Dive Rite Nitek X

Dive Rite Nitek X. A mixed gas computer with full decompression capabilities that monitors seven different gas mixes including helium, nitrogen and oxygen. Uses a modified Bühlmann ZH-L16 algorithm with 75/95, 40/100 and 30/75 gradient factors. Custom gradient option comes standard with the unit.During a decompression dive, the NiTek X provides real time decompression information based on diver pre-set gas mixes. Gases can also be changed, if necessary, during the dive.Simple to program, the NiTek X has intuitive menus that are easy to understand without complex instructions. A lightweight frame along with a large, 2.7-inch (6.85 cm) screen makes it easy to keep track of the dive plan at a glance. The NiTek X displays data in both imperial and metric measurements. It is upgradeable for closed circuit rebreathers including constant PO2 set point and external oxygen sensor decompression capabilities. Optional cable for 4th cell integration.Made in the U.S.A.# Monitors up to 7 different gas mixtures including helium, nitrogen and oxygen# Underwater gas switching, plus changing between open and closed circuit# Modified Bühlmann ZH-L16 algorithm with gradient factors# Standard custom gradient factor# Oxygen exposure tracking display via OLI (oxygen limit index) bar graph# OTU available by download with desktop logbook program# Visible warnings for PO2, deco violation, ascent rate, and fourth cell error for CCR# Dive mode screen will display prior to entering water# Date, time and water temperature display# Current and max depth display# Dive time elapsed and no-decompression time remaining display# Desaturation and time-to-fly information display# Back lighting with 10 second LCD visible in all light conditions # Logbook will hold a minimum of 15 hours based on settings# PC and MAC uploadable with NiTek Workbench software and optional PC interface# Maximum depth 492 feet (149 meters)# Adjusts automatically for altitude up to 19,685 (6,000 meters)# Imperial and Metric units of measure# User replaceable lithium CR123A battery# 3.9-inches wide X 3.7-inches high X 0.78-inches thick (9.9cm wide x 9.39 cm high x 1.98 cm thick)# Mil-Spec Hard anodized aluminum case with scratch-resistant, mineral glass screen# 12 oz. (340 gms)

Dive Rite Fins

Dive Rite Fins. Designed for performance, Dive Rite fins are ideal for diving in heavy flow or ripping currents. The special blade design works for any style of kick, including frog kicks, modified flutter, and power kicks. Preferred by technical divers, this fin helps the diver push heavy loads through currents, maximizing every ounce of energy.Injection molded from high quality monoprene gives divers the best performance with minimum effort. The 8 1/2-inch pliable spring-heel strap allows for quick donning/doffing on a rolling dive boat. A comfort heel pad and convenient pull tab adds to the ease of use.# Injection molded monoprene plastic gives rigidity and flexibility for maximum performance with minimum effort.# Marine grade stainless steel spring heel straps are corrosion resistant.

Dive Rite Stage Bottle Strap So40

Dive Rite Stage Bottle Strap So40. Our Stage Bottle Rigging comes with everything a diver needs to correctly set up secondary bottles for years of technical diving.Our 1-inch (2.54 cm) nylon webbing with 2,200 lbs (998 kgs) tensile strength forms the carrying strap. Resistant to breakage, rot and splitting, nylon webbing creates a durable and long-lasting foundation for stage rigging, yet can be cut free in case of entanglement. Rugged elastic hose retainer band resists rolling and tearing and has the right amount of stretch.A large webbing loop on the retainer is easy to grip even with gloves on.Marine grade stainless steel cylinder clamps and hardware are saltwater ready and resistant to corrosion.A 1-inch (2.54 cm) piece of tubular webbing and a short piece of clear tube are provided to cover the tank clamp and screw for abrasion protection.A longer piece of clear plastic tubing slides over the nylon webbing to form a comfortable handle on the carrying strap. Stainless steel XL bolt snaps.* Stainless steel XL bolt snap * One-inch (2.54 cm) nylon webbing strap with 2,200 lbs (998 kgs) tensile strength* Neoprene-infused elastic hose retainer band resists rolling, tearing and abrasion* Marine grade stainless steel cylinder clamps and hardware are saltwater ready and resistant to corrosion* One-inch (2.54cm) tubular webbing, provides diver/tank clamp abrasion protection

Dive Rite Double Bolt Snap

Dive Rite Double Bolt Snap. Made of marine grade 316 stainless steel, our heavy-duty double bolt snap is designed for saltwater use.This clip features gates at both ends that allow for quick and easy temporary connection of two items.Each bolt snap is meticulously inspected at our factory to ensure smooth edges that wont cut fingers and gates open and shut reliably.Size 4 3/4-inch.

Dive Rite D-ring Bent

Dive Rite D-ring Bent. Combined with a belt slide (sold separately) the D-ring is the best way to create an attachment point on soft webbing. D-rings 2-inch bent at 45 degree angle (HW1062)Made of marine grade 316 stainless steel, our heavy-duty D-rings are designed for saltwater use.

Dive Rite Assembling Screw (2pcs)

Dive Rite Assembling Screw (2pcs). The stainless steel assembly screws are used for attaching various accessories to a TransPac harness or to a hard backplate (such as lift bag pouches, suit inflation mounting systems and sidemount buttplates).Another common use is to secure the wing to the TransPac harness or hard backplate when rigged for a single tank--When the BCD is taken off a single tank (perhaps to swap tanks between dives), the cam straps alone are not enough to keep the wing neatly attached to the harness.Designed to fit through a 3/8” hole, the Stainless Steel Assembly Screws include O-rings that create friction to help keep the screw in place.Sold as a set of two.

Dive Rite H1000 Hid Light Slimline

Dive Rite H1000 Hid Light Slimline. Small, yet powerful our HID 1000 Slimline packs a powerful 1000 lumens of illumination, which is 100% brighter than a 10W HID.

An all-new protective reflector housing is shock-resistant and adjustable, offering the ability to change focus from a wide flood to a tight beam.

Powered by a 12V 4500 mA NiMH battery gives 3.5-hours of burn time and is depth rated to 500 feet (152m).

The Slimline canister holds the battery pack and is machined from a single piece of chloride pipe (PVC). Coupled with its round shape and poly vinyl chloride (PVC) construction the canister is indestructible even under extreme pressures.

The canister lid houses the on/off switch inside a switch guard to prevent accidental on/off. A compression o-ring seal keeps water from entering the canister and locking latches prevent unintentional opening of the lid.

Comes standard with Goodman metal hand mount.

Includes NiMH charger and comes packed inside a protective case.

Made in the U.S.A.



Features:

- 15-watt HID H1000 bulb is 100% brighter than the 10-watt HID H10

- Bulb has 1,100 hour life requires warm-up of 4-minutes after striking prior to shut-off.

- Color temperature of 6,500 degrees Kelvin

- External, adjustable focus reflector

- Burn time approximately 3.5-hours

- 12V 4.500 Amp NiMH battery requires cycling when first used to achieve maximum burn times

- Charger has 120/220 Vac rating with auto sensing with a standard 2-pole sealed plug and 2-pronged wall outlet plug that connects to any standard power outlet. Red and Green LED indicators.

- Single compression style o-ring canister seal prevents water entering canister.

- Compression-style locking hatches eliminates unintentional opening of the lid.

- Two-inch nylon webbing belt mount fits standard webbing harnesses.

- Canister mounted toggle switch with protector to minimize accidental on/off.

- 3.8 lbs (1.72 kg) (includes battery)

- Buoyancy is 1.25 lbs (0.57 kg) negative in fresh water

- H1000 light head: 4.25-inches long x 3-inches diameter at reflector and 2.75-inches diameter at ballast

- Slimline canister: 9-inches long x 2.6-inches diameter (22.86cm x 6.60cm)

Dive Rite Line Cookie

Dive Rite Line Cookie. Sometimes a directional marker (line arrow) is not the proper marker to leave -- Non-directional cookies mark a specific place on the line, but do not give directional information.They are preferred over line arrows for setting up traverses or circuits because they avoid the possibility of having directional markers on the line which could point away from the closest exit, which could be disastrous in an emergency. They can also offer reassurance during stressful moments.They are a must at jumps, especially jumps made from points at which no permanent marker has been installed.Placed on the outbound side of the jump, they confirm exit direction as divers return to the jump.