Cressi Kit Rondinella

Cressi Kit Rondinella. A modern bag with Rondinella fins, Onda mask and Gringo snorkel.

Cressi Dry

Cressi Dry. The Dry snorkel has a unique splash guard at the end which greatly reduces the entrance of water during use on the surface.The end part has a corrugated piece that is smooth on the inner side and keeps the snorkel away from the mouth during use when scuba diving. A special water collection well, with a large elliptic valve, allows quick and easy expulsion of water.Technical characteristics•New design for the splash guard end-piece•Ergonomical shape for maximum comfort•Mouthpiece and corrugated piece in hypoallergenic silicone•Drainage well for quick and easy emptying

Cressi Nuoto Float

Cressi Nuoto Float. This kick board is shaped so as to offer minimum resistance to moving forward.

It can be grasped both on the front and on the two ends.

Cressi Micro Frogman

Cressi Micro Frogman. Underwater Lamp Cressi Microfrogman

Magnetic switch

Max depth 60m

50 hr duration

Weight 232 g

Lenght 13 cm

Lumens: 75

Cressi Hercules Lifting Buoy

Cressi Hercules Lifting Buoy. Lifting buoy with valve.Lifting capacity 250, 500 or 1000 Kg

Cressi Supertotem

Cressi Supertotem. An inexpensive, average-size knife with an excellent quality-price ratio. One side of the stainless steel blade is straight-edged, the other one is serrated right along the blade; they are both very sharp and effective for line cutting. The anatomic grip is made from technopolymers and has a series of moulds for the fingers, ending with a thumb protection tab at the blade end. The plastic sheath holds the knife firmly with a traditional elastic band and has loops to attach it to the leg or strap. The knife comes with two, standard issue straps to attach it to your leg. Technical features •Total length: 232 mm •Blade length: 124 mm •Blade width: 30 mm •Blade thickness: 3 mm •Weight, knife only: 120 g •Weight with sheath and straps: 210 g •Water buoyancy: negative

Cressi Facile Hf Ultraspan 7mm Mono

Cressi Facile Hf Ultraspan 7mm Mono. This is a new version of the Facile wetsuit, made entirely from 7 mm Ultraspan neoprene which is exceptionally supple and soft, lined with Helioflex, a material that has excellent thermal characteristics.

Facile HF is a wetsuit that has special features that limit water infiltrations as much as possible and therefore make it suitable for diving in tepid and cold waters.

It includes an all-in-one with incorporated hood and a sleeveless vest that can be purchased separately.

To limit the infiltration of water through the main zip (which stretches from the waist to the right cheek) the unique WSS (Water Stop System) has been used, this foresees a 3 mm neoprene bib, bonded to the inside of the suit at the main zip. The tiny amount of water that actually manages to penetrate the zip does not reach the diver-s body but collects between the internal surface of the all-in-one and this bib, which has its own zip that is not aligned with the main zip (making it easy to put on and take off).

Therefore, this all-in-one is warmer than any other similar wetsuit on the market.

The thickness is differentiated: 7 mm for the maximum protection in all the vital areas and 5 mm on the arms, calves, knees and hood, to increase freedom of movement.

The incorporated hood, which prevents those annoying infiltrations of water at the neck, has an Airfree valve to automatically release stale air.

The seals at the wrists and the ankles are double cuffed (3 mm outside + 2 mm single-lined inside). Therefore, gloves and boots are lodged, like in a neoprene -sandwich-, between the cuff and the main garment, guaranteeing a practically watertight seal.

In the event of particularly cold water, the special jacket in 5 mm double lined neoprene can be worn over the all-in-one.

This is sleeveless so that it does not inhibit movement. To avoid annoying overlaying of zips and possible infiltrations of water, the zip of the jacket has been positioned at the back.


Who it is for

The all-in-one is ideal for average water temperatures.

When worn with the jacket this is a very warm wetsuit and is suitable for the coldest waters as it offers, in the chest area, 15 mm of neoprene at the front and 12 mm at the back. Its remarkable thickness makes this wetsuit ideal even in very deep water where its thermal performance exceeds that of semi-dry suits.



Technical features

-This is a modular wetsuit that includes an all-in-one with incorporated hood and jacket, which can be purchased separately
-The all-in-one is made from 7 mm double lined Ultraspan neoprene, with inner lining in Helioflex
-Anatomical cut with pre-shaped arms and legs
-YKK front zip from waist to cheek with special WSS infiltration system
-Anti-wear reinforcements on the elbows and knees
-Wrists and ankles have zips and are made from double material (3 mm Ultraspan + cuff in 2 mm Metallite)