Garmin Bail Mount Knobs For Vhf 100i & 200i

Garmin Bail Mount Knobs For Vhf 100i & 200i. Use these bail mount knobs with your VHF 100 or 200.Compatible Devices:VHF 100iVHF 200i

Garmin 12 Pin Extension Cable For Ghs10i

Garmin 12 Pin Extension Cable For Ghs10i. Give yourself a little room with this 10 m (32.8-foot) 12-pin extension cable.Compatible Devices:VHF 200VHF 300VHF 300 AIS

Garmin Power Cable For Vhf 100i & 200i

Garmin Power Cable For Vhf 100i & 200i. Power your compatible device with this 1.5 m power cable.Compatible Devices:VHF 100VHF 200

Garmin Vhf 300i Black

Garmin Vhf 300i Black. The Garmin VHF 300i marine receiver combines radio communication and 1 or 25 watts of transmit power with multi-station support to give you the flexibility and convenience you need to safely navigate and communicate on the open waters. The VHF 300i comes standard with a two-way hailer system and is also NMEA 0183 and NMEA 2000 compliant to offer greater onboard functionality.Communicate with ConfidenceThe VHF 300i is equipped with a two-way 30-watt hailer system for communication with other boats or deckhands. In addition, the VHF 300i has a patent-pending voicemail feature that lets you pre-record a 15-second message and deliver the message to any Digital Selective Calling radio. You’ll also have the ability to replay the last 90 seconds of any incoming voice transmission at the touch of a button.Take Full ControlThe VHF 300i is operated via the GHS 10i handset microphone that allows full radio control from a remote location. The GHS 10i features a crisp 2-inch LCD display, dedicated rotary key for frequent tasks, and three soft buttons for dynamic controls. The VHF 300 uses the supplied four-inch active speaker with volume knob, the built-in speaker on the GHS 10i or an optional third-party passive speaker.Save SpaceWith a space-saving black box configuration, you’ll be able to mount the VHF 300 wherever you choose. And with multi-station support, you can add the wired GHS 10i handset microphones throughout your vessel without having to add existing receivers. The system can also be used as an on-boat intercom if you have multiple stations aboard your vessel.Stay Safe on the SeasThe Garmin VHF 300i provides Class D Digital Selective Calling (DSC) capability via NMEA 0183 or NMEA 2000 connectivity. Should trouble arise, DSC provides distress calls with the push of a button. And if your boat is already interfaced with a compatible GPS chartplotter, you’ll get mayday signaling and a digital broadcast of your boat’s position. The VHF 300i also features Position Tracking, which allows a mariner to locate and keep tabs on up to three other boats in the area.Specifications: - Waterproof: yes (IPX7)- Temperature Range: from 14ºF to 122ºF (from -10ºC to 50ºC)- Compass-safe Distance:20 in. (500 mm)- Digital Selective Calling: Class D- Frequency Bands: All USA, Canadian, and international marine channels; 10 NOAA weather channels- Operating Voltage: from 10.8 to 15.6 Vdc (12 Vdc boat battery)- Current Drain: Transmit High Power: 6 A max; Transmit Low Power: 2 A max- Transmitter Power (at 13.6 Vdc): High Power: 25 W (23-25 W); Low Power: 1 W (.7-1 W)- Full-function Handset: Impedance: 4 Ω; Input Power: 4 W- External Speaker: Output Power: 4 W (4 Ω/max)Whats in the box:- VHF 300i- GHS 10i- Acitve speaker- Power cable- Deck cable (10 meters)- Mic hanger- Mounting hardware- DocumentationCompatible Devices:GPSMAP 4008GPSMAP 4010GPSMAP 4012GPSMAP 451GPSMAP 451sGPSMAP 5008GPSMAP 5012GPSMAP 5015GPSMAP 521GPSMAP 521sGPSMAP 551GPSMAP 551sGPSMAP 556GPSMAP 556sGPSMAP 6008GPSMAP 6012GPSMAP 7012GPSMAP 7015GPSMAP 720GPSMAP 750GPSMAP 8008 MFDGPSMAP 8012 MFDGPSMAP 8015 MFDGPSMAP 8500 Black BoxGPSMAP 8530 Black Box

Garmin Chrimp Thru-hull Mount Transducer 1 Kw 0 Tilt 40/75 Khz

Garmin Chrimp Thru-hull Mount Transducer 1 Kw 0 Tilt 40/75 Khz. Step up to 1 kW without a fairing with this flush-mounted bronze housing that protrudes less than 1/4" outside the hull and can sit on the trailer rollers/bunks without damage.The tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. And, low, medium and high frequency versions provide maximum flexibility for the choice of frequencies.An excellent choice for fiberglass and wood hulls, this 8-pin transducer has a depth of 3,000 ft; an operating frequency of 40-60 kHz; a beamwidth of 16-25 degrees; and a 0 to 7 degree deadrise.Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.Compatible Devices:GPSMAP 1020xsGPSMAP 1040xsGPSMAP 527xsGPSMAP 547xsGPSMAP 721xsGPSMAP 741xsGPSMAP 820xsGPSMAP 840xsGSD 26 CHIRP Professional Sonar Module

Garmin Chrimp Thru-hull Mount Transducer 1 Kw 0 Tilt 80/130 Khz

Garmin Chrimp Thru-hull Mount Transducer 1 Kw 0 Tilt 80/130 Khz. Step up to 1 kW without a fairing with this flush-mounted bronze housing that protrudes less than 1/4" outside the hull and can sit on the trailer rollers/bunks without damage.The tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. And, low, medium and high frequency versions provide maximum flexibility for the choice of frequencies.An excellent choice for fiberglass and wood hulls, this 8-pin transducer has a depth of 3,000 ft; an operating frequency of 85-135 kHz; a beamwidth of 11-16 degrees; and a 0 to 7 degree deadrise.Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.Compatible Devices:GPSMAP 1020xsGPSMAP 1040xsGPSMAP 527xsGPSMAP 547xsGPSMAP 721xsGPSMAP 741xsGPSMAP 820xsGPSMAP 840xsGSD 26 CHIRP Professional Sonar Module

Garmin Chrimp Thru-hull Mount Transducer 500 W 12 Tilt 40/75 Khz

Garmin Chrimp Thru-hull Mount Transducer 500 W 12 Tilt 40/75 Khz. Our bronze thru-hull mount transducer is designed to allow both traditional and spread spectrum scanning when used with a compatible sonar.A 300 W transducer with 8 pins, it has a depth of 800 ft; an operating frequency of 40-75 kHz; a beamwidth of 32/21 degrees; and a 8 to 24 degree deadrise.Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.Compatible Devices:GPSMAP 1020xsGPSMAP 1040xsGPSMAP 527xsGPSMAP 547xsGPSMAP 721xsGPSMAP 741xsGPSMAP 820xsGPSMAP 840xsGSD 26 CHIRP Professional Sonar Module

Garmin Chrimp Thru-hull Mount Transducer 500 W 20 Tilt 80/130 Khz

Garmin Chrimp Thru-hull Mount Transducer 500 W 20 Tilt 80/130 Khz. Our bronze thru-hull mount transducer is designed to allow both traditional and spread spectrum scanning when used with a compatible sonar like the GSD 26.A 600 W transducer with 8 pins, it has a depth of 800 ft; an operating frequency of 80-130 kHz; a beamwidth of 24/16 degrees; and a 16 to 24 degree deadrise.Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.Compatible Devices:GPSMAP 1020xsGPSMAP 527xsGPSMAP 557xsGPSMAP 721xsGPSMAP 751xsGPSMAP 820xsGSD 26 CHIRP Professional Sonar Module