Boutique slm
Bons plans
Accueil >> REGULATORS de plongée
99.54 EUR
Cressi First Stage Mc5
Cressi First Stage Mc5. The MC5 first stage was designed completely in the Cressi Engineering and Development Centre.It is a balanced diaphragm first stage of an extremely moderate size and weight, which encompasses a high concentration of technology.A brand new sliding cylinder of the poppet, made from a special self-lubricating technopolymer minimises internal attrition and completely eliminates any possible oxidisation that could alter the performance of the regulator over time.The excellent performance has been improved even further by a special assistance chamber that triggers off a strong Venturi effect between the central diffuser and the intermediate pressure outlets.The hyper-balanced diaphragm mechanism not only maintains regulator performance when the pressure in the tanks changes and when diving deeper, but even improves performance in the notoriously most critical final phase of the dive.A sintered filter with a larger surface area withholds impurities present in the incoming air.The low and high pressure outlets are pre-oriented for optimum placement of the hoses.The very small cylindrical body is completely covered by an elastomer protective shell.It is quick and easy to pull apart the regulator for maintenance with the new INT yoke connection system or the internally threaded DIN connector.Technical specifications•Hyper-balanced diaphragm first stage•Three pre-oriented low pressure outlets•One high pressure outlet•Sintered filter with larger surface area•First stage completely protected by an elastomer shell•Available with INT yoke or with DIN 200/300 bar connection•Weight MC5 with INT yoke: 550 g•Weight MCR with DIN connection 300 bars: 450 g
2.84 EUR
2.70 EUR
Cressi Clip Octopus Holder
Cressi Clip Octopus Holder. Octopus Holder. Keep your octopus safe with you.Color: Yellow
163.16 EUR
Cressi Ellipse Titanium - Mc9
Cressi Ellipse Titanium - Mc9. Pairing of 2nd stage Ellipse Titanium with the 1st stage hyper-balanced MC9.This is a very high performance regulator, with the best Cressi 1st stage that feeds a sophisticated 2nd stage; a true market leader thanks to its dimensions and lightness. 2nd stage Ellipse TitaniumA latest generation regulator, loved by both professional and recreational divers thanks to its excellent performance. The small size, combined with the use of sophisticated techno-polymers and various titanium parts allow the weight to be kept to an exceptional minimum. Technologically the regulator is truly avant-garde, thanks to a series of unprecedented features, covered by a patent, that enhance its performance. Amongst which:The elliptical casing with special fold out opening.Instant cam-lock closure of the casing.The folding diaphragm for use with a large regulator lever. The regulator lever with its computer designed profile.The tilting movement of the piston.The insulating anti-freeze between the regulator valve and casing.The possibility of removing the entire regulating system from the body of the 2nd stage, for quick and easy maintenance.The result of so much technology is a regulator that supplies air smoothly and with unprecedented fluidity.All this with an excellent price/quality ratio.Technical features of the 2nd stage Ellipse Titanium with 1st stage MC9 * Average inhalation effort: 4 mbar * Average exhalation effort: 11 mbar * Average breathing labour: 0.95 J/l * Quantity of air supplied: 1800 l/m (*) * Weight without hose 158 g(*) Values measured in compliance with standard UNI EN 250. 1st stage MC9Hyper-balanced Diaphragm 1st stage with highly technological content that places it at the top of the Cressi range.Very light body covered by a protective elastomer shell.Cylinder sheathed in an antifriction and anticorrosion material that guarantees perfect sliding of the piston and long maintenance intervals.The nozzle, made from 316 stainless steel, can be easily replaced, thus ensuring perfect air-tightness, even after many years of use.Advanced research on the passage of internal air and a special assistance chamber have enabled the drop of pressure upon inhalation to be kept to a minimum, thus guaranteeing high performance in any situation.Hyper-balancing allows for an increase of the intermediate pressure at maximum depths and lowering of the pressure in the tank, offering higher performance during the delicate ascent phase and at maximum depths. DIN 200/300 bar fitting in stainless steel which prevents deformation of the thread in the event that the regulator suffers any falls.MC9 diaphragm 1st stage - Technical Features * Working pressure (INT connection): 0-232 bar * Working pressure (DIN connection): 0-300 bar * Calibration pressure: 10 bar * Calibration adjustment range: +/- 0.5 bar * Air supply: 4500 l/min (*) * High pressure seats (HP) 2 * Low pressure seats (LP) 4 * Weight with INT connection: 590 g * Wight with DIN connection: 450 g (*)values measured at LP seat outlet with second stage connected and 150 bar pressure in the cylinders.
248.85 EUR
Cressi Ellipse Balanced R - Mc9
Cressi Ellipse Balanced R - Mc9. Pairing of balanced and adjustable 2nd stage Ellipse Balanced with the hyper-balanced 1st stage MC9.Thanks to the performance and the highly technological content of both stages this regulator is placed at the very top of the Cressi range.The user can adjust both the inhalation effort and the Venturi effect (dive / pre-dive) at any time during the dive.2nd stage Ellipse BalancedMany of the exclusive technical characteristics of Ellipse, covered by 4 international patents, have been transferred to this new second stage.Ellipse Balanced has a slightly larger casing which is made from a sound absorbing material, and a new diaphragm that further improves the already very low inhalation effort of Ellipse.The weight is very low (the lightest in the category).The pneumatic balancing system of the piston allows for constant performance at any depth and with any air pressure in the tanks.An easy grip knob allows for the instant adjustment of the inhalation effort, even when wearing gloves, thus regulating it as first regulator or as spare regulator depending on the preferences of the user and the required use.The regulation system is protected by a double seal and is fully protected from contact with water, thus maintaining smooth rotation even over time.A small lever, located in the upper part of the casing, acts as a flow deviator and allows the Venturi effect to be adjusted. When placed in position (-) it functions as pre-dive, for getting into the water and the first stages of the dive, whilst when moved to (+) it allows the regulator to develop its maximum performance.An internal heat exchanger optimises the performance of the regulator even in cold waters. The special study of air flows inside the casing has meant that absolutely natural, smooth and very silent breathing has been obtained.The standard release baffle can be directly replaced by the user for a larger model, supplied as standard, which pushes the bubbles further way from the diver’s face.The possibility of quickly removing the entire mechanical part from the casing significantly aids maintenance operations.Technical Characteristics of the 2nd stage Ellipse Balanced with 1st stage MC9 * Average inhalation effort 3 mbar * Average exhalation effort 8 mbar * Average breathing labour 0.75 J/l * Quantity of air supplied 2500 l/m (*) * Weight without hose 170 g(*) Values measured in compliance with standard UNI EN 250. 1st stage MC9 Hyper-balanced Diaphragm 1st stage with highly technological content that places it at the top of the Cressi range.Very light body covered by a protective elastomer shell.Cylinder sheathed in an antifriction and anticorrosion material that guarantees perfect sliding of the piston and long maintenance intervals.The nozzle, made from 316 stainless steel, can be easily replaced, thus ensuring perfect air-tightness, even after many years of use.Advanced research on the passage of internal air and a special assistance chamber have enabled the drop of pressure upon inhalation to be kept to a minimum, thus guaranteeing high performance in any situation.Hyper-balancing allows for an increase of the intermediate pressure at maximum depths and lowering of the pressure in the tank, offering higher performance during the delicate ascent phase and at maximum depths. DIN 200/300 bar fitting in stainless steel which prevents deformation of the thread in the event that the regulator suffers any falls.MC9 diaphragm 1st stage - Technical Features * Working pressure (INT connection): 0-232 bar * Working pressure (DIN connection): 0-300 bar * Calibration pressure: 10 bar * Calibration adjustment range: +/- 0.5 bar * Air supply: 4500 l/min (*) * High pressure seats (HP) 2 * Low pressure seats (LP) 4 * Weight with INT connection: 590 g * Wight with DIN connection: 450 g(*)values measured at LP seat outlet with second stage connected and 150 bar pressure in the cylinders.
259.90 EUR
Cressi Ellipse Balanced R - Mc9 Sc
Cressi Ellipse Balanced R - Mc9 Sc. Pairing of balanced and adjustable 2nd stage Ellipse Balanced with the hyper-balanced 1st stage MC9- SC.Thanks to the performance and the highly technological content of both stages this regulator is placed at the very top of the Cressi range.The user can adjust both the inhalation effort and the Venturi effect (dive / pre-dive) at any time during the dive.The 1st stage MC9 - SC is identical to model MC9, but with a special Seal Chamber which completely isolates the diaphragm and spring from contact with water.Ideal for diving in waters that are rich in suspension and mineral salts, for archaeological work, for potholing and diving in cold waters.2nd stage Ellipse BalancedMany of the exclusive technical characteristics of Ellipse, covered by 4 international patents, have been transferred to this new second stage.Ellipse Balanced has a slightly larger casing which is made from a sound absorbing material, and a new diaphragm that further improves the already very low inhalation effort of Ellipse.The weight is very low (the lightest in the category).The pneumatic balancing system of the piston allows for constant performance at any depth and with any air pressure in the tanks.An easy grip knob allows for the instant adjustment of the inhalation effort, even when wearing gloves, thus regulating it as first regulator or as spare regulator depending on the preferences of the user and the required use.The regulation system is protected by a double seal and is fully protected from contact with water, thus maintaining smooth rotation even over time.A small lever, located in the upper part of the casing, acts as a flow deviator and allows the Venturi effect to be adjusted. When placed in position (-) it functions as pre-dive, for getting into the water and the first stages of the dive, whilst when moved to (+) it allows the regulator to develop its maximum performance.An internal heat exchanger optimises the performance of the regulator even in cold waters. The special study of air flows inside the casing has meant that absolutely natural, smooth and very silent breathing has been obtained.The possibility of quickly removing the entire mechanical part from the casing significantly aids maintenance operations.Technical Characteristics of the 2nd stage Ellipse Balanced with 1st stage MC9-SC* Average inhalation effort: 3 mbar* Average exhalation effort: 8 mbar* Average breathing labour: 0.75 J/l* Quantity of air supplied: 2500 l/m (*)* Weight without hose 170 g(*) Values measured in compliance with standard UNI EN 250. 1st stage MC9-SCHyper-balanced Diaphragm 1st stage with highly technological content that places it at the top of the Cressi range.Very light body covered by a protective elastomer shell.Cylinder sheathed in an antifriction and anticorrosion material that guarantees perfect sliding of the piston and long maintenance intervals.The nozzle, made from 316 stainless steel, can be easily replaced, thus ensuring perfect air-tightness, even after many years of use.Advanced research on the passage of internal air and a special assistance chamber have enabled the drop of pressure upon inhalation to be kept to a minimum, thus guaranteeing high performance in any situation.Hyper-balancing allows for an increase of the intermediate pressure at maximum depths and lowering of the pressure in the tank, offering higher performance during the delicate ascent phase and at maximum depths. DIN 200/300 bar fitting in stainless steel which prevents deformation of the thread in the event that the regulator suffers any falls.MC9 SC diaphragm 1st stage - Technical Features* Working pressure (INT connection): 0-232 bar* Working pressure (DIN connection): 0-300 bar* Calibration pressure: 10 bar* Calibration adjustment range: +/- 0.5 bar* Air supply: 4500 l/min (*)* High pressure seats (HP) 2* Low pressure seats (LP) 4* Weight with INT connection: 650 g* Wight with DIN connection: 510 g(*)values measured at LP seat outlet with second stage connected and 150 bar pressure in the cylinders.
136.46 EUR
Cressi Ellipse Black Mc5
Cressi Ellipse Black Mc5. This regulator is made up of the excellent 2nd stage Ellipse, with elastomer cover (Black version) combined with the MC5 diaphragm first stage.Its strengths lie in its extreme lightness, excellent performance, very easy maintenance and affordable purchase price.1st stage MC5The MC5 first stage, which was entirely developed by the Cressi Design and Development Centre, is a diaphragm first stage of extremely low weight and size with highly technological content.The sliding cylinder of the piston is sheathed with a special self-lubricating polymer which reduces internal friction to a minimum and totally eliminates any possible oxidisation that could alter the performance of the regulator over time.The high performance is further increased by a special assistance chamber that triggers a strong Venturi effect between the central diffuser and the intermediate pressure outlets.The hyper-balanced diaphragm mechanism not only maintains the performance of the regulator when the pressure in the tanks varies and depth increases, but even increases performance in the final stage of the dive, notoriously the most critical.A sintered filter with a greater surface area traps the impurities in the incoming air.The low and high pressure outlets are pre-oriented for ideal placement of the hoses.The small cylindrical body is completely covered by a protective elastomer shell.Dismantlement and maintenance are quick and easy thanks to the new INT yoke connection system or the internally threaded DIN fitting.Technical features- Hyper-balanced diaphragm first stage- 3 pre-oriented low pressure outlets- 1 high pressure outlet- Sintered filter with greater surface area- First stage completely protected by an elastomer shell- Available with INT yoke or with DIN 200/300 bar fitting- Weight of MC5 with INT yoke: 550 g- Weight of MCR with DIN 300 bar fitting: 450 g
15.64 EUR
Cressi L.p. Hose
Cressi L.p. Hose. Flexible MP superflow The yellow one for the octopus length 100cmThe black one for the regulator (2nd stage)length 80cm
62.56 EUR
Cressi Octopus Ellipse
Cressi Octopus Ellipse. Octopus Ellipse uses the same casing as the Ellipse model made from special hi-tech polymers, the only difference being the yellow front cover.The hose is also yellow and is longer (100 cm against the standard 76 cm).All the parts of Ellipse, most of which are patented, can be found on this regulator: the fold-out opening of the casing, the special folding diaphragm, the computer designed lever, the tilting movement of the piston, the seal between regulator valve and casing, the possibility of extracting the entire valve system from the body of the 2nd stage.A flow of pilot air is channelled to the mouthpiece by injection, enhancing the performance. The upper part of the body has a flow deviator that acts on the Venturi effect, with dive/pre-dive function.The performance is extremely high, although the calibration is regulated so that the inhalation effort is slightly greater than on the Ellipse, to prevent any self-regulating possibility when it is used as a spare regulator.Octopus Ellipse suits all the Cressi first stages perfectly and all the first stages with an intermediate pressure between 9 and 10 bar. Ellipse 2nd stage * Calibration pressure 9-10 bar * Average inhale effort (*) 8 mbar * Average exhale effort (*) 11 mbar * Average breathing work (*) 1.3 J/l * Air supply 1300 l/m Weight (without hose) 166 g(*)values measured in compliance with UNI EN 250 standards.
93.21 EUR
Cressi Xs2 - Ac2
Cressi Xs2 - Ac2. Compact, lightweight conventional 1st stage which gives similar performance to a balanced piston model. • First class materials, extremely easy to use and maintain. Features:- 2 pairs of low pressure ports; pre-angled to ensure perfect connection with 2nd stage connectors and instruments, making diving more comfortable. - Quick and easy to adjust thanks to Cressi’s exclusive rotating ring nut system - the only one of its kind. The device can be calibrated quickly and accurately using a special key without dismantling the regulator. - Powerful internal conical filter with 200% greater filtering power than standard flat models.- Maximum air capacity 2,100 litres/minute thanks to new wider hoses. - Rod and DIN type connectors (200 and 300 bar) are fully interchangeable and easy to replace. - Satin finish. Brand new model made from the best possible materials with a range of specially developed technical innovations. • New, larger high-tech-polymer injector delivers air directly to the mouthpiece. - Cressi-sub I.B.I. (Internal Balance Injection) system.- Flow control valve which exploits the significant Venturi effect created by the I.B.I. system to the full. - New profile of nozzle on/off lever creates a perfect seal with the membrane disk. The significant fulcrum and absence of friction let air flow freely. - Inhalation effort reduced to a minimum, even in the most challenging conditions. - Large purge valve and purge hose with new internal design guarantee outstanding performance (see P/V diagram). - Awarded CE mark, having passed rigorous UNI EN 250 European standards at all diving temperatures (as low as 4°C). •- Attractively designed cap with screw-type catch and special lock.XS2 e
54.39 EUR
Cressi Octopus Xs
Cressi Octopus Xs. The Octopus XS uses the same casing as the XS2 model, the only difference being the yellow front cover.The hose is also yellow and is longer (100 cm against the standard 76 cm).All the mechanics are identical to the XS2 model and consists of a downstream side valve system, with adjustable orifice, simple and extremely reliable.A flow of pilot air is channelled to the mouthpiece by injection, enhancing the performance. The upper part of the body has a flow deviator that acts on the Venturi effect, with dive/pre-dive function.Constantly reviewed over the years, this regulator has lots of admirers in the world due to the fact that it is extremely simple and strong, features that make it easy to use and result in low-cost maintenance.In any case, performance levels are high, although the calibration is regulated so that the inhalation effort is slightly greater than on the XS2, to prevent any free-flow possibility when it is used as a spare regulator.The air supply pressure can be adjusted between 9 and 10 bar, perfectly suited to all the Cressi first stages.
1.53 EUR
Dive Rite Hose Clip Retainer
Dive Rite Hose Clip Retainer. If you don’t have the time or patience for tying knots then, the Hose Clip Retainer is the solution. This re-usable bungee with tab can be used to secure a bolt snap to a hose, a gauge or a light. Simply thread the bungee loop through the eyelet of a snap, stretch around the hose, and bring the bungee loop over the tab. Keep a dozen of these in your dive kit; you’ll be surprised how quickly your dive buddies “borrow†them never to return.
63.70 EUR
Dive Rite Argon Bottle Regulatro First Stage
Dive Rite Argon Bottle Regulatro First Stage. Our Argon Bottle Drysuit Inflation Regulator is a compact first stage regulator that can be used on any 200 BAR DIN valve. Measuring only 2 3/8-inches (6 cm) tall, this is the most compact suit inflation regulator available. It has an unbalanced piston first stage with an intermediate pressure of 120 psi and includes an over pressurization valve.Specifications:- Two low pressure ports (3/8-24 UN)- Temperature rating: 50 to 95 F (10 to 19 C)- Intermediate pressure of 120psi- 8 oz (226.8 g)CONNECTIONS: DIN 200WITH PISTONOFFSET: NOROTATING TURRET: NOCOLD WATER KIT: NO
280.18 EUR
Hollis 221 / Dc3 Din Non Swivel
Hollis 221 / Dc3 Din Non Swivel. Built with the same quality as the DC1, without the swivel turret, the DC3 is the ideal 1st stage for double cylinder configuration as well as perfect for single cylinders. Paired with the 221 which uses the same technology as the 212 without the dynamic adjustment. This reg set is designed for those who believe keeping it simple is best.Features:221 Second Stage:- Pneumatically balanced second stage.- Ergonomic A.V.S. (Adjustable Venturi System) Dive/Pre-Dive Switch- Patented Orthodontic Mouthpiece with High Density Bite Tabs li>.DC3 1st Stage:- High performance over-balanced first stage provides progressively greater intermediate pressure as depth and gas density increases for superior gas delivery under the most extreme conditions.- Designed to withstand the rigorous CE standard for coldwater performance.- Environmental sealing prevents internal corrosion, contaminants, and icing of the first stage.Specifications:- 4 low pressure ports.- 1 high pressure port.- Yoke or 300 Bar Din.- Nitrox compatible to 40%.
282.24 EUR
Hollis 212 / Dc1 Din Non Swivel
Hollis 212 / Dc1 Din Non Swivel. Just in - "Testers Choice" by Sport Diver UK. Now have unlimited versatility in our top of the line regulator and a 5 out of 5 winner according to Scubalab. We have just added a 5th low pressure that points directly down from the first stage providing easier hose routing for backmounted doubles, sidemount or even for recreational divers.-212 Second Stage:Pneumatically balanced second stage.Patented Dynamic Adjustment once set automatically maintains inhalation effort throughout the dive by compensating for depth changes.-DC1 1st Stage:High performance over-balanced first stage provides progressively greater intermediate pressure as depth and gas density increases for superior gas delivery under the most extreme conditions.Swivel turret allows for ideal low pressure hose routing.Environmental sealing prevents internal corrosion, contaminants, and icing of the first stage.Designed to withstand the rigorous CE standard for coldwater performance.FEATURES:-Patented Orthodontic Mouthpiece for comfort and reduced jaw fatigue.-Easy grip controls for precise adjustment even while wearing gloves.-Venturi Switch for simple Dive/Pre-Dive modes.-Nitrox compatible to 40%.-2 high pressure ports.-5 low pressure ports.-Yoke or DIN/300 bar.