Apeks Wtx-d30 Single Cylinder Wing

Apeks Wtx-d30 Single Cylinder Wing. Narrow wings specifically designed for a single tank use. Hydrodynamics and compact Optimum stabilityNot wrapped around the pad (Taco effect) unlike large wings. K style inflator with brass button and safety cable against hyperextension. Solid, durable materials and heavy duty equipment. Available 40lb/18l - 30lb/15l - 18lb/8l. drains by 2 large drainage eyelets Focusing drainage panel The donut wings 30 and 40 pounds can take an optional retractable kit Simplified Very compact Resistant to friction or abrasion. ShrinkMaterial: Exterior: 1000D Cordura ArmorshieldInner tube: 22k (.022) thick urethane black Zipper: YKK # 10 high quality plastic zipper Inflator:K style with brass buttons Oval HoseSafety wire to prevent hyperextension Set "OFF-CENTER" in order not to interfere with the regulator in the first stage Exhaust valve: Valve flat profile Located in the front, lower left

Apeks Wtx-d40 Wing

Apeks Wtx-d40 Wing. Single cylinder wings, often referred to as donuts, are oval shaped air cells or bladders that are not permanently attached to a harness. While single cylinder wings have their origins in the realm of technical diving, they are becoming very popular in the recreational community. Not only are these single cylinder wings streamlined, but due to their shape being a continuous loop, they are very stable underwater. There is no dramatic shift of air from left to right.Apeks single cylinder wings are a smart design that allows a cylinder to nest deep inside them. These wings mate up nicely to the rest of the Apeks WTX collection of high quality harnesses, plates and accessories. They can be configured in multiple ways to match the type of diving that you do. As with the rest of the WTX collection, these single cylinder wings are built from the finest quality materials. They are designed by Apeks and built in our own factory. Specifications: Inflator:- K style with brass buttons- Low profile 16” oval-shaped hose- Safety cable to prevent hyper-extension- Positioned off-center so as not to interfere with regulator 1st stage- Dump Valve- Low profile flat valve- Positioned in front, lower-left side - Tank Stabilizer Bars- Drains- 2 large drain grommets- Center mesh drain panel- The 30lb and 40lb wings are able to accept an optional Retractor Kit, P/N: 388300Materials:- Exterior: 1000D Armorshield Cordura- Inner air cell: 22mil (.022) thick black urethane- Zipper: heavy duty YKK #10 plastic zip and slide

Apeks Wtx-d18 Wing

Apeks Wtx-d18 Wing. Single cylinder wings, often referred to as donuts, are oval shaped air cells or bladders that are not permanently attached to a harness. While single cylinder wings have their origins in the realm of technical diving, they are becoming very popular in the recreational community. Not only are these single cylinder wings streamlined, but due to their shape being a continuous loop, they are very stable underwater. There is no dramatic shift of air from left to right.Apeks single cylinder wings are a smart design that allows a cylinder to nest deep inside them. These wings mate up nicely to the rest of the Apeks WTX collection of high quality harnesses, plates and accessories. They can be configured in multiple ways to match the type of diving that you do. As with the rest of the WTX collection, these single cylinder wings are built from the finest quality materials. They are designed by Apeks and built in our own factory. Specifications: Inflator:- K style with brass buttons- Low profile 16” oval-shaped hose- Safety cable to prevent hyper-extension- Positioned off-center so as not to interfere with regulator 1st stage- Dump Valve- Low profile flat valve- Positioned in front, lower-left side - Tank Stabilizer Bars- Drains- 2 large drain grommets- Center mesh drain panel- The 30lb and 40lb wings are able to accept an optional Retractor Kit, P/N: 388300Materials:- Exterior: 1000D Armorshield Cordura- Inner air cell: 22mil (.022) thick black urethane- Zipper: heavy duty YKK #10 plastic zip and slide

Aqualung Wing For Zuma Vest Grey

Aqualung Wing For Zuma Vest Grey. The fun, travel-friendly ZUMA will find favor with those divers who are tired of paying excess baggage fees. This ultra-light, weightintegrated, back inflation BC has everything you need, yet lacks weight and bulk.Once you lift it, you’ll feel for yourself that a size ML/LG weighs less than 2.2kg (4.75 lbs), with the airway and weight pockets included!Features:- Extremely lightweight to help eliminate those dreaded excess baggage fees. A size ML/LG weighs less than 2.2kg (4.75 lbs).- Great packability – flat or rolled. The ZUMA fits nicely, along with the rest of your dive kit into the Aqua Lung Departure carry-on bag- Innovative tank support system eliminates the need for a hard pack. The tank band has been lowered to integrate with the waistband. A valve strap pulls the top of the cylinder in towards your center of gravity. This relieves the shoulders and transfers the load to the hips. The bottom line is proper fit, comfort and stability. Be sure to try one on with a cylinder.- SureLock II Mechanical Weight Release System (patented) – provides a safe, single-pull release. Inserting weight is as simple as insert and “click”. With SureLock, your weights are secure in the BC. Once engaged, the only way to release the weight is to pull on the handle.- Only 4 sizes are all that’s needed to cover from XXS to XXL- A bladder retraction system is used to pull in the sides of the bladder during deflation. This keeps unit streamlined and reduces drag.- An adjustable chest strap can be raised or lowered on a rail system. Set it for your personal comfort- Proprietary flat valves mean are streamlined, eliminating drag- The fold-down, easy-access pocket is perfect for a small flashlight or a fish I.D. slate- Features 4 D-rings to attach all of your accessories.- Lower right pull dump is perfect for head first descents or cruising on a horizontal plane.- Sculpted padded shoulders for comfort- Padded spine and lumbar support for comfort and stability- Optional non-ditch weight pockets that mount on the tank band, p/n 427085, can be purchased separately.- Other options include the Airsource, Squeeze lock knife and reflector kit- Knife attachment points are found on the left lobe which will accommodate many of the Aqua Lung knives. This location provides easy access to the knife.- Right shoulder pull dump provides an additional dumping option.- Rolled neck collar prevents abrasion on the neckSpecifications:- Style Weight-integrated Back Inflation- InflatorPowerline- Dump valves Flat valves- HarnessWrapture- Weight System SureLock II- TankbandUniversal slotted tankband- Of D-rings 4 plastic- Pockets1 fold-down pocket- Knife attachmentYes- Rolled collar Yes- Ditchable weightAll sizes 20lb/9kg- Non-ditchable weight 10 lb/4.5kg w/ optional pockets

Dive Rite Voyager Exp Wing 16

Dive Rite Voyager Exp Wing 16. The Voyager series are outstanding wings for single-tank diving with their low-profile, donut-shape design. Streamlined side panels and a minimalist, oval shape create a higher-lift wing that remains unobtrusive instead of bulky. This is ideal for divers with larger statures or those who dive in cold water and/or require more weight. The Voyager accommodates up to one 95ft3/15 L tank with 35lbs/15.8 kg of lift.With its donut-shape, the Voyager wing provides greater stability and control in the water. Donut-style or 360 degree wings promote an even volume of inflation on top, sides and bottom, which improves buoyancy control and promotes a more efficient, horizontal trim.Divers may choose from our value-driven and durable 1680 ballistic nylon EXP material or our SuperFabric® brand technology XT material that we’ve married with a 1000 denier Cordura® inner shell to create an armor-clad outer bag thats impervious to damaging pinches and cuts. The Voyager EXP (Model BC 4700) is further enhanced with a heavy-duty, 210 denier nylon laminated bladder. They are backed by our WORRY-FREE LIFETIME GUARANTEE and are made exclusively in the U.S.A.As a part of our modular BCD system, it can be matched with either a TransPac® XT, Transplate or any metal backplate and webbing harness.Specs: Model BC4700 Voyager EXP outer bag is made of durable 1680 denier ballistic nylon that resists tears and abrasion. Urethane flanges are welded in place, which make it easy to switch out corrugated hoses and over pressurization valves without tools.Comes equipped with choice of 16-inch or 12-inch elbow or 16-inch rapid exhaust (pull dump) along with either 15-inch, 22-inch or 27-inch low-pressure inflation hose.Two sets of marine-grade 316 stainless steel grommet mounting holes are used to attach wing to harness and set diver trim.Approximate dimensions uninflated: 22-in H x 19-in W (55.8cm x 48.3cm)2lbs 8oz (1.3kg)

Hollis C45 Prism

Hollis C45 Prism.

Hollis C60 Lx Wing

Hollis C60 Lx Wing. We are proud to release the new LX wing range, developed and tested by technical divers and 3 years in the making.Quality and performance are the two most integral features of our products, which is why we have reintroduced the proven S series and C series wings with key improvements. New materials include a 1680D Cordura for the exterior bladder and 420 nylon for the internal bladder. The LX design also includes a 360 degree internal retraction system. This has been added to match the design of the wing, allowing for a streamlined rig at all times. We have also added a new oval corrugated hose, redesigned OPV and stainless grommets to replace the mesh on the bottom of the wing.Every new LX wing includes a lifetime warranty.FEATURES:-Models include the S25 LX, S38 LX, C45 LX and C60 LX.-Welded flange and one piece retainer for servicing without the need for tools.-Outer shell constructed of HD Laminated 1680D Cordura.-420 nylon internal bladder.-Centrally located elbow to avoid tank valve/regulator interference.-Lower left pull relief valve.-Cam band slots.-Lifetime Warranty.