Hollis Led 3

Hollis Led 3. Our first push into the Primary Lighting market included our innovative LED16 Canister System which offered a replacement and better alternative over traditional HID lighting and Multi-Array LED systems. Our goal was to revolutionize primary and backup lighting systems; doing so required extended burn times and efficiency while increasing output, but without the high price tag. We achieved our goal and now include this technology in our line of handheld lights. Meet the new range of LED lights; the envy of all professional and recreational divers worldwide. Features:- Single 3W backup Light- Concentrated 8 degree beam- Output 210 Lumen- Burntime - 4 hours total- Bulb life 50,000 hours- T6061-T6 Anodized Aluminum- 3 AAA alkaline batteries- Rear tie-point for boltsnap / lanyard included- Double O-ring seals- State of the art PMMA reflector

Ikelite Ds-200

Ikelite Ds-200. The venerable Substrobe 200 now has the newest IC chips and IGBT circuitry allowing this ultra wide and ultra powerful strobe to be compatible with current digital cameras and any TTL circuitry included in our housings. State-of-the-art electronics provide a blazing 200 watt seconds of power recycling in an incredible 1.6 seconds. This is a high performance professional strobe with the original features that revolutionized underwater photography. Mount the DS-200 on either side of the camera and the control panel and ready light are always visible for quick confirmation and easy access. The DS-200 offers four manual power modes or can be used with the optional #4100.6 EV Manual Controller for 10 manual power settings. The SubStrobe DS-200 delivers an even ultra wide 100 degree beam. The special "soft-lite" reflector produces softer, warmer, more natural colors. A diffuser is included to widen and soften the light even more. The built-in aiming light is more than just a target light; it is powerful enough to use as a night diving light. The main strobe electronics are sealed from the battery compartment, and the industrial grade NiMH battery module is easily removed. No more guessing about when to recharge; the DS-200 features an LED gauge which shows the remaining battery power. The battery door is easy to disassemble and clean. A switch lock is included to prevent accidental turning on of the strobe. Specifications- Energy Rating: 200 wat-sec - Recycle Time: 1.6 sec - Angle of Coverage: 100 degrees/ 110 degrees with diffuser - Guide (ISO 100) feet: 76 surface - 38 underwater - Guide meters: 24 surface - 12 underwater - Color Temperature: 4800 degrees Kelvin - Full Power Flashes: 160 flashes per full charge - Firing Modes: TTL, Full, 3 fractional powers - Modeling Light: Built-in Halogen - Battery Pack: NiMH module - Weight: 1.8 kg (3.9 lb) - Size: 11.5 cm dia x 19 cm/ 4.5" dia x 7.5" - Depth Rating: 90m - 300 feet

Imersion Mini Torche

Imersion Mini Torche. Easy to handle - 4 AA batteries (not provided) equipped with a lanyard.15 m Depth

Intova Silica Sticker

Intova Silica Sticker. Silica Gel sticker attached inside waterproof camera housing absorbs moisture to prevent fogging. Package contains 5 stickers.

Intova Battery For Intova Torch

Intova Battery For Intova Torch. Spare batteries for Intova Nova torches.

Kowalski Select Led 620 Li-ion Red

Kowalski Select Led 620 Li-ion Red. The new 620 Select LED gives you ultimate flexibility in a diving lamp. It has the option of three interchangeable heads to go on one power source. This torch also boasts the usual Kowalski build quality along with Lithium Ionen batteries that give an impressive 2 hours burn time @ 100% and a recharge time of only 2.5hrs max. All this in a torch that weighs under 1 kilo.The lamp comes as standard with an LED head of your choice, either a 12° spot version or the 70° flood version. You can then add different heads to suit your lighting needs or preferences.Three individual modules are available that can be exchanged within a few seconds: LED 12 ° Spot, LED Flood 70 ° or 10 ° 6V/20W halogen spot. The select 620 is equipped with all modules infinitely dimmable from 100% to 20%.Technical data- Housing: seawater resistant- Anodized aluminum.- Front Glass: mineral glass chemically cured- Depth: more than 200 m- Dimmable: Continuous 100% - 20%- Switches: Mechanical- Battery life: 7.4 V / 4.6 Ah (Li-Ion)- Discharge protection: yes- Charging time: max. 2.5 hoursLED Module: MC-E 10W- ± 10% burn time: 120 minutes at 100%- Burn time dimmed: 20% = ~ 480 min- Light angle: 12 ° Spot / 70 ° Flood- Luminosity: 18 000 Lux Spot- Flood 900 lux- Dimensions ø x L: 64 mm x 191 mm- Weight: 930 gThe Module LED flood for Select 620 comes as standard output 6500K (Cold White), but can be specified as 5000k output (Neutral white/Daylight) and also has the option of a Cree MT-G Easy White LED giving 3000k warm white output equivalent to halogen lamps. please email us for more information about delivery times for non standard light outputs.

Kowalski Select Led 620 Li-ion Silver

Kowalski Select Led 620 Li-ion Silver. The new 620 Select LED gives you ultimate flexibility in a diving lamp. It has the option of three interchangeable heads to go on one power source. This torch also boasts the usual Kowalski build quality along with Lithium Ionen batteries that give an impressive 2 hours burn time @ 100% and a recharge time of only 2.5hrs max. All this in a torch that weighs under 1 kilo.The lamp comes as standard with an LED head of your choice, either a 12° spot version or the 70° flood version. You can then add different heads to suit your lighting needs or preferences.Three individual modules are available that can be exchanged within a few seconds: LED 12 ° Spot, LED Flood 70 ° or 10 ° 6V/20W halogen spot. The select 620 is equipped with all modules infinitely dimmable from 100% to 20%.Technical data- Housing: seawater resistant- Anodized aluminum.- Front Glass: mineral glass chemically cured- Depth: more than 200 m- Dimmable: Continuous 100% - 20%- Switches: Mechanical- Battery life: 7.4 V / 4.6 Ah (Li-Ion)- Discharge protection: yes- Charging time: max. 2.5 hoursLED Module: MC-E 10W- ± 10% burn time: 120 minutes at 100%- Burn time dimmed: 20% = ~ 480 min- Light angle: 12 ° Spot / 70 ° Flood- Luminosity: 18 000 Lux Spot- Flood 900 lux- Dimensions ø x L: 64 mm x 191 mm- Weight: 930 gThe Module LED flood for Select 620 comes as standard output 6500K (Cold White), but can be specified as 5000k output (Neutral white/Daylight) and also has the option of a Cree MT-G Easy White LED giving 3000k warm white output equivalent to halogen lamps. please email us for more information about delivery times for non standard light outputs.

Kowalski Select Led 620 Li-ion Blue

Kowalski Select Led 620 Li-ion Blue. The new 620 Select LED gives you ultimate flexibility in a diving lamp. It has the option of three interchangeable heads to go on one power source. This torch also boasts the usual Kowalski build quality along with Lithium Ionen batteries that give an impressive 2 hours burn time @ 100% and a recharge time of only 2.5hrs max. All this in a torch that weighs under 1 kilo.The lamp comes as standard with an LED head of your choice, either a 12° spot version or the 70° flood version. You can then add different heads to suit your lighting needs or preferences.Three individual modules are available that can be exchanged within a few seconds: LED 12 ° Spot, LED Flood 70 ° or 10 ° 6V/20W halogen spot. The select 620 is equipped with all modules infinitely dimmable from 100% to 20%.Technical data- Housing: seawater resistant- Anodized aluminum.- Front Glass: mineral glass chemically cured- Depth: more than 200 m- Dimmable: Continuous 100% - 20%- Switches: Mechanical- Battery life: 7.4 V / 4.6 Ah (Li-Ion)- Discharge protection: yes- Charging time: max. 2.5 hoursLED Module: MC-E 10W- ± 10% burn time: 120 minutes at 100%- Burn time dimmed: 20% = ~ 480 min- Light angle: 12 ° Spot / 70 ° Flood- Luminosity: 18 000 Lux Spot- Flood 900 lux- Dimensions ø x L: 64 mm x 191 mm- Weight: 930 gThe Module LED flood for Select 620 comes as standard output 6500K (Cold White), but can be specified as 5000k output (Neutral white/Daylight) and also has the option of a Cree MT-G Easy White LED giving 3000k warm white output equivalent to halogen lamps. please email us for more information about delivery times for non standard light outputs.