Garmin Nmea 2000 Field Installable Connector

Garmin Nmea 2000 Field Installable Connector. Use our male or female NMEA 2000 field-installable connectors to create custom-length drop cables and backbone extension cables. These connectors (sold separately) also can be used to shorten any NMEA 2000 drop/backbone cable.

Garmin Check Valve Kit

Garmin Check Valve Kit. Add hydraulic isolation protection to your autopilot pump and steering systems with this check valve kit. This kit improves hydraulic pump efficiency and rudder control while increasing the autopilot pump service life.

Garmin Protective Cover For Gmi 10

Garmin Protective Cover For Gmi 10. Use our protective cover to protect your head device from the harsh marine environment when not in use.

Garmin Gra 10

Garmin Gra 10. With the GRA 10 Rudder Angle Analog Adapter aboard your vessel, you can give new life to your old gauges by making the transition from analog to digital. This simple-to-install adapter takes the data generated by traditional analog gauges and converts the data into a NMEA 2000 signal so you can create or expand your network without replacing all of the equipment on your boat.Connect to Your NetworkWith the Garmin GRA 10 adapter, you can convert analog information provided via the rudder-angle sensor (not included) on your boat to your NMEA 2000 network. The GRA 10 allows you to observe rudder-angle information on compatible Garmin display devices connected to your NMEA 2000 network.Upgrade With EaseThe NMEA 2000 analog adapters from Garmin are easy to add to any existing marine network. Once installed, the data from the adapters can be viewed via the GMI 10 Marine Instrument Display and other compatible Garmin devices. This easy-to-use set-up will help you bring your older dashboard into the digital age.Specifications: - Total cable length: 16 ft. (4.9 m)- Temperature range: From 5°F to 158°F (from -15°C to 70°C)- Compass Safe Distance: 2 in. (5 cm)- Power Input Source: 9–16 Vdc from the NMEA 2000 bus- NMEA 2000 Power Usage: 1.1 W max- NMEA 2000 Load Equivalency Number (LEN): 2 (100 mA)

Garmin Gws 10

Garmin Gws 10. The GWS 10 wind sensor gives you, the sailer, even more control by allowing you to maximise the performance and speed of your boat with wind vane technology.Discover the Benefit of Harnessed Wind PowerGWS 10 uses a wind vane for detection of wind direction and an anemometer to register wind speed. These measurements enhance your boat’s potential as you adjust your sail accordingly to harness the wind’s strength.Besides delivering wind measurements, GWS 10 captures barometric pressure and air temperature data. When combined with other sensors, GWS 10 enables those on board to gather specific wind data such as ground and true wind, wind VMG and track heading.Enjoy Simple Interface and NMEA 2000 ConnectivityCombining wind and weather measurement from a single, integrated sensing unit, GWS 10 installs with ease – providing data output to your cockpit display via NMEA 2000 cable and bus, which powers the unit. GWS 10 is designed to interface with Garmin’s GMI™ 10 universal marine instrument, the 4000 and marine touchscreen 5000 chartplotter series or any manufacturer’s NMEA 2000-enabled chartplotters and displays.Garmin GWS 10: Harnessing wind power in a complete mini weather station.Whats in the box:- GWS 10 Wind Sensor- Mounting hardware- NMEA 2000 backbone cable on spool- NMEA 2000 field installable connector- NMEA 2000 in-line terminator- In-line lightning arrestor- DocumentationCompatible Devices:GMI 10 Marine InstrumentGMI 20 Marine InstrumentGNX 20 Marine InstrumentGNX 21 Marine InstrumentGPSMAP 4008GPSMAP 4010GPSMAP 4012GPSMAP 451GPSMAP 451sGPSMAP 5008GPSMAP 5012GPSMAP 5015GPSMAP 521GPSMAP 521sGPSMAP 551GPSMAP 551sGPSMAP 556GPSMAP 556sGPSMAP 6008GPSMAP 6012GPSMAP 7012GPSMAP 7015GPSMAP 720GPSMAP 750GPSMAP 8008 MFDGPSMAP 8012 MFDGPSMAP 8015 MFDGPSMAP 8500 Black BoxGPSMAP 8530 Black Box

Garmin Belt Clip For Ghs 20i

Garmin Belt Clip For Ghs 20i. Attach your GHS 20/20i to your belt with this belt clip.

Garmin Protective Cover For Vhf 100i & 200i

Garmin Protective Cover For Vhf 100i & 200i. Our protective cover fits your VHF series, keeping them safe from the harsh marine environment when not in use.