Dive Rite Transpac Stab Plates

Dive Rite Transpac Stab Plates. The stainless steel TransPac Stabilizing Plates firmly secure a TransPac to any set of double tanks that use industry-standard bands and bolts.

They are curved to fit the spacing of double tanks, and are the only item needed to connect a TransPac harness and a wing to a set of double tanks (a hard backplate is not needed).

The TransPac harness and the wing end up being sandwiched between the double tanks and the Stabilizing Plates, with the Stabilizing Plates functioning like large washers. Sold as a pair.

Dive Rite Deluxe Qr Harness

Dive Rite Deluxe Qr Harness. A webbing harness designed for hard backplates that provides comfort and ease of entry/exit along with streamlining. Swivel points on the shoulder straps ensure a comfortable fit; especially important for women and, also, men with broad shoulders. The chest strap keeps the harness in place while a quick release buckle allows for easy donning and doffing of equipment. Two-inch (50mm) nylon webbing provides strength, yet is soft and wont dig into the body. Harness is adjustable by cutting off excess webbing once diver has sized the harness to his body stature. Standard 2-inch webbing allows for customization with a wide variety of pockets and accessories, depending on the needs and desires of the individual diver. Tubular webbing sleeves are included for all points where webbing will come into contact with the backplate to prevent abrasion. Includes marine-grade stainless steel hardware. Made in the U.S.A.Specifications:- Two-inch (50mm) nylon webbing rated at 7,000 lbs breaking strength.- One-inch nylon webbing rated at 2,200 lbs breaking strength and a Delrin® 1-inch quick release buckle are used for a chest strap.- Two-inch Delrin® quick-release buckle on the left shoulder strap facilitates donning/doffing of equipment.- Marine Grade stainless steel hardware is used throughout including: (2) bent D-rings on each shoulder strap, (2) waist D-rings and a stainless steel belt buckle.- 1lb 10oz (0.76kg)

Dive Rite Tech Buttplate

Dive Rite Tech Buttplate. When sidemounting stage tanks or rebreather bailout bottles, buttplate rails can be difficult to access if backmounted gear covers them up. Problem solved with our new Tech Buttplate. Its rectangular shape places tank attachment points at the edge of the divers body, while outrigger hardware is easy to find due to its orientation facing outwards on the plate.Specifications:- Buttplate made of reinforced nylon to provide the proper amount of rigidity to hold tanks in position and eliminate sag.- Two stainless steel handles are used for tank attachment.- Includes two stainless steel assembly screws for securing buttplate to backplate.- Accommodates any size crotch strap- 1.3lbs (590g)

Dive Rite Right Angle Adaptor 70 Degrees

Dive Rite Right Angle Adaptor 70 Degrees. Our Right Angle Adapter attaches between the regulator second stage and its low pressure hose, routing the hose down the divers chest and/or under the arm. This increases comfort and streamlining. This low-profile adapter is not an omni-directional swivel and so it maintains its angle and will not allow the regulator to flop around. Placed on a 40-inch primary regulator hose in a single-tank regulator configuration, the Right Angle Adapter allows the hose to route down under the arm and up to the mouth, getting rid of the large hose "arc" that protrudes from the tank around the diver and hence, can become easily snagged. Sidemount divers use the Right Angle Adapter to route their hoses down chest to the bottles eliminating the need to route the hose around the neck.Specifications:- 1.8oz (51g)

Dive Rite Primary Cave Reel

Dive Rite Primary Cave Reel. The genesis of the Primary Reel began in 1984 when North Florida cave divers needed a reel with 400-feet of line in order to reach the main line in the Devils cave system at Ginnie Springs. Voila! The Dive Rite Primary Reel was born. Today, divers may choose between our Primary Cave Reel (RE4300) that has 400-feet of braided #24 line and a medium stainless steel bolt snap or our Primary Wreck Reel (RE4310) that has 250-feet of heavier #36 braid line and an extra large stainless bolt snap. These reels position the handle on top, which helps divers who use a handheld light to hold both the light and the reel in one hand, freeing the other hand to work the reel. The frame of the Primary Reel comes with a series of pre-drilled holes so divers can change the handle position from a top-mount handle, to a side-mount handle or a left-hand operated reel. The spool is held in place with a stainless steel "C" clip so replacing [continued]Specifications:- DuPont fiber braid line provides strength and minimizes fraying.- Cave series reels use #24 braid line giving 220-lbs of breakage strength. Wreck series reels use #36 braid line giving 350-lbs of breakage strength.- Injection molded polycarbonate spools resist breakage and cracking.- Marine grade stainless steel frame and axle are corrosion resistant.- Marine grade stainless steel bolt snap is corrosion resistant.- T-top lockdown screw for easy grip- 1.68 lbs (0.76 kg)

Dive Rite Stainless Steel Finger Spool 10

Dive Rite Stainless Steel Finger Spool 10. These stainless steel finger spools are as rugged as they come. Crafted of 16 gauge 304L stainless steel for durability in marine-grade environments, these reels are TIG welded and then electro-polished.Available in 30-foot (9.2m) and 100-foot (30.5m) increments, these stainless steel spools are compact with a narrow footprint as compared to similar plastic spools, giving the diver the advantage of saving real estate or carrying multiple spools easily. Smooth edges provide comfort and an easily-held ergonomic design.Includes a premium quality, marine-grade stainless steel bolt snap that provides smooth operation and #24 white, DuPont fiber braid line.

Dive Rite Rx10 Slimline Led Complet System

Dive Rite Rx10 Slimline Led Complet System. The RX10 is the next generation in our advanced LED lighting systems. Incredibly bright with a tight, fixed focus beam. As always, the RX brand utilizes an intelligent microprocessor control unit to keep the light operating at peak efficiency. This smart controller monitors the battery voltage, alerts the diver to low battery upon turn on and monitors temperature for device protection.At full power, the RX10 has a seven hour burn time, however, using smart technology, the RX10’s microprocessor “thinks” for the diver and automatically switches from full power to a graduated voltage drop to extend battery run-time while maintaining usable light. A key added safety feature is the battery check function. The diver can check battery state-of-charge by simply switching the unit on. If the unit flashes three rapid pulses, the diver knows that the battery is low before the dive and will start in the half-power [continued]Specifications:- 1000 system lumens @ full power- Lux ratings: 10,500 @ 1 meter as measured using a Konica Minolta Chroma Meter- CREE® XLamp® LED, 10,000 hour life- Color Correlated Temperature (CCT): 6,000 Kelvin- Power Consumption - 12Watts @ maximum output using a 12v 4500ma NiMH slimline battery. Does not fall under TSA travel restrictions. NiMH Smart Charger automatically adjusts to 110/220 volts AC and 50/60Hz frequency.- 6-hour burn time. Four hours at full power with an additional two hours at reduced power using fresh, conditioned batteries- Depth rating - 500 feet (152 m)- 3.8 lbs (1.72 kg) including battery, Buoyancy (-1.25 lbs)- Slimline canister: 9”(L) x 2.6” (dia.)- [22.86 cm x 6.60 cm]- Made in the U.S.A.

Dive Rite Cavern / Safety Reel #24

Dive Rite Cavern / Safety Reel #24. Cavern/Safety ReelThe Cavern/Safety Reel came about as North Florida cave training agencies began establishing standards in cave training. The established standard for cavern divers was to limit penetration no farther than 130 linear feet from daylight. Experienced cave divers use the Cavern/Safety reel as a jump reel or as a back up for security. Wreck divers will use this reel for shooting lift bags. The frame of the reel comes with a series of pre-drilled holes so divers can change positions from a top-mount handle, to a side-mount handle or a left-hand operated reel. The spool is held in place with a stainless steel "C" clip so replacing the spool or cleaning up a jammed reel is simple.- White, DuPont fiber braid line provides strength and minimizes fraying.- Orange, Dacron line does not stretch, keeping firm tension.- Cave series reels use #24 braid line giving 220-lbs of breakage strength. Wreck series reels use #36 braid line giving 350-lbs of breakage strength.- Injection molded polycarbonate spools resist breakage and cracking.- Marine grade stainless steel frame and axle are corrosion resistant.- Marine grade stainless steel bolt snap is corrosion resistant.- T-top lockdown screw for easy grip- 1 lb (0.45 kg)TIPS:1.Before diving with a new reel (or a dry reel that has been in storage), put the reel in a bucket of water and after soaking, pay out the entire length of line and reel it back in. This will moisten the line, precluding it from swelling on the reel and further preventing the possibility of jamming or damaging the spool.2.As with most dive equipment, you should rinse your reel with fresh water following each dive. You should also periodically disassemble the reel, and remove any build up of salt or sediment on its internal parts.3.Dive Rite recommends pulling some or all of the line off the spool before each dive, then rewinding it neatly but not too tightly, so as to prevent the possibility of jamming during line deployment.4.Finally, too much line on the spool can cause jams during initial deployment, if you are having a problem with jams try removing 10 or 15 feet of line.