Boutique slm
Bons plans
Accueil >> SUITS > UNDERSUITS de plongée
Fourth Element Halo 3d Undersuit
Fourth Element Halo 3d Undersuit. Maximising thermal protection whilst minimising buoyancy, the HALO 3D has body mapped insulation, strategically placed to enhance protection when in horizontal trim. Designed for use underneath membrane and trilaminate suits, the HALO 3D is the perfect complement to our current range of drysuit thermal protection. In a layering combination with Xerotherm, HALO 3D is suitable for the harshest diving conditions on the planet.
Fourth Element Halo 3d Undersuit Woman
Fourth Element Halo 3d Undersuit Woman. Maximising thermal protection whilst minimising buoyancy, the HALO 3D has body mapped insulation, strategically placed to enhance protection when in horizontal trim. Designed for use underneath membrane and trilaminate suits, the HALO 3D is the perfect complement to our current range of drysuit thermal protection. In a layering combination with Xerotherm, HALO 3D is suitable for the harshest diving conditions on the planet.
Fourth Element Arctic One Piece
Fourth Element Arctic One Piece. The Arctics two layers of high insulation, low bulk fabric, ensure exceptional levels of thermal protection. Constructed with comfort and utility in mind, the minimalist design provides outstanding performance under closer fitting neoprene drysuits. In a layering system (see here), the Arctic is also suited for use underneath membrane and trilaminate suits.
Fourth Element Arctic Socks
Fourth Element Arctic Socks. ARCTIC: The Arctic drysuit undersuit is complemented by the Arctic socks, which completes the thermal protection system, offering low bulk thermal protection to the extremities. The two layer construction is warm and comfortable, and the inner liner can be pulled out from the outer liner to speed drying times.
Fourth Element Arctic Leggings
Fourth Element Arctic Leggings. Probably the Worlds best selling thermal undergarment is now available in a simple one piece option. Featuring the innovative two layer technology pioneered by fourth element, the One Piece Arctic provides a simple solution to the challenges of thermal protection.Backed by years of field testing by the Norwegian Navy, the British Antarctic Survey Dive Team, the French Marines and the Danish Navy, the Arctic was designed using high technology fabrics and has been tested in REAL diving conditions from the Arctic to the Antarctic.
Fourth Element Arctic Top
Fourth Element Arctic Top. The Arctic top is designed with a long body portion to ensure adequate overlap between the top and trousers. Thumb loops prevent the sleeves from riding up during donning. Remember to remove them and tuck them back underneath the wrist seals. Tuck the top into the waistband of the trousers before donning drysuit to prevent any separation during the dive.
Fourth Element Xerotherm Wrist Warmer Black
Fourth Element Xerotherm Wrist Warmer Black. The xerotherm wrist warmer is designed to be used with drygloves, and bridges the gap between a divers undersuit and dry glove liner. The wrist warmer sits below the drysuit seal, and allows air to equalise with the dryglove, preventing squeeze. In the case of a glove failure, the fabric is not too thick, meaning that water will not flood through the seal. The double layer of xerotherm fabric on the inside of the wrist provides enhanced protection for an area where blood flows close to the skin surface. Hands will therefore stay warmer for longer.
Fourth Element Xerotherm Vest
Fourth Element Xerotherm Vest. The Xerotherm is the ultimate base layer undersuit for drysuits. Made using Polartec Powerstretch which was originally developed for NASA, the Xerotherm traps a layer of air - a much better insulator than water - next to the skin, keeping the wearer drier and more comfortable. Features of the Xerotherm top include: flat seams for next-to-skin comfort and thumb loops to hold the sleeves in place during donning. These thumb loops should be removed from the thumb and pushed back under the wrist seals prior to diving.The Xerotherm vest provides enhanced thermal protection for the body core when layered underneath a Xerotherm top or other undersuit, without increasing bulk around the arms.Features of the leggings include: flat seams for next-to-skin comfort, uniquely designed secure foot pockets to ensure the leggings stay in place during a dive and a high waistband to prevent separation of the top and leggings during the dive.Xerotherm Socks provide excellent thermal protection and comfort. Constructed using flat locked stitching and single layer high wicking fleece fabric, they protect the extremities and complement the Xerotherm undersuit range. They are low bulk and can be worn under other thermal socks without making drysuit boots too tight or uncomfortable.The Xerotherm hat, which is warm even when wet, is ideal for pre and post dive thermal protection and complements the rest of the Xerotherm range.The Xerotherm wrist warmer is designed to be used with drygloves, and bridges the gap between a divers undersuit and dry glove liner. The wrist warmer sits below the drysuit seal, and allows air to equalise with the dryglove, preventing squeeze. In the case of a glove failure, the fabric is not too thick, meaning that water will not "flood" through the seal. The double layer of Xerotherm fabric on the inside of the wrist provides enhanced protection for an area where blood flows close to the skin surface. Hands will therefore stay warmer for longer.
Fourth Element Xerotherm Socks
Fourth Element Xerotherm Socks. XEROTHERM: Xerotherm Socks provide excellent thermal protection and comfort. Constructed using flat locked stitching and single layer high wicking fleece fabric, they protect the extremities and complement the Xerotherm undersuit range. They are low bulk and can be worn under other thermal socks without preventing making drysuit boots too tight or uncomfortable.
Fourth Element Xerotherm Leggings
Fourth Element Xerotherm Leggings. The Xerotherm is the ultimate base layer undersuit for drysuits. Made using Polartec Powerstretch which was originally developed for NASA, the Xerotherm traps a layer of air - a much better insulator than water - next to the skin, keeping the wearer drier and more comfortable. Features of the Xerotherm top include: flat seams for next-to-skin comfort and thumb loops to hold the sleeves in place during donning. These thumb loops should be removed from the thumb and pushed back under the wrist seals prior to diving.The Xerotherm vest provides enhanced thermal protection for the body core when layered underneath a Xerotherm top or other undersuit, without increasing bulk around the arms.Features of the leggings include: flat seams for next-to-skin comfort, uniquely designed secure foot pockets to ensure the leggings stay in place during a dive and a high waistband to prevent separation of the top and leggings during the dive.Xerotherm Socks provide excellent thermal protection and comfort. Constructed using flat locked stitching and single layer high wicking fleece fabric, they protect the extremities and complement the Xerotherm undersuit range. They are low bulk and can be worn under other thermal socks without making drysuit boots too tight or uncomfortable.The Xerotherm hat, which is warm even when wet, is ideal for pre and post dive thermal protection and complements the rest of the Xerotherm range.The Xerotherm wrist warmer is designed to be used with drygloves, and bridges the gap between a divers undersuit and dry glove liner. The wrist warmer sits below the drysuit seal, and allows air to equalise with the dryglove, preventing squeeze. In the case of a glove failure, the fabric is not too thick, meaning that water will not "flood" through the seal. The double layer of Xerotherm fabric on the inside of the wrist provides enhanced protection for an area where blood flows close to the skin surface. Hands will therefore stay warmer for longer.
Fourth Element Xerotherm Top
Fourth Element Xerotherm Top. The Xerotherm is the ultimate base layer for use under a drysuit. Made using Polartec Powerstretch which was originally developed for NASA, the Xerotherm traps a layer of air - a much better insulator than water - next to the skin, keeping the wearer drier and more comfortable.The unisex range is designed to be worn under another undersuit or on its own under a neoprene drysuit, it provides astonishing warmth without contributing to bulk or buoyancy.






































