Salvimar Lecoled Torch

Salvimar Lecoled Torch. Powerful and compact dive light, ideal for spearshing. Polycarbonate body, aluminum ring dissipator, synthetic anti-oxidation reector parabola. Use a single CREE 3W Q5 LED, able to release 340 lumens (about 7000 lux at 1 m), concentrated beam (XR-E LED size) with a color temperature of 6000K. Powered by 4 1.5 V AA batteries or AA rechargeable batteries (2700mAh), autonomy 5 hours or up to 17 hours with intermittent switching (60 sec on, 180 sec off). Watertight up to 50 m, magnetic switch. Autonomy and performances can vary depending on the batteries used.Features:- CREE 3W Q5 LED with aluminum dissipatorSpecifications:- Lenght: 160mm/6.3inch- Weight: 230gr- Watertight: 50m- Led high power: 3W CREE led- Luminous ux: 340lm- Color temperature: 6000K°- Batteries: 4 x AA 1.5V- Burning life: 5-17h*

Scubapro O-ring Head Nova Light

Scubapro O-ring Head Nova Light.

Scubapro Nova Light Spare Head

Scubapro Nova Light Spare Head. Successor focus Nova HP, this compact and lightweight LED bulb aluminum features a new design and a more powerful LED.The Nova Light 200 has a nominal output of 200 lumen and offers up to 3.5 hours of high-intensity light with 3 AAA alkaline batteries. Ideal as a focus of booking or travel that fits in any jacket pocket.

Scubapro Nova Light 230 Spare Body

Scubapro Nova Light 230 Spare Body. A medium sized high intensity LED for incredibly long burn-time: from 14 to 18 hours. The perfect primary light for recreational diving or as a backup for more technical dives.Features:- Rugged aluminum casing, even tougher than it appears.- Powered by three user-replaceable C alkaline batteries.

Scubapro Nova 200 Black

Scubapro Nova 200 Black. A successor of the Nova HP Light this compact, lightweight aluminum LED light features a new design and a more powerful LED. Nova Light 200 has a rated output of 200 lumens and delivers up to 8 hours of high intensity light with 3 AAA alkaline batteries. Ideal as backup or travel light that fits in any BC pocket.

Scubapro Spiral Cable Nova Light 230

Scubapro Spiral Cable Nova Light 230. A medium sized high intensity LED for incredibly long burn-time: from 14 to 18 hours.The perfect primary light for recreational diving or as a backup for more technical dives.Features:- Rugged aluminum casing, even tougher than it appears.- Powered by three user-replaceable C alkaline batteries.

Sea And Sea Ys-d1

Sea And Sea Ys-d1. The YS-D1 sets a new standard for underwater strobes. From subtle light output as low as guide number 1 to a maximum power of guide number 32, control of underwater lighting has become effortless with the YS-D1.Features:Equipped with SEA&SEA’s new slave TTL system called “DS-TTL ll: Revising the algorithms used for the DS-TTL system, the YS-D1 employs a totally new slave TTL system. The strobe can adjust the interval between the pre flash and the primary flash in order to be compatible with a wide-variety of cameras, if not all, on the market today. The strobe is equipped with DS-TTL ll mode which is more responsive, more precise and more reliable. The DS-TTL ll enables a variety of strobe sync photography such as slave TTL and slave manual (11 steps) with compact or digital SLR cameras. When used with a digital SLR camera in housing, the strobe can also be connected with a conventional sync cord and through a YS Converter for TTL strobe photography. In a clear water environment, two YS-D1 strobes in DS-TTL ll mode provide perfect lighting. When you would like to emphasize contrast, setting the main strobe in DS-TTL II mode and the secondary strobe in manual mode (11 steps) offers flexibility without limiting control. When underwater visibility is poor, two YS-D1’s set to manual mode may produce the best images. The YS-D1 is the most versatile underwater strobe available today. The DS-TTL exposure compensation function enables subtle lighting control by adjusting the Light Level dial in DS-TTL mode. Powered by only four AA batteries, the YS-D1 offers a maximum light output of Guide Number 32: Compared to the YS-110Alpha, the YS-D1 is 1EV more powerful, 50g (1.8oz) lighter and 10% smaller. Not only is the YS-D1 suitable for macro photography, but also is robust enough for wide-angle photography. it is also ideal for macro photography which requires delicate light level control. The strobe’s guide number can be reduced to 1. Highly versatile, the YS-D1 offers more automatic and manual control over lighting to get that perfect exposure. The YS-D1 is the world’s first slave TTL strobe equipped with an exposure compensation (EV) control function: By controlling the actual flash light level, the strobe realizes accurate exposure compensation with EV value. Regardless of a compact or a SLR camera, you can achieve any desired exposure compensation. However, many TTL systems are not reliable. The YS-D1’s DS-TTL exposure compensation function allows users to adjust the light level in TTL mode (-1.5EV, -1EV, -0.7EV, -0.3EV, +0.3EV, +0.7EV, +1EV, +1.5EV). A high-visibility three-colored LED indicator lamp is easy to read even during shooting Ready lamp:A red LED will be shown when the strobe has been charged and is ready to fire.TTL confirmation lamp:A green LED will be shown for two seconds to confirm DS-TTLll exposure.Slave TTL mode lamp:A blue LED will be shown when the strobe is set to Slave TTL mode and the strobe has been charged and is ready to fire. Two accessory diffusers: In macro photography when a wide beam is not necessary, no diffuser should be attached. For an even strong circular 100x100 light output is desired, mount the Diffuser 100. When a wide-angle lens is used, the diffuser 120 should be attached. Three beam angles can be selected in accordance with the photographer’s requirements. The YS-D1 is equipped with a function that automatically switches modes between slave and conventional sync cord or vice versa: The YS-D1 will auto-sense when a sync cord is connected, the slave ON/OFF switch will no longer be active. Simple controls and configuration enables easy operation. The light level control ratchets/clicks to aid in setting and operation. Strobe mount can be selected: With the conventional YS adaptor, the strobe can be moved only upward and downward. However, with the Ball Mount, the strobe can be moved in a variety of angles. Specifications: [ YS-D1 ] - [Guide Number (ISO 100/m) (land)] : 32, 24 (with Diffuser 100 attached), 20 (with Diffuser 120 attached)- [Beam Angle] : 80°x80° (without diffuser), 100°x100°(diffuser 100), 120° x 120° (diffuser 120)- [Batteries] : 4xAA A: 6V Ni-MH: 4.8V- [Number of Flashes*1] : A: 150 Ni-MH: 200- [Recycle time (full)*2] : A: 2.8 sec. Ni-MH: 1.9 sec.- [Color temperature] : 5600K- [Color temperature w/diffuser] : 5250K- [Depth rating] : 100m / 330ft- [Dimensions (WxHxD)] (Excluding protruding part(s) and the arm holder.): 87x135x111mm / 3.5 x 5.4 x 4.4 inches- [Weight] : 650g / 22.9oz (w/o batteries) * Attached a YS Mount- Strobe Adaptor and a fixing bolt to the Strobe.- [Underwater weight] : 0.5g / 0.02oz(w/ batteries)Others:- Exposure control: DS-TTL II, Slave TTL, Light level control dial (GN): 1 / 1.4 / 2 / 2.8 /4 / 5.6 /8 / 11 / 16 / 22 / 32 (11 steps)- Pre-flash control: Equipped with pre-flash cancel mode- DS-TTL II function- Slave function- Auto power OFF function- Sync cord: 5-pin Sync cord/N, Fiber-Optic Cable (L-type)- Over-pressure relief valve- LED target light*1 Number of flashes and recycle time depends on the battery brand, temperature and frequency of use.*2 Number of flashes and recycle time of Ni-MH batteries were tested on 2400 mAh batteriesWhats inclluded:- Strobe YS-D1- Ball Connection- Screw- 2 Difusors

Seacsub Flash Light Without Clip

Seacsub Flash Light Without Clip. Specifications: - Flashing underwater light for night time use or with low visibility. - Autonomy: 700 hours. - Swich-on: by touching the water. - Maximum depth: 100 meters.