Scubapro Mk2 Plus R295 Nitrox M26

Scubapro Mk2 Plus R295 Nitrox M26. MK2PLUS AND THE R-SERIES IN NITROXClassic downstream piston coupled with classic downstream second stages with modern fresh looks: this means reliability, durability and easy care, the systems of choice for training centres as well as new divers. Diving centres will appreciate R295-s fixed VIVA and left and right hose attachments for total flexibility of use. MK2PLUS R295 NITROX REGULATOR SYSTEMThe Workhorse. Simple Reliability best describes this combination offered in a very compact design that remains unmatched in todays market. Nitrox (oxygen enriched air) is the term used to describe breathing gases made of oxygen-nitrogen mixes with the oxygen percentage higher than 21% (air). SCUBAPRO introduces two fully dedicated Nitrox systems (MK25 S555 Nitrox & MK2 R295 Nitrox) based on our piston first stages and developed in compliance with the most stringent safety norms on breathing apparatusesMK2 PLUS NITROXMK2PLUS first stage in a Nitrox compatible configuration satisfies both advanced and recreational divers within the EU.·Owning a SCUBAPRO dedicated Nitrox regulator means you can safely dive using oxygen enriched air with over 21% and up to 100% oxygen concentration at a maximum working pressure of 200bar, in full compliance with EU norms EN 13949:2004 & EN 144-3:2004 for breathing devices. ·SCUBAPRO Nitrox dedicated first stages have specifically designed connections for Nitrox tank valves, which differ from the connections for compressed air tanks. This ensures utmost safety and no risk contaminating Nitrox with potentially hazardous hydrocarbons or residues. ·Our Nitrox systems only use approved and specific oxygen compatible components (HP seat, O-rings, washers and grease) required for high pressure oxygen systems for guaranteed safe diving. ·SCUBAPRO Nitrox regulators are assembled in a dedicated environment with the required level of cleanliness for oxygen compatibility. ·Nitrox regulator systems are easily identifiable with green & yellow color accents. ·WARNING: You must be fully trained and certified by a recognized diving training agency in order to dive with oxygen enriched air (Nitrox breathing mixtures). Diving with Nitrox without such certification could lead to death or serious injury. ·WARNING: if a Nitrox dedicated SCUBAPRO regulator has been used with standard compressed air from a non-filtered source it is then compulsory to perform a new maintenance and conform with the cleaning procedure specifically designed for the use of Nitrox mixes and carried out by an authorised technician, before using them again with Nitrox. R295 NitroxR295 NITROX SECOND STAGE·Classic downstream valve. Classic downstream valves areparticularly noted for their legendary safety and reliability. When in use,the downstream valve opens in the same direction as the incomingair flow. To close the valve and stop the air flow, a spring counteractsthe force of the incoming air. Therefore, a certain inhalation effort isalways required to overcome the spring tension and open the valve. ·Fixed VIVA (Venturi Initiated Vacuum Assist) flow vane. Fixed in the pre-tuned ideal position for safe and uncomplicated use. ·Extremely lightweight and compact. Comfortable for all divers, including junior divers newly initiated in the sport. · Orthodontic mouthpiece. SCUBAPRO uses a comfortable orthodonticmouthpiece on every second stage to reduce jaw fatigue and gum irritation.It was developed by dentists and dental laboratories and lasts longer than any other mouthpiece, because only a minimum effort is needed to hold it comfortably in place. ·Nitrox compatible configurations satisfy both advanced and recreational divers. Owning a SCUBAPRO dedicated Nitrox regulator means you can safely dive using oxygen enriched air with over 21% and up to 100% oxygen concentration at a maximum working pressure of 200bar, in full compliance with EU norms EN 13949:2004 & EN 144-3:2004 for breathing devices. ·SCUBAPRO Nitrox dedicated first stages have specifically designed connections for Nitrox tank valves, which differ from the connections for compressed air tanks. This ensures utmost safety and no risk contaminating Nitrox with potentially hazardous hydrocarbons orresidues. ·Our Nitrox systems only use approved and specific oxygen compatible components (HP seat, O-rings, washers and grease) required for high pressure oxygen systems for guaranteed safe diving. SCUBAPRO Nitrox regulators are assembled in a dedicated environment with the required level of cleanliness for oxygencompatibility. ·Nitrox regulator systems are easily identifiable with green & yellow color accents.·WARNING: You must be fully trained and certified by a recognized diving training agency in order to dive with oxygen enriched air (Nitrox breathing mixtures). Diving with Nitrox without such certification could lead to death or serious injury. ·WARNING: if a Nitrox dedicated SCUBAPRO regulator has been used with standard compressed air it is then compulsory to perform a new maintenance and comply with the cleaning procedure specifically designed for the use of Nitrox mixes and carried out by an authorized technician, before using them again with Nitrox.MK2 PLUS NITROXAir balanced flow-through piston: NoClassic downstream piston: YesBalanced diaphragm: NoChrome plated brass body: YesFull titanium body: NoAnti-freeze protection: NoDry chamber: NoNitrox compatible up to 100% oxygen concentration: NoLow pressure (LP) ports: 4High pressure (HP) ports: 1Swivelling turret with LP ports: NoINT 232bar: NoDIN 232bar: NoDIN 300bar: YesDedicated Nitrox EN144-3 DIN 232bar: YesExternally adjustable intermediate pressure: NoR295 NitroxAir balanced valve technology: NoClassic downstream valve: YesPrecision molded carbon fiber and technopolymer housing : YesTitanium components: NoNitrox compatible up to 100% oxygen concentration: YesDivers adjustable inhalation effort: NoDivers adjustable VIVA (Venturi Initiated Vacuum Assist): NoPre-tuned system: YesSturdy super-flow hose with kevlar lining for extra durability and flawless air delivery: YesHigh comfort orthodontic mouth piece: YesSuper high flow: NoHigh flow: YesLeft and right attachment for extra convenience: Yes

Scubapro G250v Second Stage

Scubapro G250v Second Stage. The human breathing process is unique and individual, rather intuitive, and taken for granted at the surface. However, once underwater and dependent on a regulator, we suddenly realize how personal and unique breathing behaviors are and how important a regulator can be. The harsher the diving conditions, the higher the flexibility and response we demand from a second stage regulator. This is why at SCUBAPRO we have implemented diver adjustable functions on many of our regulators
The SCUBAPRO G-Series is embodied in the G250 Vintage, a timeless classic which stands for unfailing performance and ultimate reliability. The choice for demanding divers.

SECOND STAGE REGULATORS
A second stage regulator must translate natural breathing behaviour into mechanical reality. A high quality second stage can significantly reduce stress and enhance diver safety by providing smooth, low-effort breathing response, resulting in ample yet controllable quantities of air.
The designation balanced and classic downstream are also distinguishing marks for second stages and again imply ultimate flow performance and stability in addition to reliability, simplicity and solid performance.

SCUBAPRO introduces the G250V: Back and Better than Ever!
Our renowned G250 balanced adjustable 2nd stage is back and better than ever, redesigned as a Vintage version with tons of technical improvements.

· G250V has improved the breathing performance by 50%. Working inhalation & exhalation are easier and stress free. Comparing the G250HP which required 1,29 Joules/Ltr with the new G250V requiring 0,68 J/Ltr means you spend less energy to breathe the same volume of air.

· G250V is a full metal system- composed of a full metal inlet tube, metal orifice, metal knob plus a metal hose connector/heat exchanger. Serious construction for serious divers plus high cold-water resistance.

· New self contained cover concept- reminiscent of the classic G250, but much stronger for years of trouble-free diving. Also easily dismountable even underwater, thanks to the new no-locking pin system. Keeps you in control, no matter what type of diving you enjoy.

· New VIVA knob- for easier Venturi Adjustment, even with thick gloves.

· G250V systems- like all of our regulator systems, are protected by individual serialization & a Limited Lifetime Warranty.


Air balanced valve technology:Yes

Classic downstream valve:No

Precision molded carbon fiber and technopolymer housing :Yes

Titanium components:No

Nitrox compatible up to 100% oxygen concentration:No

Divers adjustable inhalation effort:Yes

Divers adjustable VIVA (Venturi Initiated Vacuum Assist):Yes

Pre-tuned system:No

Sturdy super-flow hose with kevlar lining for extra durability and flawless air delivery:Yes

High comfort orthodontic mouth piece:Yes

Super high flow:No

High flow:Yes

Left and right attachment for extra convenience:No

Scubapro T-black

Scubapro T-black. Finding the perfect balance. Thats what we are all after anyway. Our buoyancy compensators have been designed using innovative technology for better control & flexibility, resulting in safer, more robust and high-comfort stability. SCUBAPRO BCs facilitate precise changes in your underwater body position for a premium diving experience. Balance means you are at ease in any situation, effortlessly enjoying the amazing underwater world around you.

T-Black has been engineered to offer diving excellence on demand. This streamlined styled front-adjustable BC features a customised lift system on a semi-back flotation jacket along with sophisticated technology for versatility. Enhanced with innovative comfort and safety features, T-Black is for advanced & technical diving excellence on demand.

·AirFlex adjustable back buoyancy system enabling more lift & quick deflation combined with large capacity front adjustable bladder for added stability. Outstanding buoyancy control.

·Hydro-dynamic cut & special hi-grip foam paddding applied to cummerbund & shoulder interior, hugging you better for a perfect fit.

·T-Comfort broad shaped backpack with thick design padding for all diver types, yet light & easy to use, imperative for maximum comfort.

·Extra-flexible side pockets for expandable accessory storage & large teeth zippers for sturdier wear.

·Additional compartment on the right pocket for safety buoy or valuable devices.

·Patented quick-release weight system for extra safety & convenience.

·Expandable back flotation pockets for trim weight adjustment.

·High performance SCUBAPRO valves & Balanced Power Inflator ensure reliable and easy to operate inflation and deflation for controlled balance.

·Constructed with heavy duty ultra-durable Cordura 1000 on the outside and lightweight nylon 420 on the inside, for a a robust exterior & soft comfy interior.

·Cordura Color-Lock decreases wear from sun & water exposure.

·Carbon reinforced shoulders & pocket flaps, where you need added protection against wear & tear most.

·Heavy duty shoulder strap buckles & 7 stainless steel D-rings for sure versatility & safety.

·One-hand operation steel super-cinch tank band for easy to adjust security.

·Available in 5 sizes XS - XL.

Front-adjustable jackets:

·Front-adjustable jackets allow multiple variations of fit, regardless of the thickness of suit worn.

·Quick release adjustable shoulder buckles make this style BC very easy to put on and take off.

Buoyancy control & safety:

Enabling the diver to react quickly to changing conditions and providing sufficient lift capacity are the necessary elements of a safe jacket.

·Thanks to the new AirFlex Technology System and its high capacity bladder, T-Black provides the highest buoyancy lift of any of our T-line BCs. With its bungee enclosures, AirFlex offers extra stability and allows for quick deflation. All jackets need a minimum internal volume to allow sufficient air to be injected inside to reach neutral buoyancy and, when needed, to create lift for the ascent and flotation on the surface. European Union norms require a minimum lift capacity in relation to the size of the tank used, measured in kilograms. The right lift is a comfort and a safety issue because a jacket also needs to be streamlined to reduce drag in order to save energy when swimming.

·T-Black Lift capacity by size : XS:14kg, S:18kg, M:22kg, L:23.5kg, XL: 27kg.

·U.S. patented quick-release integrated weight system offers more comfort and convenience. Pouches accommodate up to 5kgb each, which is usually sufficient weight for a recreational diver using a wetsuit. They are secured in specially-designed pockets with oversized buckles that prevent weight pouches from falling out during the dive. Weight integrated pockets help to avoid sore hips and backache, usually caused by weight belts and are easy to handle even with thick gloves.

·Two expandable rear trim pockets counterbalance front weights and provide a well-balanced swimming position. Rear trim pockets are located on both sides of the tank and hold 1,5kg of non-releasable weights each. Together with the front weight they optimize diver-s trim and adjust to various equipment requirements and diving conditions.

·3-dump deflation system enables divers to dump air from a variety of underwater positions. Because divers are not always in an upright position when they need to vent air, SCUBAPRO jackets feature several dump valves at different positions: on the right shoulder, equipped with an easy to find lanyard handle on the left shoulder, integrated in the corrugated hose in the rear, at waist level, for a diver in head down position.

·Steel super-cinch tank band for easy adjustment and a secure grip on the tank. No other system offers the strength security and reliability of SCUBAPRO-s proprietary stainless steel cam action buckle system. Engineered to allow both an easy adjustment and a secure grip on the tank.

·Available with Balanced Power Inflator (BPI) or optional AIR2. The compact SCUBAPRO BPI inflates and deflates at the touch of a button, featuring special soft touch, ergonomically shaped buttons for a good grip and easy one hand operation with gloves. A BPI is included on every SCUBAPRO jacket. The single-hosed AIR2 is an integrated balanced power inflator and an alternate air source. Great for travel, it eliminates the need for an additional hose.

Durability:

A robust jacket is highly resistant to punctures and abrasion, and carries heavy load tanks without compromising longevity and comfort. SCUBAPRO achieves this by using the best materials, reinforcements and seam constructions.

·Robust aircell made of heavy duty Cordura 1000 lightweight Nylon 420 interior.

·Cordura Color-Lock creates essential protection against repeated sun and water exposure.

·Pockets and harness are made out of Cordura 500 and Polyester 1200 material with carbon reinforcement.

·High quality seam construction. SCUBAPRO was the first manufacturer to use a high tech method of welding to achieve a flawless seal on all jackets made from polyurethane backed nylon. The use of high power radio waves allows polyurethane material to bond without heat, resulting in a very strong and long-lasting seam.

·Heavy duty shoulder strap buckles.

Comfort & convenience:

A comfortable jacket shifts the heavy tank load evenly to the divers- hip area, away from chest and shoulders and offers soft interior padding. It conforms securely to the diver-s body to minimize drag and provide a nonrestrictive fit around the shoulders and waist.

·T-comfort backpack, broad enough for all diver sizes, includes thick design padding offering maximum comfort.

·Hydro-dynamic cut and hi-grip foam padding for cummerbund and shoulder interior ensure perfect fit and comfort.

·Flexible and expandable pockets for accessory storage do not compromise the streamlined shape.

·Additional external compartment on the right pocket for carrying a safety buoy.

·Seven stainless steel D-rings, 5 large and 2 small, for all your accessories.

·T-Black is available in five sizes: XS to XL.

Size & Lift Capacity:XS-14kg S-18kg M-22kg L-23,5kg XL-27 kg

Type of floatation:Front Adjustable/Semi-Back

Quick release (y/n):Yes

Integrated Weight System (y/n):Yes

Material type:Cordura 1000, Cordura 500, Polyester 1200, Nylon 420

Primary (integrated) & Trim weight capacity:Primary- 5kg each pocket Trim-2,5kg each pocket

Maximum tank capacity:XS: 15L S:18L M:18L L:18L XL:18L

Scubapro Ladyhawk

Scubapro Ladyhawk. A robust and comfortable back flotation jacket that integrates numerous performance features to deliver outstanding comfort and easy handling. Knighthawk and Ladyhawk incorporate an array of features which make them a truly complete package for divers who prefer diving with a totally uncluttered chest area.

This superior women-s BC teams all the technical features you need in a back flotaion jacket yet with a female-specific cut and design. This back flotation jacket is thoughtfully tailored to enhance the female diver-s experience and represents a new dimension in optimized load distribution, freedom of movement and comfort.

·Back flotation technology positions air bladder in the back, providing exceptional freedom of movement around chest and shoulders.

·Quick-relese integrated weight system.

·3-dump deflation system enables divers to dump air from a variety of underwater positions

·Streamlined air cell technology.

·Patented harness constuction.

·Automatic volume control of air cell through compression straps.

·Rotating Quick Release shoulder buckles and adjustable shoulder straps improve fit by following the diver-s movements.

·Dual zippered pockets with rollout pocket- easily accessible with an expandable compartment for varying amounts of accessories.

·Soft neoprene neck roll and padded back pad provide a skin-friendly padding for significantly more comfort.

·Firmly padded, flexible cummerbund compensates for changes in the suit resulting from varying depths.

Ladyhawk incorporates an array of features which makes it a truly complete package for women divers who prefer a totally uncluttered chest area and back flotation buoyancy.


Back Flotation jackets:

·Back flotation jackets are the BCs of choice for divers preferring a totally uncluttered chest area.

·The design positions the air bladder on the sides of the tank, rather than under the arms or over the shoulders of the diver.

·Underwater it helps the diver automatically to a horizontal floating position.

Buoyancy control & safety:

·Back flotation technology positions air bladder in the back, providing exceptional freedom of movement around chest and shoulders.

·U.S. patented quick-release integrated weight system offers more comfort and convenience. Pouches accommodate up to 5kg each and are secured in specially-designed pockets with oversized buckles. Weight integrated pockets help to avoid sore hips and backache, usually caused by weight belts and are easy to handle even with thick gloves.

·Two rear trim pockets counterbalance front weights and provide a well-balanced floating position. Rear trim pockets are located on both sides of the tank and hold 1.5kg of non-releasable weights each. Together with the back bladder they optimize diver-s trim and adjust to various equipment requirements and diving conditions.

·3-dump deflation system enables divers to dump air from a variety of underwater positions. Because divers are not always in an upright position when they need to vent air, SCUBAPRO jackets feature several dump valves at different positions: on the right shoulder, equipped with an easy to find lanyard handle on the left shoulder, integrated in the corrugated hose in the rear waist level, for a diver in head down position.

·Patented harness to allow for even load distribution.

·Streamlined air cell technology.

·Automatic volume control of air cell through compression straps.

·Available with Balanced Power Inflator. The compact SCUBAPRO BPI inflates and deflates at the touch of a button, featuring special soft touch, ergonomically shaped buttons for a good grip and easy one hand operation with gloves.

·All jackets need a minimum internal volume to allow sufficient air to be injected inside to reach neutral buoyancy and when needed, to create lift for the ascent and flotation on the surface. European Union norms require a minimum lift capacity in relation to the size of the tank used, measured in kilograms. The right lift is a comfort and a safety issue because a jacket also needs to be streamlined to reduce drag in order to save energy when swimming.

·Ladyhawk Lift capacity by size : S:15kg, M:15kg, L:15kg.

Durability:

·1000 denier nylon, our heaviest material for maximum resistance to punctures and abrasion.

·Angled stainless steel D-rings.

·High quality seam construction. SCUBAPRO was the first manufacturer to use a high tech method of welding to achieve a flawless seal on all jackets made from polyurethane backed nylon. The use of high power radio waves allows polyurethane material to bond without heat, resulting in a very strong and long-lasting seam.

Comfort & convenience:

·Teams all the technical features of our Knighthawk with a female-specific cut and design.

·SCUBAPRO integrates a patented back flotation harness which incorporates anatomically-shaped components and provides superior load carrying technology, designed for increased comfort on prolonged or repeated dives.

·Rotating buckles on adjustable shoulder straps improve fit by following diver movements.

·Dual zippered pockets with rollout pocket - easily accessible with an expandable compartment for varying amounts of accessories.

·Soft neoprene neck roll and padded back pad provide a skin-friendly padding for significantly more comfort.

·Firmly padded, flexible cummerbund compensates for changes in the suit resulting from varying depths.

·Available in three sizes:S-M-L.

Size & Lift Capacity:S: 15kg M:15kg ML:15kg L:15kg

Type of floatation:Back Floatation

Quick release (y/n):Yes

Integrated Weight System (y/n):Yes

Material type:1000 Denier Nylon

Primary (integrated) & Trim weight capacity:Primary- 5kg each pocket Trim-1,5kg each pocket

Maximum tank capacity:All sizes: Maximum 18l tank

Scubapro Spring Straps

Scubapro Spring Straps. Scubapro Spring Heel Straps For Jet Fins and Twin jet (pair)

The Spring heels provides a more secure attachment point for your Jet fin than traditional rubber straps. These springs come in 2 sizes (L and XL) ,allowing almost all divers an easy fit.

Scubapro Everflex 7/5 Mm Mono

Scubapro Everflex 7/5 Mm Mono. Our advanced, extra-comfortable EverFlex line has been stylishly redesigned for Winter 2008 to give you even better fit and freedom. Many of the same tested features are included, but our EverFlex neoprene steamers are now in a pre-formed dimensional shape so it fits and moves more naturally with your body and delivers unparalleled comfort, stretch and flexibility. We have also added heliospan lining in the torso area of the steamers, for added protection and insulation. EverFlex provides excellent fit for a wide range of people. If you are tired of the struggle to get into your suit, EverFlex is for you.· 100% EverFlex neoprene material construction using multi-thickness panels for a superior combination of warmth and flexibility.· Interior chest and back panels in absorbent Heliospan material. This smooth fabric is comfortable against the skin and soaks up and holds water, providing extra insulation and warmth.· Double-blind stitched outer seams and single-blind stitched inner seams mean virtually water-tight seams overall, for extra durability and comfort.· Glideskin seals at the wrist, ankles and neck to minimize water transfer.· Ankle zippers with Glideskin seals on the 7/5mm and 5/4mm steamers.· Smooth-cut neckline for enhanced non-pulling comfort.· Compression-molded combination zipper flap/spinepad to reduce water entry and improve back protection.· Nylon webbing thumb loop at base of back zipper for easy donning.· Integrated Tatex knee and shoulder pads for abrasion resistance. Protective treatment on elbows.· Metal main zipper slider is sturdy yet easy to operate.· Treat yourself to total comfort with our new thickness offering for 2008, the 3/2mm EverFlex steamer. This warm water suit looks great on and feels so comfortable you will forget you are wearing one.Material: 100% EverFlex neopreneThickness:7/5mmCollar: Smooth cut necklineCuff seal: Glideskin sealsAnkle seal: Glideskin selas and ankle zippers on 7/5mm & 5/4mmZipper: Back zipperKneepads:TatexKey Feature: double blind stitch on outer seams and single blind stitched on inner seamsColor combinations: Mens: Black/Gray; Womens Black/Blue; Both: Black/Red in 3/2mmHood: not includedCan be combined with: EverFlex Jackets & 0,5 steamer (as an undersuit) or T-Flex or Hybrid-T shirts

Scubapro Climatec Undersuit

Scubapro Climatec Undersuit. Climatec Underwear. The perfect complement to the EverDry4 and all neoprene drysuits, keeping you warmer and dryer for a more comfortable dive.·Lightweight, water-repellent, breathable, 2-layer soft material, ensuring comfort and warmth. ·Double-ended front zipper, ankle stirrups and thumb loops with Velcro neck closure and zippered pockets for easy access, wear and convenience. ·Fashionable graphics for up-to-date styling.Material:Lightweight, water repellent, breathable, softThickness:2-layerWrist seal:Thumb loopsSuspenders:NoPockets:Zippered pocketZipper:2-slidderZipper position:FrontBoots:Ankle stir-upsKneepads:NoHood:No

Scubapro Everflex 5/4 Mm Mono

Scubapro Everflex 5/4 Mm Mono. Our advanced, extra-comfortable EverFlex line has been stylishly redesigned for Winter 2008 to give you even better fit and freedom.

Many of the same tested features are included, but our EverFlex neoprene steamers are now in a pre-formed dimensional shape so it fits and moves more naturally with your body and delivers unparalleled comfort, stretch and flexibility.

We have also added heliospan lining in the torso area of the steamers, for added protection and insulation. EverFlex provides excellent fit for a wide range of people. If you are tired of the struggle to get into your suit, EverFlex is for you.

· 100% EverFlex neoprene material construction using multi-thickness panels for a superior combination of warmth and flexibility.

· Interior chest and back panels in absorbent Heliospan material. This smooth fabric is comfortable against the skin and soaks up and holds water, providing extra insulation and warmth.

· Double-blind stitched outer seams and single-blind stitched inner seams mean virtually water-tight seams overall, for extra durability and comfort.

· Glideskin seals at the wrist, ankles and neck to minimize water transfer.

· Ankle zippers with Glideskin seals on the 7/5mm and 5/4mm steamers.

· Smooth-cut neckline for enhanced non-pulling comfort.

· Compression-molded combination zipper flap/spinepad to reduce water entry and improve back protection.

· Nylon webbing thumb loop at base of back zipper for easy donning.

· Integrated Tatex knee and shoulder pads for abrasion resistance. Protective treatment on elbows.

· Metal main zipper slider is sturdy yet easy to operate.

· Treat yourself to total comfort with our new thickness offering for 2008, the 3/2mm EverFlex steamer. This warm water suit looks great on and
feels so comfortable you will forget you are wearing one.



Material: 100% EverFlex neoprene

Thickness:7/5mm, 5/4mm, 3/2mm

Collar: Smooth cut neckline

Cuff seal:Glideskin seals

Ankle seal: Glideskin selas and ankle zippers on 7/5mm & 5/4mm

Zipper: Back zipper

Kneepads:Tatex

Key Feature: double blind stitch on outer seams and single blind stitched on inner seams

Hood: not included

Can be combined with: EverFlex Jackets & 0,5 steamer (as an undersuit) or T-Flex or Hybrid-T shirts