Dive Rite Rebreather Wing Exp

Dive Rite Rebreather Wing Exp. Our CCR Series wing is designed for the O2ptima eCCR or any rebreather diver looking to streamline their hoses. The inflator hose is offset, lying just to the outside of the chest-mounted counterlungs. The open mid-section allows rebreather hoses to run through the middle of the wing, freeing up space behind the divers head and keeping airflow from being compressed at the top of the wing. This also means airflow is no longer restricted at the top of the wing due to hoses pressing down over the wing.

The CCR Series is an adjustable lift wing, sporting an optional Gusset Control System cord that can be used to further streamline the wing such as when carrying small bailout bottles . The GCS is not a bungee wing because it does not restrict air flow instead the GCS promotes added streamlining and buoyancy control, yet allows the wing to inflate to its full capacity.

Available in a single or dual bladder, the CCR Series offers 40 lbs/18.1 kg of lift and is designed for use with the TransPac, TransPlate or metal backplates.

Divers may choose from our value-driven and durable 1680 ballistic nylon EXP material or our SuperFabric® brand technology XT material that we-ve married with a 1000 denier Cordura® inner shell to create an armor-clad outer bag that is impervious to damaging pinches and cuts. Both the CCR EXP (Model BC 4800) and CCR XT (Model 5500) are further enhanced with a heavy-duty, 210 denier nylon laminated bladder. They are backed by our WORRY-FREE LIFETIME GUARANTEE and are made exclusively in the U.S.A.



FEATURES:

-Model BC4800 CCR EXP outer bag is made of durable 1680 denier ballistic nylon that resists tears and abrasion.

-Model BC5500 CCR XT outer bag is made of SuperFabric brand technology and 1000 denier Cordura® offering superior durability.Inner ladder is constructed from heavy-duty 210 denier nylon laminated bladder which is highly resistant to pinches and punctures.

-Urethane flanges are welded in place, which make it easy to switch out corrugated hoses and over pressurization valves without tools.

-Comes equipped with a 16-inch elbow inflator and along with a 27-inch low-pressure inflation hose. Other hoses lengths are available upon request.

-Two sets of marine-grade 316 stainless steel grommet mounting holes are used to attach wing to harness and set diver trim.

-Approximate dimensions uninflated: 22-in H x 21-in W (55.8cm x 53.3cm).

-3 lbs (1.4 kg).