and comfort

- Loop at base of zipper assists donning

- Double glued with SECURE-LOCK construction



HOOD NOT INCLUDED.

Beuchat Focea Comfort 2 7mm Hooded

Beuchat Focea Comfort 2 7mm Hooded. -Elaskin- (superflex) one piece suit - 7mm for use in cold water

- Max Heat : « Fireskin inside »

- Max Comfort : -Elaskin- pre-shaped wear

- Max Durability "Supratex - Resin ink"

- Modular concept for One Piece and Shorty suits.

- 7mm One Piece suit with an integrated hood

- Fully pre-shaped gear (Hoods, One Piece and Shorty suits)

- Movement made easier by the use of finer materials and adapted design in the "Flex System" areas.

- Oversized protective pads made of flexible "Supratex" material in the most exposed areas.

- Use of special resin ink to limit wear and tear at the shoulders, buttocks, and chest.

- Ultra-flexible "reversible" double sleeves at the Wrists and Ankles for ease in putting on and effective water-tightness.

- Bibbed -Elaskin- hood with a specific -Air Escape System- design allowing for residual air evacuation and for effortless decompression with the -Equalizing System-.

- Hood with seamless facial seal (no bothersome seam).

- Safety: Spotted day or night due to the Red or Orange luminescent ink on the top of the hood.

- Seamless joints (armpits, shoulders, knee and elbow interiors)

Camaro Seamless Hydronomic 7mm 2009

Camaro Seamless Hydronomic 7mm 2009. SEAMLESS 7 mm

5 mm Neoprene


Features:

- Seamless Bonding construction - no stitches double collar

- Double cuffs with zips on arms and legs

- Highly elastic X-TEND flex zones on the sides, knees and elbows

- G-lock zip system - 93.75 % waterproof

- Supratex - knee reinforcement

HOOD NOT INCLUDED

Cressi Facile Hf Ultraspan 7mm Mono

Cressi Facile Hf Ultraspan 7mm Mono. This is a new version of the Facile wetsuit, made entirely from 7 mm Ultraspan neoprene which is exceptionally supple and soft, lined with Helioflex, a material that has excellent thermal characteristics.

Facile HF is a wetsuit that has special features that limit water infiltrations as much as possible and therefore make it suitable for diving in tepid and cold waters.

It includes an all-in-one with incorporated hood and a sleeveless vest that can be purchased separately.

To limit the infiltration of water through the main zip (which stretches from the waist to the right cheek) the unique WSS (Water Stop System) has been used, this foresees a 3 mm neoprene bib, bonded to the inside of the suit at the main zip. The tiny amount of water that actually manages to penetrate the zip does not reach the diver-s body but collects between the internal surface of the all-in-one and this bib, which has its own zip that is not aligned with the main zip (making it easy to put on and take off).

Therefore, this all-in-one is warmer than any other similar wetsuit on the market.

The thickness is differentiated: 7 mm for the maximum protection in all the vital areas and 5 mm on the arms, calves, knees and hood, to increase freedom of movement.

The incorporated hood, which prevents those annoying infiltrations of water at the neck, has an Airfree valve to automatically release stale air.

The seals at the wrists and the ankles are double cuffed (3 mm outside + 2 mm single-lined inside). Therefore, gloves and boots are lodged, like in a neoprene -sandwich-, between the cuff and the main garment, guaranteeing a practically watertight seal.

In the event of particularly cold water, the special jacket in 5 mm double lined neoprene can be worn over the all-in-one.

This is sleeveless so that it does not inhibit movement. To avoid annoying overlaying of zips and possible infiltrations of water, the zip of the jacket has been positioned at the back.


Who it is for

The all-in-one is ideal for average water temperatures.

When worn with the jacket this is a very warm wetsuit and is suitable for the coldest waters as it offers, in the chest area, 15 mm of neoprene at the front and 12 mm at the back. Its remarkable thickness makes this wetsuit ideal even in very deep water where its thermal performance exceeds that of semi-dry suits.



Technical features

-This is a modular wetsuit that includes an all-in-one with incorporated hood and jacket, which can be purchased separately
-The all-in-one is made from 7 mm double lined Ultraspan neoprene, with inner lining in Helioflex
-Anatomical cut with pre-shaped arms and legs
-YKK front zip from waist to cheek with special WSS infiltration system
-Anti-wear reinforcements on the elbows and knees
-Wrists and ankles have zips and are made from double material (3 mm Ultraspan + cuff in 2 mm Metallite)

Cressi Comfort Plus Ultraspan 7 Mm Mono

Cressi Comfort Plus Ultraspan 7 Mm Mono. This wetsuit is made from extremely supple Ultraspan neoprene which offers unique and exceptional freedom of movement.

Available in versions for both men and women, it is a modular wetsuit that is made up of a one-piece, a jacket and a hood, which can all be purchased separately.

The long sleeved one-piece is available in 5 mm and 7 mm versions with back zip.

Both versions have a strong YKK zip that has Aquastop under zip lining and an adjustable sealing system on the neck.

The seals at the wrists and ankles are made with the Aquastop system which uses seals in smooth 2 mm neoprene, covered in Metallite, while on the knees and shoulders there are anti-wear inserts in Strata.

The short-sleeved jacket, in 5 mm neoprene, has a zip fastener up to the face and an incorporated hood.

To limit the entrance of water it has a smooth neoprene seal along the outline of the face.

Who it is for

Comfort is a wetsuit that is particularly recommended thanks to its extraordinary comfort that is due not only to the Ultraspan material with which it is made, but also the Aquastop seals at the wrists and ankles which make it very easy to put on and take off.

The thermal protection that it offers adapts perfectly to a wide range of temperatures as the user can not only choose between the 5 mm and 7 mm versions, depending on the temperature of the water, but can also benefit from the practical modular nature of the two versions.


HOOD NOT INCLUDED

Mares Antartica 7 Mm Trilastic

Mares Antartica 7 Mm Trilastic. Complete cold water wetsuit combo

- DSS Double Seal System

- Trilastic neoprene mix

- Excellent heat retention


The Antartica consists of a 7mm, 5mm and 3mm thick monosuit, an integrated hood and a 5mm thick shorty (sold separately).

The two elements of this wetsuit can be used together or separately depending on the water temperature. Now upgraded with the new DSS.

The She Dives Version has an all-new cut and fit.