Dive Rite Transplate

Dive Rite Transplate. Transplate:A hybrid harness designed for divers who want the support of a backpack-style harness for better weight-load distribution, yet wish to dive a hard metal backplate. Designed like a mountaineers backpack, the Transplate harness disperses weight across the hips and back, minimizing shoulder strain.When used with a 6-pound steel backplate, divers can remove or minimize weight pockets. Adjustable straps adapt to a wide variety of exposure suits and means easy donning and doffing. The modular design allows for customization with a wide variety of pockets and accessories. Available in sizes M to XXL. Made in the U.S.A.Please note: Stainless steel and/or aluminum backplate, and cam straps are sold separately.# Shoulder pads constructed of 1000 denier ballistic nylon fabric for tear and abrasion resistance. Two-inch (50mm) nylon webbing rated at 7,000 lbs breaking strength forms the shoulder straps and waist strap.# Four 2-inch D-rings on each shoulder strap are slightly bent for improved access and placement can be adjusted. Note: Size Medium has only one 2-inch D-ring per shoulder strap due to space limitations.# Marine Grade 316 stainless steel hardware is used throughout including: (6) 1-inch D-rings, (2) bent D-rings on each shoulder strap and (2) waist D-rings, pivot rings, belt buckle, cam strap buckles, and side plates.# Shoulder straps feature pivot rings at chest level for comfort, fit, and load distribution.# Acetyl resin engineered plastic quick release buckles on shoulders for easy doff and don.# One-inch nylon webbing rated at 2,200 lbs breaking strength and a Delrin 1-inch quick release buckle are used for a chest strap.# Marine grade stainless steel base plates allow for proper placement of shoulder straps. Plates can be moved forward or backward on the waist strap to get the best fit and performance.# Med: 2lbs 7oz (1.10kg), Lg:2 lbs 8 oz (1.16kg), XL:2 lbs 9 oz (1.16kg), XXL:3 lbs (1.36kg)# Made in U.S.A.When diving the Transplate a single tank adapter is not required, however some divers prefer for added weight or stability.

Dive Rite Stainless Steel Backplate

Dive Rite Stainless Steel Backplate. Dive Rites stainless steel XT backplate is one of the few backplates that is made in the USA. All Dive Rite backplates are laser cut and individually finished by hand. This attention to detail ensures that there will be no rough, jagged edges that could potentially damage harness or accessory webbing. The XT backplate uses an 11 gauge, low carbon and rust resistant 316L grade stainless steel. Weighing in at 5.2 lbs (2.4kg), stainless steel plates are a popular option for divers looking for a more even distribution of ballast weight.The XT backplate is set up with 11" (27.9cm) on-center mounting holes to accommodate standard double tank bolt kits, including two holes for the upper bolt to give user adjustability of tank height. Two sets of 2" slots along the center allow divers to use the backplate for single tank diving without the need for a single tank adapter. A series of slots and holes along the outer11 Gauge 316L Stainless Steel5.2 lbs (2.4kg)10.5" (26.7cm)(widest point) x 15" (39.4cm)1.25" (3.2cm) depth (with contour)In-water buoyancy: -5 lbs (-2.27 kg)Made in USAThe Stainless Steel backplate is ideal when diving aluminum tanks because it adds weight to counteract aluminum buoyancy characteristics.When traveling with a rigid backplate, be sure to disassemble your plate / harness from the wing and store them separately during travel. This will reduce the possibility of the plate impacting and damaging the wing or other gear caused by objects shifting.The 316L grade of stainless steel is a rust resistand grade of stainless steel, however rinsing with freshwater after saltwater use is still recommended.

Dive Rite Single Tank Adaptor

Dive Rite Single Tank Adaptor. For divers who frequently switch between double tank and single tank rigs, our single tank adapter is a convenient way to attach cam straps to a hard metal backplate that does not have tank band slots. Constructed of marine grade 304 stainless steel.Note: Singles Mounting Plate (SMP) does not include cam straps.1.1 lbs (17.6 oz)

Dive Rite Deluxe Harness

Dive Rite Deluxe Harness. A webbing harness designed for hard backplates that provides comfort and streamlining.Swivel points on the shoulder straps ensure a comfortable fit, which is especially important for women and, also, men with broad shoulders.A chest strap keeps the harness in place. MIL-SPEC polypropylene webbing provides strength, yet is soft and wont dig into the body. Harness is adjustable by cutting off excess webbing once diver has sized the harness to his body stature.Standard two-inch webbing allows for customization with a wide variety of pockets and accessories, depending on the needs and desires of the individual diver.Tubular webbing sleeves are included for all points where webbing will come into contact with the backplate to prevent abrasion.Includes marine-grade stainless steel hardware.Made in the U.S.A.* Eleven feet of two-inch (50mm) polypropylene webbing rated at 2,900 lbs breaking strength.* Marine Grade 316 stainless steel hardware is used throughout including: (2) bent D-ring and on each shoulder strap, (2) waist D-rings, and a stainless steel belt buckle.* 1lb 8oz (0.70kg)

Dive Rite Travel Exp Wing 16

Dive Rite Travel Exp Wing 16. The Travel EXP is part of our innovative line of 360 degree, donut-style wings that provide greater stability and control in the water. Now made of tough, 1680 ballistic nylon with a new oval shape, the Travel EXP is a lightweight, small-profile wing that is great for travel and warm-water, single tank diving. The donut-style provides an even volume of inflation on top, sides and bottom, which improves buoyancy control and promotes a more efficient, horizontal trim.At 27lbs/12kg of lift, the Travel EXP can accommodate one 80ft3/12 L tank with additional weight in pockets or a weight belt not to exceed 16lbs. As a part of our modular BCD system, it can be matched with either a TransPac, Transplate or any metal backplate and webbing harness. Features:Black outer bag is made of 1680 denier ballistic nylon that resists tears and abrasion.Inner bladder constructed of thick, 15-mil polyether aromatic polyurethane is resistant to abrasion and chemicals, has excellent strength and will resist the growth of microorganisms.Urethane flanges are welded in place, which make it easy to switch out corrugated hoses and over pressurization valves without tools.Comes equipped with choice of 16-inch rapid exhaust (pull dump), 16-inch or 12-inch elbow along with either15-inch, 22-inch or 27-inch low pressure inflation hose.A set of marine-grade 316 stainless steel grommet mounting holes are used to attach wing to harness and/or singles mounting plate.Approximate dimensions uninflated: 21.5-in H x 15-in W (54.6cm x 38.1cm)2.4 lbs (1 kg)

Dive Rite Standard Cam Strap

Dive Rite Standard Cam Strap. Dive Rite cam straps are 36-inches in length to accomodate 7.25-inch or 8-inch tanks. Our cam straps have marine-grade, stainless steel buckles that are strong, yet also lightweight. They include a sewn-in, non-slip pad to protect the tank from scratches.* 36-inches long - standard* 2-inch wide nylon* 7,000 lbs tensile strength

Dive Rite Crotch Strap 2 Inch

Dive Rite Crotch Strap 2 Inch. Preferred by divers who use scooters (DPVs) for extended periods of time due to the added comfort the 2-inch width provides.Used for fastening a harness and backplate securely to a divers body, the 2-inch crotch strap is used to reduce the likelihood of gear slipping upwards on the body in the water, resulting in the tank hitting the back of the head during a dive.Continuous piece of nylon webbing provides strength, yet is soft and wont dig into the body.Includes a neoprene sleeve to protect exposure suit from abrasion.Made in the U.S.A.* Two-inch nylon webbing crotch strap has 2,800 lbs tensile strength and is 42-inches long.* Stainless steel 304 welded scooter ring for attaching scooter leash.* 6oz (170g)* Made in U.S.A.

Dive Rite Leg Pocket

Dive Rite Leg Pocket. Part of our new line of harness accessory pockets that builds upon technology from the backpacking industry.Each pocket includes daisy chain webbing on the external pocket for clipping Z-knives, trauma shears or any tool that you need in easy reach. Our new Thigh Pocket includes an innovative leg band made of a proprietary material used in bandages.The material holds up to salt water and dries quickly, plus silicone strips placed on the inside of the band grip your exposure suit and keep the leg band in place. At 4-inches in width (10 cm), the new leg band will be comfortable and secure. The pocket is attached via a buckle on the waist belt, allowing a diver to don or doff the thigh pocket without having to unbuckle the waist belt and slide the pocket off.You have probably seen daisy chain technology on hiking and mountaineering backpacks. Daisy chains are webbing loops sewn to form a chain. On backpacks, they allow you to attach carabineers for accessories. Dive Rite has taken that concept one step further by developing unique sheaths for our cutting devices that will clip into the daisy loops.But thats not all. Inside our new pockets resides a 36-inch, looped lanyard to clip off reels, line markers and pocket lights. No more fumbling for the right tools, just pull out the lanyard, select the tool you need, and stuff the loaded lanyard back in the pocket.Lanyard too long- Simply cut and shorten the cord, re-tie the simple knot and cut off the excess. Weve seen a few divers out there sporting their own homemade version.Now the rest of us can enjoy the same great idea.Internal Space: 21x14x4cm