Cressi Second Stage Ellipse Steel

Cressi Second Stage Ellipse Steel. Balanced and adjustable 2nd stage Ellipse Balanced, steel version

Thanks to the performance and the highly technological content this regulator is placed at the very top of the Cressi range.

The user can adjust both the inhalation effort and the Venturi effect (dive / pre-dive) at any time during the dive.

2nd stage Ellipse Balanced

Many of the exclusive technical characteristics of Ellipse, covered by 4 international patents, have been transferred to this new second stage.

Ellipse Balanced has a slightly larger casing which is made from a sound absorbing material, and a new diaphragm that further improves the already very low inhalation effort of Ellipse.

The pneumatic balancing system of the piston allows for constant performance at any depth and with any air pressure in the tanks.

An easy grip knob allows for the instant adjustment of the inhalation effort, even when wearing gloves, thus regulating it as first regulator or as spare regulator depending on the preferences of the user and the required use.

The regulation system is protected by a double seal and is fully protected from contact with water, thus maintaining smooth rotation even over time.

A small lever, located in the upper part of the casing, acts as a flow deviator and allows the Venturi effect to be adjusted. When placed in position (-) it functions as pre-dive, for getting into the water and the first stages of the dive, whilst when moved to (+) it allows the regulator to develop its maximum performance.

An internal heat exchanger optimises the performance of the regulator even in cold waters.

The special study of air flows inside the casing has meant that absolutely natural, smooth and very silent breathing has been obtained.

The standard release baffle can be directly replaced by the user for a larger model which pushes the bubbles further way from the diver-s face.

The possibility of quickly removing the entire mechanical part from the casing significantly aids maintenance operations.

Cressi Second Stage Ellipse Balanced

Cressi Second Stage Ellipse Balanced. 2nd stage Ellipse BalancedMany of the exclusive technical characteristics of Ellipse, covered by 4 international patents, have been transferred to this new second stage.Ellipse Balanced has a slightly larger casing which is made from a sound absorbing material, and a new diaphragm that further improves the already very low inhalation effort of Ellipse.The weight is very low (the lightest in the category).The pneumatic balancing system of the piston allows for constant performance at any depth and with any air pressure in the tanks.An easy grip knob allows for the instant adjustment of the inhalation effort, even when wearing gloves, thus regulating it as first regulator or as spare regulator depending on the preferences of the user and the required use.The regulation system is protected by a double seal and is fully protected from contact with water, thus maintaining smooth rotation even over time.A small lever, located in the upper part of the casing, acts as a flow deviator and allows the Venturi effect to be adjusted. When placed in position (-) it functions as pre-dive, for getting into the water and the first stages of the dive, whilst when moved to (+) it allows the regulator to develop its maximum performance.An internal heat exchanger optimises the performance of the regulator even in cold waters. The special study of air flows inside the casing has meant that absolutely natural, smooth and very silent breathing has been obtained.The standard release baffle can be directly replaced by the user for a larger model, supplied as standard, which pushes the bubbles further way from the diver’s face.The possibility of quickly removing the entire mechanical part from the casing significantly aids maintenance operations. Technical Characteristics of the 2nd stage Ellipse Balanced• Average inhalation effort: 3 mbar• Average exhalation effort: 8 mbar• Average breathing labour: 0.75 J/l• Quantity of air supplied: 2500 l/m (*)• Weight without hose 170 g(*) Values measured in compliance with standard UNI EN 250.

Cressi Aquapro 5r

Cressi Aquapro 5r. A new version of one of Cressi’s classic pieces that has seen a complete revision of aesthetics and some of the functional characteristics.Provided with a complete, practical range of accessories it is offered at a decidedly low price, making it a favourite with a great number of divers who appreciate the unbeatable price-quality ratio. Aquapro 5 has special “gravity” weight pockets applied to the outside of the main pockets. These can easily hold up to 3 kg of lead per pocket. Their wraparound closure allows easy storage of weights, even during dives. Opening and closing are guaranteed by large Fastex buckles.The bellows type accessory pockets have zip fastenings.The back panel is rigid, anatomic, light and very strong. The rear part has a non-slip element in elastomer that firmly holds the air tank, aided by a second adjustable harness to be fixed around the collar of the tank or to the taps. Inside the upper part there is a strong handle for carrying the unit and the back is fully lined with thick padding. The chosen material is a 420 denier nylon fabric which is light yet strong, paired with a special self-draining mesh fabric and rubbery inserts with a strong grip.The ventral strip, which is separate from the bag and is topped by a harness with double adjustment, allows the buoyancy jacket to open naturally like a concertina (Freematic system) when the quantity of air introduced is significant, thus avoiding any compression or sense of pressure on the diver’s body.Technical characteristics•Material: 420 denier nylon and self-draining mesh fabric•2 external wraparound weight pockets•2 large accessory pockets with zip fastening•Rigid, fully padded back support panel•Ventral strap that is separate from the bag•Chest harnessing•3 relief and overpressure valves (the rear valve has the control at the front)•2 50 mm stainless steel D rings on the shoulder straps•2 50 mm engineering plastic D rings on the lower edge of the buoyancy jacket•2 snap hook rings•Buoyancy in Newtons: 60 (XXS), 75 (XS), 90 (S), 105 (M), 150 (L), 160 (XL)•Buoyancy in kg: 6.1 (XXS), 7.7 (XS), 9.2 (S), 10.7 (M), 15.3 (L), 16.3 (XL)•Weight in kg: 2.50 (XXS), 2.550 (XS), 2.650 (S), 2.850 (M), 2.900 (L), 3.000 (XL)

Cressi Capsule Compass

Cressi Capsule Compass. The Cressi compass is a modern instrument that enables easy reading in all conditions.

The magnetic plate moves extensively in all directions, so that reading is accurate even if the instrument is not held perfectly level.

The face is luminous and divided into 10° intervals.

Reading can take place by looking at the instrument from above or, more easily, through a special reading window that enables more precise tracking of the compass.

On the top there is a red lubber-s line.

A swivel trigger lunette with a double pointer means the direction can be memorized.

Technical features

-Material: thermoplastic substances
-Luminous face
-Face divided into sectors every 10°
-Side reading window
-Swivel trigger lunette with double references and compass rose
-Lubber-s line
-Diameter: 60 mm
-Height of instrument: 29 mm
-Weight: 92 g

Cressi Gara Professional Ld

Cressi Gara Professional Ld. Following the great success of the Gara Professional, Cressi has also thought of those who wish to benefit from all the winning characteristics of the Gara Professional, without having the muscles of an athlete that is trained to full capacity. The blade is made from a special elastomer polypropylene which gives a longer lasting, more fluid, softer kick that is less demanding, making it ideal for covering long distances.The use of this new engineering plastic is less reactive and nervous than the Compoflex used in the Gara Professional. It guarantees progressive and well controlled blade flexibility which gives an extremely fluid kick. Together with the exceptional lightness and no dispersion of effort, the kick is more effective and pleasant than ever.Like the other Gara fins (2000 HP – 3000 LD – Gara Professional) in the Cressi range, the Gara Professional LD also boasts an industrial production process that guarantees very high standards of precision and response to strict technical parameters that are impossible to obtain with traditional craftsmens techniques.The new shoe pocket on the Gara Professional LD has been designed so that it is positioned under the actual blade. This characteristic, together with a perfect union between blade and foot, contributes to reducing effort and energy dispersion as much as possible during the kick.The anatomy of the foot pocket has been re-designed and, if possible, further improved compared to the already much appreciated shoe pockets of the Cressi Gara. The use of a new, particularly soft elastomer further increases comfort. Who they are for The new Gara Professional LD are for all those divers who wish to benefit from the extraordinary performance of Cressi long fins, without, on the other hand, having to use too much muscular effort. For those divers who have not undergone excessive training, the ideal effort-productivity ratio can offer even higher performance than when using the more rigid and reactive Gara Professional. Perfect for long kicks and for cold water, but also ideal for use with breathing apparatus, where their exceptional propulsion qualities will astound.

Cressi Palau Classic Saf

Cressi Palau Classic Saf. This has the same characteristics as the Palau Classic model but has a smaller blade.

It is the ideal fin for swimming, training and all kinds of water sports.

Cressi Piuma Evo Crystal

Cressi Piuma Evo Crystal. A new version of the Piuma, made using new, extraordinary, Crystal Clear silicone.This material offers a level of transparency that has never been seen before in the production of scuba diving masks.Although it still maintains the hypo-allergenic characteristics of the silicones used previously, Crystal Clear is so transparent that it is virtually invisible once the mask has been put on. In addition to the extraordinary transparency, this silicone boasts exceptional resistance to ageing and yellowing over time that is far greater than that of traditional silicones. Even the tendency to mist up is lower than with traditional silicone materials.The seal on the skirt has an original angle and offers comfort that has been unheard of up until now on a scuba diving mask, even after prolonged use.The special two-tone headband is made with a double injection system that allows a flexible elastomer element to be integrated into the structure.The buckles, that tilt sideways, are incorporated into the headband structure and, thanks to the elastomer element, are indestructible, even if completely flattened.The strap can be adjusted quickly and precisely, even when wearing thick protective gloves.The internal volume of the Piuma is sensibly reduced. Who it is forPiuma, thanks to its wide field of vision, exceptional transparency and comfortable skirt, is the perfect mask for swimming, snorkelling and scuba diving. The minimum internal volume allows it to be used for free diving too.Technical characteristics•Original and extremely transparent Crystal Clear Silicone (Cressi exclusive)•Single raked glass (Cressi patent) for an incredible field of vision•The special differentiated skirt structure allows it to fit comfortably to the face and seal perfectly.•Very narrow headband that is invisible when the mask is put on.•Instantly adjustable buckles attached to the headband via a flexible and indestructible element.•Minimum internal volume•The wide strap has a large surface area to rest on the back of the head