Boutique slm
Bons plans
Accueil >> ELECTRONICS AND ELECTRICITY > ACCESSORIES de plongée
27.15 EUR
Actisense Rs232 To Usb Converter
Actisense Rs232 To Usb Converter. The Actisense PC-USB-1 is an intelligent, external RS232 serial connection compatible with most computers and other devices that support USB connection.With a standard D-type 9-pin male connector for the peripherals to plug in to and an attached 35cm USB cable with a type A plug for connecting to the computing devices USB port or USB hub.The PC-USB-1 can support multiple adapters per PC and will remember the exact communication port that each cable was last given by Windowsâ„¢. This ensures that all subsequent PC boot-ups will use the same set up and communicate correctly with the linked PC software. For a fully isolated NMEA 0183 USB to serial converter, see the Actisense USG-1, isolated USB to serial gateway.
133.92 EUR
Actisense Nmea0183 To Nmea2000 Usb Gateway
Actisense Nmea0183 To Nmea2000 Usb Gateway. The Actisense NGW-1 NMEA 2000 Gateway is the easiest way to link between a boats old and new data networks. The NGW-1 can convert NMEA 0183 data into NMEA 2000 data and vice-versa.Using the advanced configuration software provided, it is straightforward to set up which data conversions are required for both directions.Please go to the Downloads tab to see the up to date list of conversions the various configurations can handle. Multiple NGW-1 units can be used to multiplex numerous NMEA 0183 devices onto the NMEA 2000 network, using the network as a means of combining and transferring all data items from one place to another.The Actisense NMEA Reader software utility allows the NGW-1 user to view and understand (in detail) the translated NMEA 0183 sentences output by an NGW-1 directly.The NGW-1 is available in four configurations:NGW-1-ISO is the standard option. With an opto-isolated input and ISO-Drive output for direct NMEA 0183 device bi-directional connection.NGW-1-ISO-AIS is the NMEA 0183 AIS option. This is a pre-configured version of the standard NGW-1-ISO that enables the conversion of NMEA 0183 AIS data to its equivalent in NMEA 2000. This provides an out of the box solution for quick installation with no configuration required. Please see the conversion list in the downloads section to see which AIS conversions the unit can perform.NGW-1-USB is the NMEA 0183 chartplotter option. USB (1.1 and 2.0) interface for bi-dircetional connection to a PC.NGW-1-STNG is the Raymarine SeaTalk NG option. This version enables users to convert NMEA 0183 data into SeaTalk NG and vice-versa, providing seamless integration with Raymarine products. The NGW-1-STNG option combines a standard NGW-1-ISO with a Raymarine SeaTalk NG adapter cable to interface legacy instruments to the NMEA 2000 based SeaTalk NG bus. Features- Converts the most common NMEA 0183 sentences into NMEA 2000 PGNs- Converts the most common NMEA 2000 PGNsinto NMEA 0183 sentences- Opto-isolation on NMEA 0183 input- Isolation on NMEA0183/ISO Drive" output- Opto-isolation on NMEA 2000 CAN bus connection- Compatible with all NMEA 0183 versions without configuring- NMEA 0183 output compatible with RS422.RS232 and RS485 type Listeners- NMEA 0183 input compatible with RS422andtype talkers- Configuration options available in NMEA Reader- Configurable baud rate- Transfer list for selecting which NMEA 2000 PNGs are sent and received.- Free Firmware updates provided when newfeatures and conversions are added update in the field via PC.- Prefitted cables for ease of installation Screw terminals for easy installation of customcables if required- Four available variants for different installations situations (see part code list on next page)- Adapter cable for connecting to Raymarine"Seatalk"0 networks provided with the STNG variant.- Multiple NGW-1 units can be used to multiplex numerous NMEA 0183 devices onto theNMEA 2000 network
12.46 EUR
Actisense Ndc-4 To Ndc-4-usb
Actisense Ndc-4 To Ndc-4-usb. The Actisense NDC-4 and NDC-4-USB allow up to five OPTO isolated NMEA 0183 sources to be multiplexed into a single stream*.Two flexible ISO-Drive outputs allow two different downstream talker baud rates to be created, ensuring maximum system flexibility.The NDC-4 is flexible and powerful enough to be the heart of a simple system, or one of many Actisense products in a more complex system. It provides complete access to all NMEA 0183 data sources, configurable filters to remove unwanted data, as well as enabling an on-board PC to read and add the combined data stream.Factory preconfigured versions enable the NDC-4 to be used out of the box for AIS operation (NDC-4-AIS) or as an Autoswitch (NDC-4-ASW).*Four inputs on the USB version, as the USB interface acts as the fifth channel, overriding the fifth OPTO input.Benefits of the NDC-4 versions:Multiplex up to five NMEA 0183 devicesFilter unwanted dataFive flexible versions available (NDC-4, NDC-4-USB, NDC-4-ASW, NDC-4-AIS & NDC-4-AIS-USB)Preconfigured versions for AIS and Autoswitch operationUSB kit (NDC-4-USBKIT) converts an NDC-4 to an NDC-4-USB
315.44 EUR
Actisense Emu-1 Engine Monitoring Unit
Actisense Emu-1 Engine Monitoring Unit. The Actisense EMU-1 is a specialised analogue to NMEA 2000 Gateway which converts data from analogue engine senders into NMEA 2000. The EMU-1 enables NMEA 2000 display devices to monitor the engine on a vessel.The EMU-1 has a PC based configuration tool that allows the settings inside the EMU-1 to be changed to best suit the engine it is working with, making it a flexible solution for many engine makes and models. Capable of measuring a wide range of engine parameters, the EMU-1 reports how the engine is operating and shares the information across the network.Designed to simplify the conversion of analogue engine parameters (e.g. Temperature, pressure and RPM) into NMEA 2000 engine PGNs, the EMU-1 simplifies processes and reduces the number of input/output wires required at each engine. Additionally, the EMU-1 also supports the conversion of analogue transmission parameters and battery status to the associated NMEA 2000 PGNs.The two-part screw terminal connection system allows for an easy pluggable connection to an engine wiring harness.Multiple engines are supported by the setting of the engine instance using the EMU-1 configuration tool. Currently one EMU-1 per engine is supported. Support for multiple engines on a single EMU-1 is currently planned as a future firmware update. The customised case ensures that the electronics are sealed while allowing quick access to the electrical connections.An optional DIN rail mounting kit is also available. The kit is suitable for use with a top hat rail, type EN 50 022 or a G section rail, type EN 50 035. Please order the DIN rail kit using part number: DIN-KIT-1.It is recommended that an Actisense NGT-1 NMEA 2000 PC Interface is available for every EMU-1 installation. The NGT-1 can be used to update the Firmware, connect the Configuration Tool and display data on a PC for diagnostic and information purposes, using NMEA Reader. Please visit the NGT-1 page for product details.Features- 6 Gauge inputs- 4 Alarm inputs- 2 Tacho inputs- Logs total engine lime using the tacho inputs- 2 Auxiliary inputs for additional flexibility- Simple single wire gauge connections; common ground referenced- Manual measurements not required when configuring- Firmware can be updated over NMEA 2000 network- Easy customisation for different installations (requires an NGT-1 and PC software)- Waterproof electronic and splash-proof connections Pluggable connectors for quick and easy installation- Optional DIN rail mounting kit available
27.15 EUR
Actisense Rs232 To Usb Converter
Actisense Rs232 To Usb Converter. The Actisense PC-USB-1 is an intelligent, external RS232 serial connection compatible with most computers and other devices that support USB connection.With a standard D-type 9-pin male connector for the peripherals to plug in to and an attached 35cm USB cable with a type A plug for connecting to the computing devices USB port or USB hub.The PC-USB-1 can support multiple adapters per PC and will remember the exact communication port that each cable was last given by Windowsâ„¢. This ensures that all subsequent PC boot-ups will use the same set up and communicate correctly with the linked PC software. For a fully isolated NMEA 0183 USB to serial converter, see the Actisense USG-1, isolated USB to serial gateway.
133.92 EUR
Actisense Nmea0183 To Nmea2000 Usb Gateway
Actisense Nmea0183 To Nmea2000 Usb Gateway. The Actisense NGW-1 NMEA 2000 Gateway is the easiest way to link between a boats old and new data networks. The NGW-1 can convert NMEA 0183 data into NMEA 2000 data and vice-versa.Using the advanced configuration software provided, it is straightforward to set up which data conversions are required for both directions.Please go to the Downloads tab to see the up to date list of conversions the various configurations can handle. Multiple NGW-1 units can be used to multiplex numerous NMEA 0183 devices onto the NMEA 2000 network, using the network as a means of combining and transferring all data items from one place to another.The Actisense NMEA Reader software utility allows the NGW-1 user to view and understand (in detail) the translated NMEA 0183 sentences output by an NGW-1 directly.The NGW-1 is available in four configurations:NGW-1-ISO is the standard option. With an opto-isolated input and ISO-Drive output for direct NMEA 0183 device bi-directional connection.NGW-1-ISO-AIS is the NMEA 0183 AIS option. This is a pre-configured version of the standard NGW-1-ISO that enables the conversion of NMEA 0183 AIS data to its equivalent in NMEA 2000. This provides an out of the box solution for quick installation with no configuration required. Please see the conversion list in the downloads section to see which AIS conversions the unit can perform.NGW-1-USB is the NMEA 0183 chartplotter option. USB (1.1 and 2.0) interface for bi-dircetional connection to a PC.NGW-1-STNG is the Raymarine SeaTalk NG option. This version enables users to convert NMEA 0183 data into SeaTalk NG and vice-versa, providing seamless integration with Raymarine products. The NGW-1-STNG option combines a standard NGW-1-ISO with a Raymarine SeaTalk NG adapter cable to interface legacy instruments to the NMEA 2000 based SeaTalk NG bus. Benefits of the NGW-1:Upgrade NMEA 0183 equipment to NMEA 2000Allow NMEA 0183 devices to receive vital NMEA 2000 dataUse the NMEA 2000 bus to multiplex several NMEA 0183 signals togetherConfigure using NMEA ReaderConverts the most common NMEA 0183 sentences into NMEA 2000 PGNs- Converts the most common NMEA 2000 PGNs into NMEA 0183 sentences- Galvanic Opto-isolation on NMEA 0183 input- Galvanic isolation on NMEA 0183 / ISO-Drive™ output- Galvanic Opto-isolation on NMEA 2000 CAN bus connection- Compatible with all NMEA 0183 versions without configuring- NMEA 0183 output compatible with RS422, RS232 and RS485 type listeners- NMEA 0183 input compatible with RS422 and RS232 type talkers- Configuration options available in NMEA Reader- Configurable baud rate- Transfer list for selecting which NMEA 2000 PGNs are sent and received- Free Firmware updates provided when new features and conversions are added - update in the field via PC- Pre-fitted cables for ease of installation- Screw terminals for easy installation of custom cables if required- Four available variants for different installation situations (see part code list on next page)- Adaptor cable for connecting to Raymarine® SeatalkNG networks provided with the STNG variant- Multiple NGW-1 units can be used to multiplex numerous NMEA 0183 devices onto the NMEA 2000 network
112.12 EUR
134.16 EUR
12.46 EUR
Actisense Ndc-4 To Ndc-4-usb
Actisense Ndc-4 To Ndc-4-usb. NDC-4 easily becomes a NDC-4-USB quickly using this cable. The USB cable is designed for direct connection to PC USB port.
17.57 EUR
237.48 EUR
Airmar Speed & Temp Data To Nmea 0183 Converter Box
Airmar Speed & Temp Data To Nmea 0183 Converter Box. Analog converter box speed and temperature data to NMEA 0183. Typically used to convert CS4500 for use with NMEA devices.
393.21 EUR
Airmar Sb260 1kw Switch Box Dual Frequency
Airmar Sb260 1kw Switch Box Dual Frequency. The Box SB260 connects two different transducers to the same probe and display just two displays distintosde transducer probe.
26.35 EUR
Airmar S / St 600 / 610 / St800 Paddle Wheel And Valve
Airmar S / St 600 / 610 / St800 Paddle Wheel And Valve. Paddle wheel and valve Kit S600, ST600, S610, ST610, ST800
6.23 EUR
Airmar Plastic Th Cap Nut
Airmar Plastic Th Cap Nut. Mounting thread for B44V Transducers, B744V, B744VL, ST850, ST650, ST800, ST600, ST600, ST300, P8, P17, P217, P314, B17, B21, B120, SS557
19.17 EUR