Cressi Slings Per Roll S-45 Green

Cressi Slings Per Roll S-45 Green. Slings per meter S45.

18mm diameter

15 meters

Cressi Rivets

Cressi Rivets. - Kit rivets.- 10 units.

Cressi Free Frog

Cressi Free Frog. A fin derived from the Cressi deep diving models, which also introduces the full foot fin sector of normal length, the use of more reactive materials.

The blade is not in fact made of polypropylene copolymer but from exceptionally light and responsive.

This material is combined with a comfortable thermo-rubber (elastomer), used for the foot to the side stringers and for various inserts, excluding specific models for deep diving is an excellent choice for snorkeling, diving and diving with Ara .

Cressi Ellipse Black Balanced Nr - Mc9 Sc Yoke

Cressi Ellipse Black Balanced Nr - Mc9 Sc Yoke. Pairing of balanced and adjustable 2nd stage Ellipse Balanced with the hyper-balanced 1st stage MC9- SC.Thanks to the performance and the highly technological content of both stages this regulator is placed at the very top of the Cressi range.The user can adjust both the inhalation effort and the Venturi effect (dive / pre-dive) at any time during the dive.The 1st stage MC9 - SC is identical to model MC9, but with a special Seal Chamber which completely isolates the diaphragm and spring from contact with water. Ideal for diving in waters that are rich in suspension and mineral salts, for archaeological work, for potholing and diving in cold waters.Technical Features:2nd stage Ellipse Balanced:- Many of the exclusive technical characteristics of Ellipse, covered by 4 international patents, have been transferred to this new second stage.- Ellipse Balanced has a slightly larger casing which is made from a sound absorbing material, and a new diaphragm that further improves the already very low inhalation effort of Ellipse.- The weight is very low (the lightest in the category).- The pneumatic balancing system of the piston allows for constant performance at any depth and with any air pressure in the tanks.- An easy grip knob allows for the instant adjustment of the inhalation effort, even when wearing gloves, thus regulating it as first regulator or as spare regulator depending on the preferences of the user and the required use.- The regulation system is protected by a double seal and is fully protected from contact with water, thus maintaining smooth rotation even over time.- A small lever, located in the upper part of the casing, acts as a flow deviator and allows the Venturi effect to be adjusted. - When placed in position (-) it functions as pre-dive, for getting into the water and the first stages of the dive, whilst when moved to (+) it allows the regulator to develop its maximum performance.- An internal heat exchanger optimises the performance of the regulator even in cold waters. - The special study of air flows inside the casing has meant that absolutely natural, smooth and very silent breathing has been obtained.- The standard release baffle can be directly replaced by the user for a larger model, which pushes the bubbles further way from the diver’s face.- The possibility of quickly removing the entire mechanical part from the casing significantly aids maintenance operations. Technical Characteristics of the 2nd stage Ellipse Balanced with 1st stage MC9-SC:- Average inhalation effort: 3 mbar.- Average exhalation effort: 8 mbar.- Average breathing labour: 0.75 J/l.- Quantity of air supplied: 2500 l/m (*).- Weight without hose 170 g.(*) Values measured in compliance with standard UNI EN 250. 1st stage MC9-SC:- Hyper-balanced Diaphragm 1st stage with highly technological content that places it at the top of the Cressi range. - Very light body covered by a protective elastomer shell.- Cylinder sheathed in an antifriction and anticorrosion material that guarantees perfect sliding of the piston and long maintenance intervals.- The nozzle, made from 316 stainless steel, can be easily replaced, thus ensuring perfect air-tightness, even after many years of use.- Advanced research on the passage of internal air and a special assistance chamber have enabled the drop of pressure upon inhalation to be kept to a minimum, thus guaranteeing high performance in any situation. - Hyper-balancing allows for an increase of the intermediate pressure at maximum depths and lowering of the pressure in the tank, offering higher performance during the delicate ascent phase and at maximum depths. MC9 SC diaphragm 1st stage - Technical Features:- Working pressure (INT connection): 0-232 bar.- Calibration pressure: 10 bar.- Calibration adjustment range: +/- 0.5 bar.- Air supply: 4500 l/min (*).- High pressure seats (HP): 2.- Low pressure seats (LP): 4.- Weight with INT connection: 650 g.(*)values measured at LP seat outlet with second stage connected and 150 bar pressure in the cylinders.

Cressi Ellipse Black Balanced Nr - Mc9 Yoke

Cressi Ellipse Black Balanced Nr - Mc9 Yoke. Pairing of balanced and adjustable 2nd stage Ellipse Balanced with the hyper-balanced 1st stage MC9.

Thanks to the performance and the highly technological content of both stages this regulator is placed at the very top of the Cressi range.

The user can adjust the Venturi effect (dive / pre-dive) at any time during the dive.


Technical Features:

2nd stage Ellipse Balanced:

- Many of the exclusive technical characteristics of Ellipse, covered by 4 international patents, have been transferred to this new second stage.

- Ellipse Balanced has a slightly larger casing which is made from a sound absorbing material, and a new diaphragm that further improves the already very low inhalation effort of Ellipse.

- The weight is very low (the lightest in the category).

- The pneumatic balancing system of the piston allows for constant performance at any depth and with any air pressure in the tanks.

- A small lever, located in the upper part of the casing, acts as a flow deviator and allows the Venturi effect to be adjusted. When placed in position (-) it functions as pre-dive, for getting into the water and the first stages of the dive, whilst when moved to (+) it allows the regulator to develop its maximum performance.

- An internal heat exchanger optimises the performance of the regulator even in cold waters.

- The special study of air flows inside the casing has meant that absolutely natural, smooth and very silent breathing has been obtained.

- The standard release baffle can be directly replaced by the user for a larger model which pushes the bubbles further way from the diver-s face.

- The possibility of quickly removing the entire mechanical part from the casing significantly aids maintenance operations.


Technical Characteristics of the 2nd stage Ellipse Balanced with 1st stage MC9:

- Average inhalation effort 3 mbar.

- Average exhalation effort 8 mbar.

- Average breathing labour 0.75 J/l.

- Quantity of air supplied 2500 l/m (*).

- Weight without hose 170 g.

(*) Values measured in compliance with standard UNI EN 250.


1st stage MC9:

- Hyper-balanced Diaphragm 1st stage with highly technological content that places it at the top of the Cressi range.

- Very light body covered by a protective elastomer shell.

- Cylinder sheathed in an antifriction and anticorrosion material that guarantees perfect sliding of the piston and long maintenance intervals.

- The nozzle, made from 316 stainless steel, can be easily replaced, thus ensuring perfect air-tightness, even after many years of use.

- Advanced research on the passage of internal air and a special assistance chamber have enabled the drop of pressure upon inhalation to be kept to a minimum, thus guaranteeing high performance in any situation.

- Hyper-balancing allows for an increase of the intermediate pressure at maximum depths and lowering of the pressure in the tank, offering higher performance during the delicate ascent phase and at maximum depths.


MC9 diaphragm 1st stage - Technical Features

- Working pressure (INT connection): 0-232 bar.

- Calibration pressure: 10 bar.

- Calibration adjustment range: +/- 0.5 bar.

- Air supply: 4500 l/min (*).

- High pressure seats (HP): 2.

- Low pressure seats (LP): 4.

- Wight with INT connection: 590 g.

(*)values measured at LP seat outlet with second stage connected and 150 bar pressure in the cylinders.

Cressi S 2011

Cressi S 2011. The most beloved and popular jacket of the top bracket. In this jacket, the bag has been freed up from the harness and has considerable volume and subsequent buoyancy, which make it perfectly suitable for professional use as well as for heavier uses.

The S 2011 is a unique product that combines the performance features of semi-back inflation with the comfort of an adjustable BCD.

A fully weight integrated BCD, the S 2011 incorporates a self-expanding gusseted bladder that offers increased buoyancy around the tank, allowing for proper buoyancy control while swimming.

Cressi-sub-s unique C-Trim Weight System is utilized allowing for proper weight distribution along with easy weight ejection.


Features:

The choice of materials, a new Colour Lock 500 denier Cordura and 420 denier nylon, reflects the current trend to make very strong but not too heavy BCs.

The conformation of the bag has been designed to offer extremely high comfort. The shoulder straps have a 20 mm increase of distance between them and the entire front part of the BC has a lowered profile, thus giving the arms the greatest freedom of movement. The shoulder straps are also separate from the bag, and are attached not to the bag but directly to the backpack and boast the new feature of being adjustable in length, so that they adapt perfectly to the physique of people even very different from each other.

The pockets are very large and come complete with gusset opening, suited to storing bulky objects.

The C-Trim System weight pockets, are shaped from the rear of the main pocket, so they do not stick out at the sides, thus offering an excellent hydrodynamic profile.

The weights are inserted into special large, removable pockets, which can hold up to 5 kg of weight each.

They now sit further to the front and are inclined so as to guarantee perfect balance and make it easier to remove the weight.

There is an extensive Velcro zone to attach the specific pockets to the jacket, helped by a YKK hi-tech polymer button.

Some 4 weight pockets have been shaped from the back of the jacket, closed by Fastex buckles, to stow another 4 kg of weight.

So, the jacket can thus stow a total of up to 14 kg of weight, thereby catering for the needs of those divers who prefer to completely entrust their weighting to the jacket, even when they carry a lot of weight, imposed by the use of some dry suits.

The backpack is completely new, anatomic, light and very hard-wearing.

The rear part incorporates an elastomer non-slip element, for perfect grip of the tank, assisted in this operation by a second adjustable strap, to be placed round the neck of the tank or on the valves.

The upper inner side has a strong carry handle for the unit. The backpack and the inside of the pockets are padded with Softflex, a soft and light material that guarantees great comfort.

The waist strap is separate from the bag and is surmounted by a dual adjustment strap.

It allows a natural -fold out- opening of the BC (Freematic System) when there is a large amount of air, thus preventing any compression and squeezing sensation to the divers body at all.

The waist strap is made in two separate pieces, is adjustable and also stretches, like the shoulder straps above it, to automatically absorb squeezing of the suit and the abdominal area of the body during the dive.

There are 3 dump/pressure valves: one is situated on the upper extremity of the hose, a second one on the right shoulder, controlled by a small tubed line and a third one fitted to the bottom, right rear.

The particularly plentiful accessories include two, 50 mm stainless steel rings on each shoulder, two applied to the bottom edge of the BC and two, 30 mm rings attached above the pockets.


Technical features:

- Bag with large volume of air, freed from the harnessing.

- Lower adjustable stretch strap.

- Length adjustable stretch waistband, separate from bag.

- Stretch waistband.

- Rings to tighten and loosen the waist strap during dives.

- Shoulder straps separate from bag and length adjustable.

- Backpack and inner side pockets padded with Softflex.

- Stretch and adjustable chest harness.

- 3 Deflation and pressure relief valves.

- 2 large zip-up gusset accessories pockets.

- 2 C-Trim System weight pockets with removable bags (each one holds 5 kg).

- 4 rear weight pockets, with Fastex closing.

- Four 50-mm D-rings (angled) on the shoulders, two 50-mm D-rings on the bottom side, two 30-mm D-rings on the front (all made from satin-polished stainless steel).

- Material: Colour Lock 500 denier Cordura and 420 denier nylon.

- Buoyancy in Newton: 85 (XS), 130 (S), 200 (M), 220 (L), 230 (XL).

- Buoyancy in kg: 8.7 (XS), 13.3 (S), 20.4 (M), 22.4 (L), 23.5 (XL) (*).

- Buoyancy in Pounds: 19.1 (XS), 29.2 (S), 45.0 (M), 49.5 (L), 51.7 (XL).

- Weight in kg: 3.450 (XS), 3.550 (S), 3.850 (M), 3.950 (L), 4.000 (XL).

Cressi Air Travel Lady

Cressi Air Travel Lady. Techniques Features:

- 420 denier nylon.

-1 largue accesory pocket.

- 40 mm buckles in ligut alloy.

- Paddel back panel.

- 3 relief valves.

- Fast system for folding and compacting the BC.

- Weight: 2,1 kg.

Cressi Start Pro

Cressi Start Pro. Designed primarily as a rental BC for resorts and dive schools, the Start Pro gives students and customers the stability of a jacket style BC and the convenience of weight integration.Diver operators will appreciate its bullet-proof construction using 1000 and 500 Denier Cordura and large, easily seen size markings on the shoulder.Features:- Cordura 500 and 1000 Deniers.- External weight pockets with quick unhooking feature and safety buckle.- 2 large pockets with velcro closure.- Rigid padded back.- 3 air- exhaust valves.- 2 tecnopolimero rings for accesories.- 2 spring- clip holding rings.- Size printedon the harness.- Hose included