Boutique slm
Bons plans
17.01 EUR
64.29 EUR
Dive Rite Lift Bag
Dive Rite Lift Bag. Salvage divers, underwater archaeologists or anyone who needs to recover a heavy underwater object will appreciate the design of our lift bag. Its trapezoidal shape means more air at the top, creating a shorter, lower profile bag that is ideal for inflation inside tight spaces. Intended for lifting heavy objects, our Lift Bag contains an internal dump valve with pull cord that is used by the diver ascending with the bag to control ascent rate. Open design means air will vent out the bottom in case of a rapid ascent. Self-storage pocket makes stowing and carrying the bag a cinch. Available in ANSI safety orange 100lb or 50lb. Made in the U.S.A.
18.49 EUR
Dive Rite Seeme Float
Dive Rite Seeme Float. A compact version of our Surface Marking Device, the Seeme Float is often referred to as a "safety sausage". A Seeme Float is a must-have accessory for every open ocean diver in the event they are separated from the boat and are also helpful on drift dives or night dives. Fully closed, it inflates orally and includes a clear plastic holder for a chemical glow stick. At 44-inches long and 4-inches wide (112cm x 10cm), it secures easily in a pocket or can be clipped to a harness D-ring with the attached plastic clip.Features:- Oral inflation tube with one way valve. - Ultrasonically sealed seams.
87.58 EUR
Dive Rite Surface Marker Buoy
Dive Rite Surface Marker Buoy. When considerable lift is needed, the Surface Marker Buoy is the deco bag of choice. With 100 lbs of lift, the Surface Marker Buoy can be inflated at depth for decompression or inflated at the surface as a float ball. At 3-feet tall by 24-inches wide (0.91m x 61cm), the Surface Marking Buoy can hold a technical diver with multiple tanks while waiting on the dive boat or is ideal for a dive master with a group of divers to hang on. An oral/power inflator allows the bag to be inflated at the surface as well as at depth. The completely closed bag has a standard over pressure valve to allow excess gas to vent during ascent and/or to depressurize the bag before boarding the boat. Made in the U.S.A.Technics features:- 100 lbs lift.- Reflective tape on both sides for added visibility.- 300 D polyester bag is extra-tough and more resistant to fading.- Durable water repellant finish (DWR) inhibits water saturation and dries quickly.- RF welded seams with nylon reinforced edges. - 304 stainless steel D-ring lift point.- Over pressure relief valve. - ANSI-certified safety orange.- 0.9lb (408g).
63.35 EUR
Dive Rite Surface Marker Tube Hybrid
Dive Rite Surface Marker Tube Hybrid. Rebreather divers and open circuit divers alike will appreciate our hybrid Surface Marker Tube. An oral/power inflator makes inflation simple for rebreather divers who do not have easy access to a regulator for inflation. Likewise, a funnel-shaped, anti-spill baffle allows open circuit divers to inflate this SMT with a regulator. A standard over pressurization valve allows excess gas to vent during ascent and/or to depressurize the bag at the surface. Built-in carrying sleeve. ANSI safety orange. Made in the U.S.A.Features:- 30 lbs lift.- Reflective tape on both sides for added visibility.- 300 D polyester bag is extra-tough and more resistant to fading.- Durable water repellant finish (DWR) inhibits water saturation and dries quickly.- RF welded seams with nylon reinforced edges. - 304 stainless steel D-ring lift point.- Over pressure relief valve.- Funnel-shaped baffle.- ANSI-certified safety orange.- 0.8lb (363g).- 150 x 20 cm
16.42 EUR
Dive Rite Buoy Mesh Bag
Dive Rite Buoy Mesh Bag. The Dive Rite Lift Bag Sleeve gives divers the option to wear the bag on a deco bottle or harness. Attaches to a deco bottle using a standard 2-inch cam strap or can be fitted onto metal clamps. Hang on any standard metal backplate or TransPac using our assembly screws for a snug fit.The Lift Bag Sleeve holds our largest bag, the 100lb Surface Marker Buoy and can be deployed with one hand, even with gloves.Made in the U.S.A.11.75" long 7.25" wide.Features:- 600 denier ballistic nylon fabric is tear and abrasion resistant. - Two-inch (50mm) nylon webbing on reverse of pocket allows attachment via cam strap or metal clamps onto a tank. - Nickel plated brass grommets allow for attachment with assembly screws to a harness or backplate and resist rust and corrosion. - 7.25-in high x 11.75-in wide (18.4 cm x 29.8 cm). - 3 oz (85 grams).
27.12 EUR
Dive Rite Notebook Dive Writes
Dive Rite Notebook Dive Writes. Our popular Dive wRites Notebook Cover gets has a clear, plastic sleeve placed on the outside back panel. Used for carrying dive tables, this sleeve gives divers quick access to critical decompression information.Exploration divers have been using underwater notebooks for years to survey wrecks and cave systems. They are excellent for jotting notes, tic-tac-toe during decompression stops, or for keeping deco schedules. Our Dive wRite Notebook is a 28-page notebook that is waterproof and reusable. It comes with a solid, carbon-stick pencil attached by a lanyard and is small enough to be carried in a pocket. Our Dive wRite Cover is a tri-fold organizer that accommodates our notebook along with storage for three pencils and three pockets for those extra survey notes and a clear plastic sleeve on the outside back panel. Features:- 1680 denier ballistic nylon. - 5-inches wide x 7-inches tall (12.7cm x 18cm).
1.51 EUR
5.55 EUR
Dive Rite Slate Executive
Dive Rite Slate Executive. Our Executive Slate has six, compact erasable slates held together by a stainless steel ring. A cord with sleeve stows the attached solid carbon stick pencil. Small enough to fit in a tiny pocket or grouped with other larger items, the Executive Slate is ideal for note taking or a back up communication device.
6.95 EUR
Dive Rite Wrist Slate
Dive Rite Wrist Slate. The Wrist Slate offers three, separate writing surfaces via three leaves that flip up for easy access. An elastic cord snaps the leaves back into place and a cord with sleeve stows the attached solid, carbon-stick pencil. The Wrist Slate fits on the curve of the forearm and can be attached with either the Velcro strap or two small elastic cords included in the kit. Use them for note taking, back up deco schedules, or as a safety communication device.Features:- 4-inches tall x 4-inches wide (10 cm x 10 cm).- 4.2-oz (0.12 kg).
23.35 EUR
26.85 EUR
Dive Rite Jon Line With Hook
Dive Rite Jon Line With Hook. Technical divers use a Jon Line to maintain a certain depth when ascent lines are crowded with other divers or when the current is ripping. Our Jon Line easily clips onto an anchor line or down line and is also easy to remove.
Stored inside a small, dispenser pouch is our 5-foot yellow 1-inch nylon webbing and with a marine-grade, stainless steel carabineer. The pouch will slide easily onto any standard 2-inch webbing.
The carabineer can be clipped into lines to free run up and down the line or wrapped and clipped for a friction wrap around a anchor/down line.
Specifications:
- Sewn nylon webbing
- Stainless steel carabineer
- 5-feet (1.52 m) in length
- Elastic attachment loop on pouch
13.07 EUR
Dive Rite Clipper Pocket
Dive Rite Clipper Pocket. The Clipper Pocket is a small, versatile pocket that can be mounted to any standard 2-inch webbing waist belt. It is ideal for small divers who do not have the girth to carry a larger pocket or for any diver who needs a small pouch to carry a slate, pocket light or seeme float. The Clipper Pocket can also be used as a weight pocket for weights up to 5-lbs, noting that there is not a quick dump capability on this pocket. It can be mounted in a variety of positions with our unique H pattern belt loops. A secure Velcro closure keeps the pocket flap closed and resists sagging or stretching.Specifications:- 1680 denier ballistic nylon fabric is tear and abrasion resistant.- Two-inch (50 mm) nylon webbing loops on the back of the pocket slide over a standard 2-inch webbing waist strap and secure the pocket into place.- Heavy duty Velcro secures pocket flap and resists sagging and stretching.- 4.5-in wide x 4.75-in tall x 1.75-in deep (11.4 cm x 12 cm x 4.5 cm)- 4 oz (113.3g)
113.85 EUR
Dive Rite Balanced Relief Valve Delrin
Dive Rite Balanced Relief Valve Delrin. Newly designed in 2012, our Balance Relief Valve is avcritical accessory for any drysuit diver, especially on long dives. Without a relief valve, divers tend to intentionally dehydrated themselves to avoid the "urge" during an extended bottom time dive. Hydration is critical to avoid decompression sickness and with our Balanced Relief Valve proper hydration is no longer a concern. Machined from Delrin, it is light weight so it will not add stress to drysuit material and it is corrosion resistant. The Relief Valve is equipped with a one-way valve so that the tubing is equalized with the air pressure inside the drysuit, which prevents the tubing from becoming crushed and stopping flow. Made in the U.S.A.Note: Installation requires a standard 5/8 inch punch, Dive Rite model no EX2786TOOL. We recommend installation by a professional drysuit repair center.
11.71 EUR
Dive Rite Basic Harness Shoulder Pads
Dive Rite Basic Harness Shoulder Pads. Protect your exposure suit and pad your shoulders with our basic webbing harness shoulder pads. Neoprene sleeves weave onto any 2-inch webbing harness prior to full assembly. Made in the U.S.A.