Dive Rite Argon Bottle Regulatro First Stage

Dive Rite Argon Bottle Regulatro First Stage. Our Argon Bottle Drysuit Inflation Regulator is a compact first stage regulator that can be used on any 200 BAR DIN valve. Measuring only 2 3/8-inches (6 cm) tall, this is the most compact suit inflation regulator available. It has an unbalanced piston first stage with an intermediate pressure of 120 psi and includes an over pressurization valve.Specifications:- Two low pressure ports (3/8-24 UN)- Temperature rating: 50 to 95 F (10 to 19 C)- Intermediate pressure of 120psi- 8 oz (226.8 g)CONNECTIONS: DIN 200WITH PISTONOFFSET: NOROTATING TURRET: NOCOLD WATER KIT: NO

Dive Rite Finger Spool 125

Dive Rite Finger Spool 125. In the early days of cave diving, reels were not available to buy off the shelf. Divers used anything they could, including empty electrical wire spools. When exploring, divers would pay out the line and if they didnt empty the spool it would be left in the cave for the next dive. The spools came in various sizes and North Florida cave diver, Bill Hogarth Main, popularized smaller spools for safety and jump reels. Today, our 125-foot Finger Spool is often used for shooting lift bags as well as a safety reel. Small and low-profile, a spool fits nicely out of the way in a pocket or clipped off to a D-ring. The holes in the side allow for clipping in the double ended snap anywhere along the perimeter of the spool to keep the line tight when not in use. Made of ABS plastic, finger spools are simple to use and virtually indestructible in the water. They come standard with a large [continued]Specifications:- White, DuPont fiber braid line provides strength and minimizes fraying (RE4900)- Orange Dacron line does not stretch, keeping tension firm (RE4920)- Uses #24 braid line giving 220-lbs of breakage strength.- Injection molded polycarbonate spools resist breakage and cracking.- Marine grade stainless steel double ended bolt snap is corrosion resistant.- 6 oz (170g)

Dive Rite Stainless Steel Finger Spool 30

Dive Rite Stainless Steel Finger Spool 30. These stainless steel finger spools are as rugged as they come. Crafted of 16 gauge 304L stainless steel for durability in marine-grade environments, these reels are TIG welded and then electro-polished.Available in 30-foot (9.2m) and 100-foot (30.5m) increments, these stainless steel spools are compact with a narrow footprint as compared to similar plastic spools, giving the diver the advantage of saving real estate or carrying multiple spools easily. Smooth edges provide comfort and an easily-held ergonomic design.Includes a premium quality, marine-grade stainless steel bolt snap that provides smooth operation and #24 white, DuPont fiber braid line.

Dive Rite Sidewinder Jump/gap Reel

Dive Rite Sidewinder Jump/gap Reel. North Florida cave diver, Woody Jasper, first invented sidewinder-style reels around 1980. Less likely to entangle than other reels on the market, Woodys original reel was made of aluminum and a PVC spool. The side-handle style of the reel lent itself to exploration because it could easily switch from hand to hand while laying out line. Twenty years later, sidewinder-style reels were popularized in the technical diving community when DIR enthusiasts began using them for paying out line in deep caves at high speed on a DPV. Our Sidewinder series of reels are designed to be anti-jam by using precision machine tolerances between the frame and the spool making it nearly impossible for the line to slip between the spool and the handle. Choose between our Sidewinder Cave Primary (RE50400) with 400-feet of #24 braid line our Sidewinder Wreck Primary (RE50250) that has 250-feet of #36 braid line, both with extra large stainless bolt [continued]Specifications:- DuPont fiber braid line provides strength and minimizes fraying.- Cave series reels use #24 braid line giving 220-lbs of breakage strength. Wreck series reels use #36 braid line giving 350-lbs of breakage strength.- Injection molded polycarbonate spool resists breakage and cracking.- Marine grade stainless steel axle is corrosion resistant.- High quality aircraft grade aluminum frame is corrosion resistant.- Marine grade stainless steel bolt snap is corrosion resistant.- Knurled lockdown screw has a low profile to prevent snagging- 12 oz (340g)

Dive Rite Nomad Lt - Sidemount System Complete Ow

Dive Rite Nomad Lt - Sidemount System Complete Ow. Designed for warm water diving with aluminum 80s, the Nomad LT Bluewater is designed for the sidemount diver who is diving in open bodies of water. The low profile design packs easy for travel at only 5.5 pounds including all the hardware. The lift is pushed toward the bottom by two baffles to keep the lift in the small of the back. The Super Fabric back is tough and puncture resistant. The inflator assembly is routed over the shoulder just like any openwater BC and an epaulet secures it over the shoulder. The lower dump valve is located on the lower backside of the BC.We use two seperate bungees that attach to our exclusive daisy chain connection design so one size bungee works for any size diver. * Small volume steel cylinders can be used when diving a dry suit.*The Nomad LTs exceptional design creates the first sidemount rig of its kind that is simple to set up and configure with an all-in-one webbing harness and wing combination. Pivot points at the chest provide comfort for women and large-chested divers and stainless steel slides at the waist provide a customizable fit. See our Nomad LT Fitting Video for tips.Unique to the Nomad LT is the tight wing profile that provides instant trim with an ingenius 3-inch (7.6cm) expansion panel located at the base of the wing. This puts air where it is needed for optimal trim and efficiency. A low profile buttplate is located just at the base of the wing for divers with steel 85s, providing easy access to bottles. SuperFabric® brand technology on the outer wing provides optimum resistance to punctures and abrasions, while remaining very flexible.Weighing only 5.4lbs (2.5kg), the Nomad LT is our favorite for travel to warm water destinations. Extremely streamlined, the Nomad LT has 22lbs of lift to carry twin aluminum 80 cylinders with a wetsuit or Faber steel 85s when wearing a drysuit. Made in the U.S.A.** Faber steel 85s are lighter than other brands of similar size tanks. Only wear Faber steel 85s with the Nomad LT.*** Due to a lift capacity of 22lbs, the Nomad LT is designed to support a maximum of 10lbs of additional weight worn for trim or buoyancy purposes.Specifications:- All-in-one, non-modular rig is one complete piece.- Comes standard with our tank chokers (BC2720) and ring bungees (BC2722).- Standard 12-inch elbow inflator. 16-inch available upon request.- Black outer bag is made of SuperFabric brand technology and 1000 denier Cordura® offering superior durability.- Inner bladder is constructed from heavy-duty 210 denier nylon laminated bladder which is highly resistant to pinches and punctures- Urethane flanges are welded in place, which make it easy to switch out corrugated hoses and over pressurization valves without tools- Marine grade stainless hardware- One size fits all- Made in the U.S.A.

Dive Rite Nomad Weight Plate

Dive Rite Nomad Weight Plate.

Dive Rite Back Up Bx-1

Dive Rite Back Up Bx-1. The BX-1 handheld light is small in size and big in brightness with a 220 lumen output on an 8 degree beam angle. The light beam also gives a halo of light surrounding the concentrated beam for greater visibility. This powerful light can run on user choice of 3 AAA alkaline batteries (included), or 1 Lithium 18650 battery with included battery carrier. The double o-ring seal on the anodized aluminum body provides proven protection against flooding. The BX-1 is powered on and off with a simple twist of the head. Nylon line lanyard with barrel lock prevents accidental loss of the light by dropping it. The BX-1 handheld light is an ideal choice for a recreational primary light or technical backup light.SPECIFICATIONS:220 Lumens8 Degree Beam2.5 Hour Burn Time10,000 Hour LED Burn LifeDepth Rating: 492ft (150m)Weight: 7 oz. (.2 kg) with 3 AAA batteriesDimensions: 5in (12.7cm) length x 1.7in (4.32cm) widthTIPS:Regularly check the double o-ring seal to insure it is free of debris and that the o-rings are intact. Clean o-rings should be coated with a light sheen of silicone lubricant before reassembling light.When powering the light with an 18650 lithium battery, the light will be brighter longer, but will not extend actual burn time. AAA alkaline batteries will still provide an equivalent burn time, however the light brightness will begin to taper off as the battery voltage drops.

Dive Rite Rx-17

Dive Rite Rx-17. The Dive Rite RX-17 LED lighting system brings a new level of brightness to the RX family of lights. Utilizing the technology of the CREE XM-L2 Cool White LED chip, the RX-17 combines maximum brightness with maximum efficiency. With over 4 hours of burn time at full power, a generous light output, and using proven technology and construction, the RX-17 will meet the demands of any diver wanting to light up the darkness.Activated using a rotary switch on the light head, the RX-17 allows divers the ability to mount the battery canister anywhere on their equipment configuration depending on preference, eliminating the need to be able to reach the canister to activate a switch. A tight, 6 degree beam for the hot spot is ideal for signaling while being surrounded by a bright halo, illuminating the environment surrounding the diver.The RX-17 produces and maintains a full power output of 17,300 LUX for 4 hours using the RX17 LED Primary LightCatalog : Lights :#LT9870-RX17WHERE TO BUYDive Rite NiMH Slimline battery. An integrated microprocessor control unit monitors battery voltage to keep the light operating at its peak efficiency and will step the output down as battery voltage drops, eliminating the possibility of suddenly being left in the dark due to a dead battery. The light will alert the diver of this step down in power by a series of flashes, after which point the light will produce another 1.5 hours of usable light.The RX-17 LED light features Dive Rites exclusive soft handmount with quick-release mount (QRM). The Slimline nickel metal hydride battery with included Smart Charger does not contain lithium, and is not subjected to TSA travel restrictions. A hard carrying case neatly stores the light and its contents for travel and storage.The Dive Rite RX-17 is proudly designed, manufactured, assembled, and tested in the USA.NOTE: Do NOT plug the battery into the light head while the battery is not in the canister. Even with the light off, plugging the light in with the polarity reversed can damage the light. Always use a fresh, properly charged battery to achieve rated burn times.SPECIFICATIONS:CREE XM-L2 Cool White LED ChipLUX @ Full Power* - 17,300LUX @ Medium Power* - 10,900LUX @ Low Power* - 8,900* Average LUX Measured at 1 meter using Konica Minolta Chroma MeterAverage Kelvin Color Temperature - 7000 K6 degree beam anglePower Consumption Rate - 800 mA4.5 amp NiMH Slimline battery with included Smart Charger4 hour burn time at full power1.5 hour burn time after step down from full powerBanana plug battery / charger connectorsDepth Rating - 500 ft (152 m)3.8 lbs (1.72 kg)Buoyancy (-1.25 lbs)Soft handmount with QRMCarry caseMade in USA