Sea And Sea Set Ys-110

Sea And Sea Set Ys-110. The Set includes:

- Strobe YS-110

- Sea Arm VII

- Fiber Optic Cable L-Type

- Strobe Mask Set

YS-110α

Further improves the accuracy of the DS-TTL-s excellent performance. This is a new type of strobe building and improving on the basic functionality of the YS-110.

Compatibility list for YS-110α strobe and digital cameras on the market.

http://www.seaandsea.jp/products/strobe/ys110a/camera.html

*The Fiber-Optic Cable and the Strobe Mask Set are required when using the SEA&SEA strobe with a waterproof case made by another company.

Features:

Ultimate creative effects with subtle light balance.

The YS-110α introduces numerous new exciting functions, opening a whole new digital generation. For example, by connecting it to digital cameras with pre-flash function using a fiber-optic cable, the YS-110α can be used in the fully automatic DS-TTL adjustment mode (Digital Slave TTL).

Enjoy complete creative control - when you want absolute control over fine light adjustments, you can use a main strobe in DS-TTL mode and a secondary strobe in manual mode or you can set up an advanced lighting system using two strobes in DS-TTL mode. The DS-TTL adjustment function is also available using the light level control dial for fine control of the light amount when taking pictures in DS-TTL mode. You can also choose from 13 levels of manual controls when you do not want to leave the light adjustment up to the camera.

The flat, round, 105° beam angle (with diffuser), achieved by the balanced positioning of the 3 flash tubes, and the power of a Guide Number 22 are examples of the excellent performance of the strobe that is sure to satisfy even the most demanding professionals.

Specifications:

[ YS-110α Housing ]
[Guide Number (ISO 100/m) (land)] 22
[Beam Angle] 105°x 105° (with diffuser)
[Batteries] 4xAA A: 6V Ni-MH: 4.8V
[Number of Flashes*1] A: 230 Ni-MH: 330
[Recycle time (full)*2] A: 2.5 sec. Ni-MH: 1.9 sec.
[Color temperature] 5400K
[Color temperature w/diffuser] 5100K
[Depth rating] 60m / 200ft
[Dimensions (WxHxD)] 88x115x150mm / 3.5x4.6x6inch
[Weight] 700g / 24.5oz
[Underwater weight] -10g / -0.4oz

Others:

- Exposure control: DS-TTL, TTL, Light level control dial (GN): 1.4 / 2 / 2.5 / 2.8 / 3.5 / 4 / 4.5 / 5.6 / 6.7 / 8 / 11 / 16 / 22 (13 steps)
- Pre-flash control: Equipped with pre-flash cancel mode
- DS-TTL function
- Auto power OFF function
- Sync cord: 5-pin Sync cord/N17100, Fiber-Optic Cable (L-type)(optional)
- Over-pressure relief valve
- LED target light

*1 Number of flashes and recycle time depends on the battery brand, temperature and frequency of use. *2 Number of flashes and recycle time of Ni-MH batteries were tested on 2700mAh batteries.


- Sea Arm VII

This multi-arm & base-stay set has a plastic resin construction that prevents electric corrosion to enhance durability. The newly designed ball joints enable firmer tightening but also smoother loosening, which enhances grip performance and operability.
This is used in combination with the RDX-series housings for digital SLR cameras.
The separately retailed Sea Arm VII Basic Set and Ball Base (one component of the Sea Arm VII Set) are needed when two strobes are used.

*Choose the Sea Arm VII Basic Set when using an MDX-series housing (for digital SLR camera) or a video housing.


Specifications

- [Construction] Plastic resin reinforced with glass fiber

- [Length/Weight]

*Camera base: 135mm / 126g (5.4inch / 4.4oz)
*Double Ball S + Grip S: 190mm / 120g (7.6inch / 4.2oz)
*Double Ball M + Grip M: 230mm / 150g (9.2inch / 5.2oz)
*Head SS: 156mm / 52g (6inch / 1.8oz)
*Head S: 186mm / 71g (7.4inch / 2.5oz)
*Ball Base: 80mm / 51g (3.2inch / 1.8oz)
*Two Ball Joint sets: 80mm / 103g (3.2inch / 3.6oz)
*Slide Fixed Direct Arm: 59mm / 95g (2.3inch / 3.3oz)